天荒坪电站500 kV开关站开挖与边坡整治施工——兼论开挖爆破对高边坡稳定的影响及对策

在大型水利水电施工中，经常遇到岩质高边坡稳定问题，天荒坪抽水蓄能电站５００ｋＶ开关站所处的地形地质条件非常复杂，本文着重介绍在边坡开挖和支护过程中，根据不同的地形地质情况所采取的控制爆破和支护措施。     

Association between cigarette smoking and lipid peroxidation in a controlled feeding study

BACKGROUND: Cigarette smoke may promote atherogenesis by producing oxygen-derived free radicals that damage lipids. However, evidence in support of this hypothesis is inconsistent because most studies did not control for aspects of diet (antioxidants and lipid substrate) that may confound the association between smoking and measures of lipid peroxidation. METHODS AND RESULTS: The relationships between cigarette smoking and two measures of lipid peroxidation, breath ethane (an in vivo assay) and thiobarbituric acid-reactive substances (TBARS, an in vitro assay), were examined in 123 adults (11% of whom were smokers) participating in a controlled feeding study. After 3 weeks of controlled feeding on a common diet (36% total fat, 14% saturated fats, 6% polyunsaturated fats, and 12% monounsaturated fats), breath and fasting serum samples were collected for measurement of ethane and TBARS, respectively. Baseline characteristics of smokers and nonsmokers were similar, including several indices related to diet and nutritional status (albumin, cholesterol, body mass index, and oxygen radical-absorbing capacity). Cigarette smokers had significantly higher breath ethane (8.88 versus 1.71 pmol/L; P<.0001) and TBARS (24.0 versus 20.7 micromol/mL; P=.008) than nonsmokers. The interval between breath collection and the time the last cigarette was smoked was significantly and inversely correlated with breath ethane. Neither measure of lipid peroxidation was associated with measures of serum cholesterol or albumin, body mass index, or serum oxygen radical-absorbing capacity. CONCLUSIONS: Cigarette smokers have higher rates of in vivo and in vitro lipid peroxidation. These results support the hypothesis that the atherogenic effects of smoking are mediated in part by free radical damage to lipids.     

高含硫钻井液缓蚀剂的合成及性能研究

本文合成了抑制H₂S腐蚀的咪唑啉类缓蚀剂,并研究了它们的性能。正交试验表明,最佳合成条件是:反应温度:190～200℃;酸:胺(mol比)=1:1.05;反应时间以3～5小时为宜。根据以上条件合成的缓蚀剂,在含有3200mg/lH₂S的泥浆中,用量为0.2%时,抑制效果能达到80～90%,与碱式碳酸锌复配使用时,能提高缓蚀效率和降低碱式碳酸锌的用量,并发现缓蚀剂与CaO之间具有明显的协同效应。泥浆流变性能试验表明,缓蚀剂能提高泥浆的动切力和动塑比,对失水量影响不大。此外,利用X-射线衍射试验证明:(1)低碳钢在含H₂S的泥浆中,腐蚀产物的主要组成为Fe₉S₆;(2)H₂S会破坏FCLS的稳定性,分解出Fe²⁺,与H₂S反应生成面心立方的Fe₂S₄。     

土壤γ辐射剂量率间接测量中的^222Rn析出和含水量修正

本文针对Ｂｅｃｋ公式的局限性，对土壤的含水量和＾２２２Ｒｎ析出引起的γ辐射剂量率变化进行了修正。通过浙江省５７６组测量数据的实验拟合，给出了剂量率计算的修正公式。该公式应用到浙江省自身的测量数据上，使计算的总体均值与实测均值仅相差０．８％；每一点位的计算值与实测值相比，平均仅相差３．４％，其比值离散性与实验误差相一致。而Ｂｅｃｋ公式的计算结果与实测剂量率相比较，以上两项分别偏离＋１０％和１５．２％     

触摸输入技术探析

本文扼要概述触摸输入的４种技术，及其应用与性能比较。     

快速锁相频率合成器

介绍了锁相合成技术，对提高可编程分频器速度作了分析，估算了跳频时间，提出了进一步缩短跳频时间的措施。     

ATM网络中漏桶流量控制特性的研究

本文对ＡＴＭ（异步转移模式）网络中话音、数据和图像业务的漏桶流量控制特性进行了研究。计算机模拟结果表明，由于各种业务内在的相关性不同，相应的漏桶流量控制特性有较大的差异。漏桶参数的选择对于各种业务具有不同的公平性，因而应根据业务的特性来设计漏桶参数。     

我国有线电视事业的现状和发展

本文详细系统地介绍了我国有线是视发展历史和现状，及其经营和管理方法。重点介绍了北美的ＣＡＴＶ技术发展动向。最后，指出我国ＣＡＴＶ事业发展中的应用重视的问题。     

Cu－Zn－Al合金中贝氏体的有序性

本文用Ｘ射线研究了Ｃｕ－２０Ｚｎ－６Ａｌ（ｗｔ％）合金中贝氏体结构的有序性，并与马氏体结构进行了比较，实验表明，从高温Ｂ２母相和低温Ｌ２１母相生成的贝氏体中（１１５）和（２０５）衍射峰或（１２１０）和（２０１０）衍射峰是重叠的，对生成的贝氏体进行一段时间的保温或缓慢冷却处理，其衍射峰的特征并不改变，这与马氏体（１１５）和（２０５）衍射峰或（１２１０）和（２０１０）衍射峰的分离特性不相符合。说明贝氏体结构有序度与马氏体明显不同，它的形成不可能继承母相的有序度。     

A super element model for non-linear analysis of stiffened box structures

A numerical model for non-linear static and dynamic analysis of stiffened box structures is presented. The model is based on a new super element formulation which provides complete C¹ continuity for both plate and beam elements. Geometric and material non-linearities are included and the temporal equations are solved by the implicit Newmark-β method with Newton-Raphson subiteration. The new formulation has been applied to the static, vibration and transient analysis of various structures such as flat plates, folded plates and rectangular boxes. Both isotropic and beam stiffened structures are considered and the results obtained are compared with other available solutions. It is observed that the new super element formulation can provide reasonable solutions to both linear and non-linear problems of stiffened box structures. The mathematical formulation of the model is presented in this paper, while the numerical verifications are given in the companion paper.¹