非平衡等离子体协同作用光催化剂催化降解苯

采用非平衡等离子体与光催化剂相结合,对苯的降解进行了实验研究。考察了以不同吸附能力的玻璃球和γ-Al2O3为载体对苯降解率、碳平衡、CO2选择性、NOx及O3生成量的影响;研究了以γ-Al2O3为载体时,水蒸气含量对苯的降解率、碳平衡、CO2选择性、NOx及O3生成量的影响。实验结果表明,以具有吸附性的γ-Al2O3为载体可提高苯的降解率;当能量密度为618J/L时,苯的降解率可达98%;同时可降低O3的生成量,但NOx生成量增加;以γ-Al2O3为载体时,随水蒸气含量的增加,苯的降解率降低,特别是在低能量密度时,水蒸气对苯降解率的影响更为显著,但水蒸气的加入可抑制O3的生成,同时可提高碳平衡值。     

溶剂对溶胶-凝胶法制备LaMnFe2Al9O19催化剂的影响

摘要 用溶胶凝胶法制备六铝酸盐催化剂LaMnFe2Al9O19，通过BET、XPS、XRD等技术，对催化剂的结构和性质进行了研究，主要考察了在制备过程中不同的醇做溶剂对催化剂结构及其甲烷催化燃烧活性的影响。结果表明：不同醇做溶剂所制备的催化剂LaMnFe2Al9O19 在1200℃焙烧后都可以形成完整的六铝酸盐晶型，且具有较高高温稳定性。同时对于催化剂的的催化性能也有较大的影响，用异丙醇做溶剂所得催化剂的催化活性最高，并保持了较大的比表面积。     

钻井企业技术创新评价模型研究

随着中国钻井企业改革的深化和市场经济的不断发展完善，在中国钻井企业中将会出现技术创新的热潮。以当前钻井企业所面临的问题与挑战为背景，根据近年来国内外技术创新与评价理论的最新研究成果，结合当前钻井企业技术创新的实际，构建了钻井企业技术创新评价指标体系，运用层次分析法和模糊综合评价法构建了钻井企业的技术创新评价模型，并进行了实例分析。     

云龙水库大坝表面变形观测资料分析

1工程概况云龙水库是昆明市掌鸠河引水供水工程的水源工程,位于昆明市西北部禄劝县的云龙乡岔河村附近,距昆明市区约86km。大坝坝址选在金沙江水系二级支流掌鸠河上游峡谷河段内,初期规模正常蓄水位2087.97m,校核洪水位2091.98m;终期规模水库正常蓄水位2089.67m,设计洪水位2092.59m,校核洪水位2093.58m。初期规模总库容4.48亿m3,终期规模总库容4.84亿m3,属大(2)型水库工程,工程等别为Ⅱ。水库枢纽建筑物由大坝,泄洪、导流隧洞,引水隧洞,溢洪道等组成。除溢洪道按初期规模兴建外,其余枢纽建筑物均按终期规模兴建。泄洪、导流和引水建筑物布置…     

Inventory routing with continuous moves

The typical inventory routing problem deals with the repeated distribution of a single product from a single facility with an unlimited supply to a set of customers that can all be reached with out-and-back trips. Unfortunately, this is not always the reality. We introduce the inventory routing problem with continuous moves to study two important real-life complexities: limited product availabilities at facilities and customers that cannot be served using out-and-back tours. We need to design delivery tours spanning several days, covering huge geographic areas, and involving product pickups at different facilities. We develop an innovative randomized greedy algorithm, which includes linear programming based postprocessing technology, and we demonstrate its effectiveness in an extensive computational study.     

Nash equilibrium bidding strategies in a bilateral electricitymarket

This paper examines bidding strategies in a bilateral market in which generating companies submit bids to loads. A load accepts electricity delivery from the generator with the lowest bid at its bid price as long as this price is not higher than the load's willingness to pay. Necessary and sufficient conditions of Nash equilibrium (NE) bidding strategy are derived based on a generic generating cost matrix and the loads' willingness to pay vector. The study shows that in any NE, efficient allocation is achieved. Furthermore, all Nash equilibria are revenue equivalent for the generators. Based on the necessary and sufficient conditions, this problem is formulated as an optimal assignment problem. Network optimization techniques are applied to calculate NE bid prices for the generators     

TEM study of PLZT ceramics

The microscopic structures of PLZT(7.9/70/30 and x/65/35, x = 7 or 8) ceramics were studied by means of transmission electron microscopy. The presence of micro-regions in PLZTs was first verfied.     

乳化炸药混装车水孔爆破的优越性

该文分析了应用袋装炸药装填水孔爆破产生拒爆、"冲天炮"、根底偏高和爆破效果差等问题,然而应用乳化炸药混装车装填水孔可以解决这些问题,并且爆破后具有根底平整、大块率低、毒气少和综合效益高等优点.以三峡永久船闸旁侧泄水箱涵工程和江苏田湾核电站工程为例进行了分析.     

Analyses of the practical adhesion strengths of the metal/polymer interfaces in electronic packaging

There is a plethora of techniques to measure the adhesion strength of metal/polymer interfaces. However, the practical adhesion strength, which is the work done in separating the film from the substrate (or one film from another), is very sensitive to the test methods and the mechanical effects, such as the residual stress, thickness and mechanical properties of the layers, strain rate, and phase angle. Deriving intrinsic-adhesion properties of the interfaces, which are independent of such parameters, from the practical adhesion-strength measurements is a formidable task. In the present work, data from the three commonly used adhesion tests; pull-out, 90°-peel, and T-peel tests are compared with the intrinsic-adhesion properties of the interface, such as the interface-fracture toughness or the interface-fracture energy, and their implications are discussed. Material systems analyzed were Cu-based lead frame/epoxy-molding compound (EMC) and Cu/Cr/polyimide.     

PP-g-MAH对PA6/PP/TLCP三元共混物的增容改性作用

研究了PP-g-MAH对PA6／PP／TLCP三元共混体系的增容作用以及对共混物流变性能和力学性能的影响。通过共混物的DSC、SEM、POM、流变性能和力学性能测试，结果表明，PP－g-MAH对共混体系有明显的增容作用，共混物的力学性能（拉伸强度和冲击强度）得到提高；由于TLCP的加入，共混物的熔体粘度大大低于PA6的熔体粘度。