ERP的发展、现状及展望

企业资源计划ERP已成为近期的热门话题，越来越多的企业已经开始采用MRPⅡ/ERP产品。本文作者就ERP发展历程，技术特点进行总结，对其发展进行展望，预示着未来随着ERP的完善，一种基于网络的全球化企业合作与虚拟企业运营的集成化企业管理系统必然产生。     

模糊数学识别火山岩岩性

针对火岩地层岩性识别成功率低的状况，应用模糊数学原理，建立模糊数学识别火山岩岩性模式，识别和划分火山岩地层岩性，以便进一步深入研究火山岩油气藏储层，选择8个反映火山岩岩性测井参数，确定阈值；利用所建立的火山岩岩性识别模式，对火山岩岩性进行分类；依据最大隶属原则，识别火山岩岩性，应用实地研究资料，识别10种火山岩岩性，并与岩心鉴定统计分析结果对比，一致性达85％。表明该方法识别火山岩岩性精度较高，在地质上具有很好的应用前景。     

中国陶瓷业如何与国际市场对接——访中国建筑卫生陶瓷协会秘书长缪斌

我国是陶瓷生产大国,近几年发展速度很快.2001年,我国的建筑陶瓷产量约20亿平方米,卫生瓷5000万件以上,全年全行业出口额超过2亿美元,创历史最好水平.加入WTO给我国陶瓷行业带来了很多机遇和挑战,但我们究竟与意大利、西班牙等陶瓷强国差距在哪里呢?记者最近走访了中国建筑陶瓷协会秘书长缪斌先生.恰逢秘书长刚从欧洲考察回来,便聊起这次欧洲之行……     

Set－up of a Pure Electron Plasma Device

An electron Penning-Malmberg trap,which can confine an electron column and provide a good platform to investigate the cross-filed transportation of strongly magnetized electron plasma ,has been set up.With the device,an electron plasma with a density of 10^7 cm^-3 can be confined for a relatively long time.The structure of the trap,electron source,as well as the way how th measure electron plasma density profile and velocity distrbustion are introduced in detail.     

单相开关磁阻电机及其控制

通过分析一种可以实现自启动的新型结构的永磁单相开关磁阻电机的基本工作原理，提出了一种性价比较高的控制方案，通过实验得出了结论。     

单晶凝固组织的样品尺寸效应

通过对不同直径的单晶样品的凝固实验，研究了样品尺寸对单晶凝固组织的影响规律，研究发现，随样品尺寸减小，单晶凝固组织被细化，尤其一次枝晶间距λ1和枝晶间γ′相尺寸对样品尺寸的依赖性更为明显；样品尺寸影响的要质在于此表面积的变化，进而对凝固过程温度梯度产生影响，最终作用于凝固组织和力学性能，一次枝晶间距λ1和枝晶间γ′尺寸与样品的比表面积近拟呈线性关系，样品尺寸变化，明显改变了单晶生长过程的温度梯度和合金的高温持久寿命。     

驱蚊酯的合成及应用研究

本文合成了一种高效低毒驱蚊剂-驱蚊酯[(insectifuge ester)[1],3-(Acetyl-butyl-amino)-propionic acid ethyl ester],并对其结构进行了全面鉴定,同时对其合成过程中所产生的副产物进行了分析测定。用驱蚊酯配成含2.3%驱蚊酯的花露水,并测试了其驱蚊效果,有效驱蚊时间可达5小时以上。     

建设群力新区水系工程的初步设想

就水系工程水源的选择、规划设计要点,提出了初步设想。     

超临界CO2流体萃取莪术挥发油的工艺研究

利用超临界CO2流体萃取技术,以榄香烯为目标物,研究了萃取压力、温度、时间、原料粒度和CO2流量对莪术挥发油萃取率的影响,建立了获得莪术挥发油的最佳工艺条件.实验结果表明,莪术粉粒度40目,萃取压力18 MPa,温度50℃,萃取时间120 min,流量20～30 kg/h条件下,挥发油中榄香烯含量最高,相对含量为2.8%,为以后精馏研究奠定了基础.     

Effect of boron on the low-cycle fatigue behavior and deformation structure of INCONEL 718 at 650 °C

Symmetrical push-pull low-cycle fatigue (LCF) tests were performed on INCONEL 718 (IN718) containing 12, 29, 60, and 100 ppm B at 650 °C. The results showed that all the alloys experienced a relatively short period of initial cyclic hardening at low strain amplitudes, followed by a regime of saturation or slightly continuous cyclic softening. The initial cyclic hardening phase decreased with increasing strain amplitudes, and disappeared at the high strain amplitudes. A serrated flow was observed in the plastic regions of cyclic stress-strain hysteresis loops. The saturated cyclic stress amplitude at a given strain amplitude was highest for the alloy with 60 ppm B, and lowest for the alloy with 12 ppm B. The LCF lifetime increased with increasing B concentration up to 60 ppm, and then decreased as the B content increased from 60 to 100 ppm. Fractographic analysis suggested that the fracture mode changed from intergranular to transgranular cracking as the B concentration increased. The characteristic deformation microstructures produced by LCF tests at 650 °C, examined via transmission electron microscopy, were regularly spaced arrays of planar deformation bands on {111} slip planes in all four alloys. A ladderlike structure was observed in some local regions in the alloy with 12 ppm B. Heavily deformed planar deformation bands were observed in the fatigued specimens with 100 ppm B. The mechanism of improvement in the LCF life of IN718 due to B addition is discussed.