长光程空气质量自动监测仪原理及常见问题浅析

长光程空气质量自动监测仪是用来监测大气中各种污染物含量的专用仪器,采用国家环保部认可和美国环境保护署(USEPA)推荐的方法,利用光学差分吸收光谱技术研制而成,差分吸收光谱(DOAS,Differential Optical Absorption Spectroscopy)技术国外已广泛用于环境监测,国内也已形成产业.我站引入国产长光程系统(安徽铜陵)开展污染气体(SO2、NO2)24小时连续监测.本文就我站在使用国产长光程大气监测系统过程中出现的一些常见问题进行剖析,以供参考.     

Optimization of the dye-sensitized solar cell performance by mechanical compression

In this study, the P25 titanium dioxide (TiO₂) nanoparticle (NP) thin film was coated on the fluorine-doped tin oxide (FTO) glass substrate by a doctor blade method. The film then compressed mechanically to be the photoanode of dye-sensitized solar cells (DSSCs). Various compression pressures on TiO₂ NP film were tested to optimize the performance of DSSCs. The mechanical compression reduces TiO₂ inter-particle distance improving the electron transport efficiency. The UV–vis spectrophotometer and electrochemical impedance spectroscopy (EIS) were employed to quantify the light-harvesting efficiency and the charge transport impedance at various interfaces in DSSC, respectively. The incident photon-to-current conversion efficiency was also monitored. The results show that when the DSSC fabricated by the TiO₂ NP thin film compressed at pressure of 279 kg/cm², the minimum resistance of 9.38 Ω at dye/TiO₂ NP/electrolyte interfaces, the maximum short-circuit photocurrent density of 15.11 mA/cm², and the photoelectric conversion efficiency of 5.94% were observed. Compared to the DSSC fabricated by the non-compression of TiO₂ NP thin film, the overall conversion efficiency is improved over 19.5%. The study proves that under suitable compression pressure the performance of DSSC can be optimized.     

过氧化物酶应用的生物技术进展

介绍了过氧化物酶可以催化的四种反应类型 :氧化去氢反应、氧化卤化反应、双氧水歧化反应、氧传递反应。综述了过氧化物酶在有机合成等反应中的应用前景。认为氯过氧化物酶是一种应用最广的过氧化物酶 ,在催化有机反应时 ,具有更高的手性选择性和酶稳定性     

燃烧前CO2捕集技术在IGCC发电中的应用

由于整体煤气化联合循环（IGCC）发电本身的技术特点,使得其非常适合于进行燃烧前CO₂捕集。针对IGCC特点,提出了一种MDEA脱酸气结合湿法氧化法硫回收的燃烧前CO₂捕集流程。通过模拟计算,验证了流程的可行性。将其与IGCC发电系统集成,对比计算了有无燃烧前CO₂捕集的IGCC系统供电效率等相关参数,燃烧前CO₂捕集使IGCC供电效率降低约10个百分点。分析指出了导致包含燃烧前CO₂捕集的IGCC供电效率降低的3个因素：蒸汽消耗、燃料化学能损失和新增动力设备电耗,并据此确定了今后的优化方向。     

The Preozonation of Phenolic Aqueous Solution and Its Effect on the Improvement of Coagulation Treatment

Phenolic solutions are difficult to treat with coagulation processes because phenol is well soluble in water. However, with suitable preozonation, the ozonized organic components can be removed more effectively by coagulation processes. In order to avoid excessive preozonation, a good control on the degree of preozonation is crucial for practical applications. The degree of preozonation of phenolic solution was evaluated by measuring the phenol decomposition rate, ADMI value and ozone outlet concentration during the ozonation. Three characteristic times were observed, namely (1) ADMI value reaches the peak value during preozonation, (2) the ozone outlet concentration starts increasing, and (3) the ADMI value reaches the discharge standard (500 value, EPA Taiwan). These characteristic times provide the useful means as real-time control parameters on the extent of preozonation. The results of HPLC and GPC show that phenol is almost completely decomposed after 43?min of preozonation. The major components after preozonation are oxalic acid and coupling compounds. The preozonized solution, containing phenol decomposition products, was then subjected to coagulation treatments. The coagulation behavior of preozonized solution is dependent on the extent of preozonation. Three types of coagulant were investigated, namely alum, ferric chloride (FeCl₃) and poly aluminum chloride (PAC). Both PAC and FeCl₃ are effective coagulants for COD removal. As an example, phenol solution (initial phenol concentration=300?mg/L, C _{O 3},i=20?mg/L) was preozonized for 50 minutes, followed by FeCl₃ coagulation treatment. After preozonation and coagulation processes, the total COD and ADMI removal rates are as high as 70% and 80%, respectively. Most of the coupling compounds and oxalic acid are removed by the coagulant.     

Effects of molecular weight and molecular structure of low profile additives on the properties of bulk molding compound (BMC)

The effects of molecular weight and molecular structure of styrene(St)‐based and vinyl acetate(VAc)‐based low‐profile additive (LPA) on the curing kinetics and compatibility of unsaturated polyester (UP)/LPA system and linear shrinkage, water absorption rate, surface gloss and pigmentability of bulk molding compound (BMC) were investigated. Results show that the curing reaction rate decreases with an increase of the molecular weight of LPA due to the chain entanglement effect. The plasticizing effect of LPA on the (UP) network was reduced with an increase of the molecular weight of LPA. Water absorption of BMC increases as the molecular weight of LPA increases, implying that more microvoids were formed inside the BMC, resulting a lower linear shrinkage rate, and worse pigmentability. However, good shrinkage control LPA does not necessarily lead to a smoother surface and better surface gloss. Furthermore, modified LPAs possess better compatibility with UP, the final curing conversion of UP is elevated, and both better shrinkage control and surface properties are also observed.     

Effect of dispersion method and process variables on the properties of supercritical CO2 foamed polystyrene/graphite nanocomposite foam

In this study, polystyrene/nanographite nanocomposite foams were made by different compounding methods, such as direct compounding, pulverized sonication compounding, and in situ polymerization, to understand the effect of the process variables on the morphology of the nanocomposites and their foam. The foam was made by batch foaming using CO₂ as the blowing agent. Various foaming pressures and temperatures were studied. The results indicated that the cell size decreased and the cell morphology was improved with the advanced dispersion of the nanoparticles. Among the three methods, the in situ polymerization method provided the best dispersion and the resulting nanocomposite foam had the finest cell size and the highest cell density. In addition, adding nanoparticles as a nucleating agent can make foams of similar cell size and cell density at a much lower foaming pressure. This result can be explained by the classical nucleation theory. This discovery could open up a newroute to produce microcellular foams at a low foaming pressure. POLYM. ENG. SCI., 53:2061–2072, 2013. © 2013 Society of Plastics Engineers     

Hydrogen treatment-improved uniform deposition of Ag nanoparticles on ZnO nanorod arrays and their visible-light photocatalytic and surface-enhanced Raman scattering properties

ZnO nanorod arrays were synthesized by chemical bath deposition. After heat treatment in hydrogen or air, Ag nanoparticles were deposited on ZnO nanorod arrays by photo-reduction method. The size of Ag nanoparticles as well as the surface morphology, structure, composition, and optical property of ZnO nanorod arrays before and after the deposition of Ag nanoparticles were characterized by SEM, XRD, EDS, and UV/VIS/NIR spectrophotometer. As compared to the samples with heat treatment in air or without heat treatment, the ZnO nanorod arrays after heat treatment in hydrogen allowed Ag nanoparticles to be deposited more uniformly, densely, and numerously. Also, they exhibited higher efficiency for the visible light-driven photocatalytic degradation of Rhodamine 6G (R6G) dye. The effects of the amount of Ag nanoparticles, initial dye concentration, and temperature on the photocatalytic degradation efficiency were investigated. Furthermore, they also exhibited better surface-enhanced Raman scattering property for the detection of R6G dyes.     

聚合物包覆邻氨基苯甲酸铽配合物的制备与荧光性能

采用直接沉淀工艺,在聚乙烯吡咯酮-乙烯乙酸酯（PVP-VAc）嵌段共聚物在溶剂中形成的微反应器中,制备出表面包覆有嵌段共聚物的邻氨基苯甲酸铽配合物。通过X射线衍射谱（XRD）、透射电子显微镜（TEM）、荧光光谱（LS）、紫外（UV）和红外（IR）光谱对表面包覆的纳米铁粉的结构和形貌进行了分析,并用荧光分光光度计分析了其发光性能。XRD表明所制备的配合物是与配体和氯化铽完全不同的新的晶体,TEM显示样品为形状很规则的长柱状体,长约为150nm,截面为100nm的正方形。LS表明聚合物包覆的邻氨基苯甲酸铽配合物具有很好的荧光性能。紫外光谱说明配合物的紫外吸收主要表现为配体的吸收,红外光谱的分析说明邻氨基苯甲酸铽配合物表面包覆了PVP-VAc嵌段共聚物。     

Mechanical and antibacterial properties of modified nano‐ZnO/high‐density polyethylene composite films with a low doped content of nano‐ZnO

Nano‐ZnO/high‐density polyethylene (HDPE) composite films were prepared via melt blending and a hot compression‐molding process. The properties, including ultraviolet absorption, mechanical and antibacterial properties of the films, and plasticizing behavior of the composites, were investigated. The results show that the absorbance in the ultraviolet region of the HDPE films was enhanced after the addition of modified nano‐ZnO to the HDPE matrix. Also, we found that improvement in the HDPE films of the tensile strength and elongation at break was achieved by the incorporation of modified ZnO nanoparticles up to 0.5 wt % in contrast with the original nano‐ZnO/HDPE composite films. Antibacterial testing was carried out via plate counting, and the results indicate that the HDPE films doped with modified ZnO nanoparticles showed favorable antibacterial activity, especially for Staphylococcus aureus. However, the low doped content of modified nano‐ZnO in the HDPE matrix made the balance torque of the composites increase slightly. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010