Antioxidative activities of some peptides isolated from hydrolyzed potato protein extract

Three peptides (5A, 5C and 6C), purified from potato protein hydrolysate fractions, possessed antioxidative activities. Isolation and purification were carried out using gel permeation chromatography and successive reverse-phase HPLC. These three peptide fractions were sequenced and identified as Phe-Gly-Glu-Arg, Phe-Asp-Arg-Arg and Phe-Gly-Glu-Arg-Arg, respectively. The fractions 5A, 5C and 6C inhibited linoleic acid oxidation by 55.3%, 58.5% and 61.7% using β-carotene decolorization assay system, while the inhibition ratio was 32.1%, 93.0% and 93.4% in the ferric thiocyanate assay system, respectively. The peptide fractions 5A, 5C and 6C also repressed lipid oxidation by 24.2%, 14.7% and 26.4% in the erythrocyte membrane ghost assay system, respectively. Oral administration of 100 mg/kg of body weight of the chemically synthesized peptides, 5A, 5C and 6C to rats (male Wistar) 30 min prior to ethanol injection reduced ethanol-induced gastric mucosal damage by 67.9%, 57.0% and 60.3%, respectively. Conclusively, these peptides have shown real potent antioxidative activities and could further be investigated for potential use as food additives.     

One-step formation of ethyl methyl ketone from 1-butene and water on ultrastable Y-type zeolite catalyst

Proton exchanged ultrastable Y-type zeolite with silica/alumina = 40 showed a pronounced catalytic activity for the formation of ethyl methyl ketone directly from 1-butene and water. The formation rate of ethyl methyl ketone was much higher than those on MoO₃-based catalysts in the oxidation of 1-butene by oxygen. It was suggested that the basic site necessary for the formation of ethyl ketone directly from 1-butene and water would be the pentacoordinated Al.     

Functional analyses of neutrophil-like differentiated cell lines under a hyperglycemic condition

Diabetic patients are prone to severe bacterial infections. The functional alterations of neutrophils by hyperglycemia are thought to be partially responsible for such infections. In this study, we investigated the functional changes of neutrophil-like differentiated cell lines (dHL-60, dTHP-1, and dNB-4) by treatment with 5.5 mM, 11 mM, or 35 mM of glucose. In dHL-60 cells, the incubation with high glucose (35 mM) resulted in the enhancement of cell aggregation, the suppression of cellular fragility, the induction of reactive-oxygen species (ROS) production by phorbol myristate acetate (PMA) stimulation, and the impairment of phagocytosis. In dTHP-1 cells, the treatment with higher glucose generated the suppression of cellular fragility and extremely impaired phagocytosis (by 35 mM), and induced ROS production due to PMA stimulation (by 11 mM). Furthermore, the higher glucose exposure to dNB-4 cells enlarged intracellular vacuoles (by 35 mM) and induced ROS production due to PMA stimulation (by 11 mM). Since the ROS generation of those cells was enhanced only after PMA stimulation under the higher glucose conditions, glucose may have a priming effect rather than a triggering effect. These extraordinary sensitivities caused by the higher glucose treatments may reflect the dysfunction or overactivation of neutrophils.     

Characteristics of porous polymer composite columns prepared by radiation cast-polymerization

Porous polymer composite columns having porous structure were prepared by radiation cast-polymerization of hydrophilic monomers at low temperature and their characteristics were studied. The porosity of the polymer increased with decreasing monomer concentration. The elution time of water in the polymer column increased with increasing monomer concentration and with decreasing irradiation temperature. The elution time was dependent on the degree of hydration of the polymer. The polymer with a degree of hydration of 0.2 to 0.4 gave the minimum elution time. The elution time decreased with the addition of porous inorganic substances.     

Development of a frequency-detuned interferometer as a prototype experiment for next-generation gravitational-wave detectors

We report on our prototype experiment that uses a 4-m detuned resonant sideband extraction interferometer with suspended mirrors, which has almost the same configuration as the next-generation, gravitational-wave detectors. We have developed a new control scheme and have succeeded in the operation of such an interferometer with suspended mirrors for the first time ever as far as we know. We believe that this is the first such instrument that can see the radiation pressure signal enhancement, which can improve the sensitivity of next-generation gravitational-wave detectors.     

Excess micromotion compensation of trapped ions in a linear Paul trap for trace isotope analysis

Excess micromotion of trapped calcium ions was detected and compensated in our linear Paul trap apparatus for trace isotope analysis. The micromotion was detected by Charge-coupled device (CCD). camera and radio frequency (rf) correlation method. We found that 230 and 2280 V of compensation voltages were needed for x- and y-axis compensation in our apparatus, respectively. The z-axis micromotion was confirmed by the experiment and its cause was investigated by finding a shape of z-axis confinement field. The confinement field was indeed distorted in our apparatus and it gave rise to the trapped ion to shift from potential center. And the micromotion of r-direction was transferred to the z-axis by the distorted confinement field. The z-axis micromotion was suppressed by increasing cap voltage of trap.     

V–I characteristics of solid polymer electrolytic (SPE) dehumidifier

Measurements of the V–I characteristics of a solid polymer electrolytic (SPE) dehumidifier were done using a modified SPE dehumidifier with four electrodes which included two electrodes to carry the main current and the other two electrodes to measure the voltages applied to the electrical double layer, which are the boundary voltages between the electrodes and the SPE membrane. The measured results were analyzed using the Butler-Volmer equation to examine the validity of the measurements. The current flowing in the dehumidifier is produced by the decomposition of water near the anode. Therefore, under a steady-state condition, the current should be proportional to the supply rate of water to the anode. On the other hand, a two-layer model for the SPE dehumidifier presented in our previous article showed that the current flowing in the dehumidifier was roughly proportional to the water content in the vicinity of the anode. These results were introduced for interpretation of the V–I measurements of the SPE dehumidifier. It was concluded that the dehumidifier current was expressed in the form of a Butler-Volmer equation as a function of the electrode boundary voltages which were the voltages across the boundary between the electrodes and the SPE membrane. An experimental formula for the current under a steady-state condition was developed as a function of the water content near the anode and the boundary voltages.     

An FPGA implementation of hard‐wired sequence control system based on PLC software

Although a programmable logic controller (PLC) has been widely adopted for the sequence control of industrial machinery, its performance does not always satisfy the recent requirements in large and highly responsive systems. With the state‐of‐the‐art field programmable gate array (FPGA) technology, it is possible to implement a control program with hard‐wired logic for higher response and reduced implementation cost/space. This approach is also worthwhile for transmigration of legacy PLC software into forthcoming FPGA‐based control hardware. This study presents a systematic method to implement a hard‐wired sequence control from PLC software. PLC instructions are converted into VHDL codes, and then implemented as logic circuit with various peripheral functions. Productive PLC programs were examined with Mitsubishi Electric FX2N PLC and Altera Stratix II FPGA, and were shown to fit into a common FPGA chip. A straightforward Sequential design was estimated to be 184 times faster than PLC, while a performance‐oriented Flat design was estimated to be 44 times faster than Sequential design (i.e., 8050 times faster than PLC). A practical perfect layer winder system was actually built and successfully operated with our FPGA control board, whose logic design was implemented with our tools. © 2011 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Predicting the Life Span of Dies Used for Soft Magnetic Core Motors

This paper describes a method of predicting the life span of the dies used in motor manufacture from soft magnetic composites (SMCs). In the present study, a clawtooth motor was used. The method involves performing a stress analysis of a die followed by fatigue testing of test pieces. In the analysis, the SMC was assumed to be in powder form and its yield function was derived by a simple method. In addition to the analysis, we describe a simpler and more effective method in which the properties of the SMC are treated as boundary conditions. In the fatigue tests, we used test pieces that simulated the shape and construction material of the die. To predict the life span of the die, we evaluate the SN diagram, which represents the relationship between the maximum stress and fatigue life with respect to the stress generated in the die. The life expectancy of a new die, which is about 100 cycles of use, is found to agree substantially with its actual life. Furthermore, we explain how to extend the life span of a die to the targeted life span, namely, more than 200,000 cycles of use, by changing its shape to reduce stress.     

Calculation of the Characteristics of Salient‐Pole Synchronous Machines Assisted by Permanent Magnets on the Basis of the Operating Principle

In this study we investigate a method for accurately calculating the characteristics of salient‐pole synchronous machines assisted by permanent magnets. First, the operating principle of the machines is investigated by using both finite element analysis and a simple magnetic circuit. Then, a theoretical representation of the assist effect on the permanent magnets is derived based on the magnetic circuit. Finally, the measured and calculated results are compared in order to confirm the validity of the proposed calculation method. We show that the load characteristics of the proposed machine can be accurately estimated from the no‐load and short‐circuit characteristics of the conventional machine without permanent magnets, and the size and magnetization of the inserted permanent magnets.