大环分子低维导体

本文综述了大环分子面－面堆积结构的准一维导体的结构、性质、导电机理、合成方法及研究进展。     

The crystal structure of an Fe-superoxide dismutase from the hyperthermophile Aquifex pyrophilus at 1.9 A resolution: structural basis for thermostability

The incidence of stress fractures is increasing among competitive and recreational athletes as well as among children and the elderly. By understanding the continuum of bone's response to stress and maintaining an appropriate index of suspicion, the health care provider can diagnose these injuries appropriately. An accurate history and examination is essential and will differentiate stress fractures from other stress reactions. The more common stress fractures are discussed.     

Design of pole-assignment controller for systems with algebraic-equation constraint

In this paper we have studied the control of linear systems with algebraic-equation constraint. A pole-assignment controller with two-layer structure for such constrained systems has been presented. The objective of the controller is to assign the desired poles to constrained system and simultaneously force the corresponding closed-loop system to satisfy the constraint. The conditions for the existence of pole-assignment controller are discussed in different cases. The implementation algorithm of pole-assignment controller is also presented. An example is given to illustrate the validity of the method in this paper.     

Pullout tests of epoxy-coated reinforcement in concrete

The bond strength and slip of epoxy-coated reinforcing bars in concrete have been evaluated by carrying out single pullout and double pullout tests. In extended single pullout tests, slip measurements were made while tensile force was applied to reinforcing bars embedded in concrete. In double pullout tests, 20 cycles of load were applied at levels of steel stress between zero and 0·5 times characteristic steel strength. Strains were measured by electrical resistance strain gauges glued inside the bars. Both epoxy-coated and uncoated bars were used in the investigation, to obtain comparative results. The strain gradient along the bar was found to be less for the coated reinforcement. In general, the epoxy coating was found to increase slip in bond and thereby reduce the bond performance of coated bars.     

Kinetic model of block photopolymerization of glycidyl methacrylate to high conversion

The kinetics of glycidyl methacrylate block polymerization to high conversion was experimentally investigated with variations of the photoinitiator concentration, temperature, and power of UV illumination. The kinetic curves of this polymerization process contain three characterized sections of coordinates of “conversion–time,” namely: The first one is practically linear to a conversion of ≈0.5, the second represents, by itself, the autoacceleration process, and the third presents the autodecelation process. An additional peculiarity of such a polymerization process is poor reproduction of the kinetic measurements. This reproduction does not correspond to instrumental error. Derivation of a kinetic model for block linear polymerization was done. This model is, quantitatively, in good agreement with all the data of the experimental material. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3556–3569, 2002     

低压铝箔交流腐蚀研究

在３０Ｈｚ频率下，通过铝箔在ＨＣｌ＋Ｈ２ＳＯ４＋ＨＮＯ３＋Ｈ３ＰＯ４体系中的交流腐蚀，研究腐蚀液组成中腐蚀主体及缓蚀剂对铝箔腐蚀的作用，探讨腐蚀过程中电源频率、腐蚀液温度、电流密度及腐蚀时间对铝箔腐蚀的影响。腐蚀液组成的配比恰当，有利于比容的提高。在特定的频率下采用合适的腐蚀液温度、适宜的电流密度和腐蚀时间可以提高铝箔的静电容量。     

Enhancement of heat and mass transfer in a plane channel with turbulizers on one of the walls

The effect of turbulizing asperities positioned on one of the walls of a plane channel on the intensity of exchange processes near a smooth wall with injection of different working media is studied experimentally. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 70, No. 3, pp. 404–408, 1997.