Regeneration characteristics of desiccant rotor with microwave and hot-air heating

Microwave heating, because of its advantages of direct and rapid heating of materials, has the potential to be employed as a novel regeneration method of desiccant rotors in humidity conditioners. We proposed a combined regeneration process, which combines microwave heating and conventional hot-air heating. The system is expected to achieve high heating rate during an initial regeneration period by assisting water desorption using the additional energy of the microwave. In this study, the regeneration characteristics of a desiccant rotor were experimentally investigated under conditions of microwave heating, hot-air heating, and combined heating at various microwave powers and hot-air temperatures. The effectiveness of the combined regeneration was evaluated in terms of the regeneration ratio, the initial regeneration rate, the temperature distribution in the rotor, and finally in terms of the energy consumption. It was demonstrated that combined heating was effective at leveling non-uniform temperature distribution in the rotor. Combined heating achieved higher ratios and initial rates in regeneration compared to just microwave and hot-air heating. This result was obviously attributed to the additional input of microwave energy, resulting that average rotor temperature increased by microwave absorption of rotor. Moreover, it was also effective for enhancement of regeneration to level the temperature distribution in the rotor by combination of two heating methods with different heating mechanisms. Both the initial regeneration rate and the equilibrium regeneration ratio for combined heating were found to increase as the microwave power increased. A linear relationship was observed with respect to microwave power. From the viewpoint of energy consumption, it may be possible to apply combined and microwave heating to humidity control systems that switch between adsorption and regeneration in short cycle times, if the conversion and absorption efficiencies of the microwave are significantly improved.     

小型高速艇舱室减振降噪设计

小型高速艇的减振降噪是近几年经起重视的，本文通过对间接的，有限的噪声振动源资源的分析研究，预估了一类小型高速艇各舱室的噪声级，根据国外近期同类艇的噪声水平以及总体减振降噪和多方面约束条件综合测定了该艇的减振降噪方案，并在此基础上进行了声强激励和振动激励条件下舱室模型综合减振降噪效果试验，结果表明，所制定的减振降噪方案其效果良好，实艇实测结果达到设计指标要求。     

Growth of emerald crystals from PbO · V2O5 flux

The flux growth of emerald crystals by slow cooling in the PbO · V₂O₅ flux is reported. The crystals exhibited the typical emerald-green colour, were up to 1.8 mm in size and transparent. Their form was a regular hexagonal rod bounded by the well-developed {0001} and {10ˉ10} faces. The solubility of emerald in PbO · V₂O₅ was also investigated; about 9.0 g emerald was dissolved in 100 g PbO · V₂O₅ at 1200 °C. The solubility decreased gradually with decreasing temperature. Taking the solubility data into account, the presence of undissolved particles in the solution was found to be a necessary condition for the growth of large emerald crystals. Unsaturated solution at a soak temperature produced good and relatively small emerald crystals in a subsequent cooling experiment. Advantages of the PbO · V₂O₅ flux are also mentioned. Emerald crystals showing various kinds of imperfections, and even good crystals, were also present.     

Two dimensional shape optimization using partial control and finite element method for compressible flows

The objective of this study is to determine the two dimensional shape of a body located in a compressible viscous flow, where the applied fluid force is minimized. The formulation to obtain the optimal shape is based on an optimal control theory. An optimal state is defined as a state, in which the performance function defined as the integration of the square sum of the applied fluid forces is minimized due to a reduction in the applied fluid forces. Compressible Navier–Stokes equations are treated as constraint equations. In other words, the body is considered to have a shape that minimizes the fluid forces under the constraint of the Navier–Stokes equations. The gradient of the performance function is computed using the adjoint variables. A weighted gradient method is used as the minimization algorithm. The volume of the body is assumed to be the same as that of the initial body. In the case of the algorithm used in this study, both the creation of a structured mesh around the surface of the body and the smoothing procedure are employed for the computation of gradient. In this study, a remeshing technique based on the structured mesh around the body changing its configuration in the iteration cycle is employed. For the correction to keep the volume constant, the surface coordinates are moved along the radial direction. For the discretization of both the state and adjoint equations, the efficient bubble function interpolation presented previously by the authors [18] is employed. The algorithm, which is known as the partial control algorithm, is applied to the numerical procedure to determine the movement of the coordinates. In the case of the gradient method, in order to avoid the convergence of the final shape to the local minimum shape, the new algorithm, which is called the partial control algorithm, is presented in this study. In numerical studies, the shape determination of a body in a uniform flow field is carried out in 2D domains. The initial shape of the body is assumed to be an elliptical cylinder. The shape is modified by minimizing the applied fluid forces. Finally, the desired shape of a body, whose performance function is reduced and converged to a constant value, is obtained. By carrying out a procedure that involves the use of the partial control algorithm, the desired shape of a body, whose performance function is reduced further, is obtained. Stable shape determination of a body in a compressible viscous flow is carried out by using the presented method. It is indicated that the optimal shape can be obtained by using the partial control algorithm.     

On the pseudo-freeness and the CDH assumption

The notion of pseudo-free group was first introduced by Hohenberger (Master’s thesis, EECS Dept., MIT, 2003). Rivest (TCC 2004. LNCS 2951, 505–521, 2004) formalized it and showed that several standard cryptographic assumptions hold on pseudo-free groups, such as the RSA assumption, the strong RSA assumption and the discrete logarithm assumption. Rivest (TCC 2004. LNCS 2951, 505–521, 2004) also proposed some variations of pseudo-free group, and those were formalized by Hirano and Tanaka (Research Reports, Series C: Computer Science, C-239, Tokyo Institute of Technology, 2007). In this paper, we study the relationships among such variations of pseudo-free group. We show that the pseudo-freeness implies the weak pseudo-freeness, and that the pseudo-freeness is equivalent to the pseudo-freeness with generalized exponential expressions. We also show that the computational Diffie-Hellman assumption holds on pseudo-free groups in a slightly varied form.     

The effects of infusion of trieicosapentaenoyl-glycerol emulsion on extravascular lung water during myocardial ischemia and reperfusion in dogs

To test the effects of eicosapentaenoic acid (EPA) infusion on pulmonary edema induced by coronary ligation and reperfusion, extravascular lung water (EVLW) was measured in situ by the thermal-dye double indicator dilution method in dogs. In the control group of five dogs, 30 mL of a 10% soybean oil emulsion was infused through a leg vein. One hour after infusion, the left anterior descending coronary artery below the first diagonal branch was ligated for 15 min and then reperfused for 30 min. In the EPA group, six dogs were similarly treated with an emulsion of a 10% trieicosapentaenoyl-glycerol (90% pure). EVLW, pulmonary capillary wedge pressure, mean pulmonary artery pressure, mean blood pressure, and cardiac index were measured before and 15 min after coronary ligation, and 15 min and 30 min after coronary reperfusion. There were no significant differences in the hemodynamic indices between the two groups. EVLW significantly increased up to two times of baseline during coronary ligation in the control group (P< 0.05) and more during reperfusion (P<0.01), whereas EVLW did not increase in the EPA group. In conclusion, EPA inhibited EVLW accumulation and may be useful for ameliorating one of the ischemia-reperfusion-induced complications, pulmonary edema.     

The strength properties of iron aluminides

For the development of Fe−Al alloys as structural materials, a deep understanding of slip and deformation properties is necessary. In particular, since mechanical properties of the iron aluminides are affected by excess vacancy strengthening as well as the positive-temperature dependence of yield stress, controlling these strength features is essential. In this article, the strength properties of iron aluminides are reviewed. Author’s Note: All compositions are provided in mole percent. Kyosuke Yoshimi earned his Ph.D. in materials science and engineering at Tohoku University in 1997. He is currently a research associate at Tohoku University. Shuji Hanada earned his Ph.D. in materials science and engineering at Tohoku University. He is currently a professor at Tohoku University. Dr. Hanada is also a member of TMS.     

Correlation of tensile properties,deformation modes,and phase stability in commercial β-phase titanium alloys

The effect of plastic deformation mode on tensile properties of quenched commercial β-phase titanium alloys has been investigated at approximately constant grain size and oxygen content. In addition, stability of β-phase has been estimated from ω-reflections or diffuse streaking in electron diffraction patterns in a manner similar to the previous works on binary β-phase titanium alloys. Dominant mode of plastic deformation is {332}<113> twinning in the alloys with large instability of β-phase, such as Ti-11.5Mo-6Zr-4. 5Sn and Ti-15Mo-5Zr, and is crystallographic slip in the alloys with small instability of β-phase, such as Ti-15Mo-5Zr-3Al, Ti-3Al-8V-6Cr-4Mo-4Zr, Ti-15V-3Cr-3Al-3Sn, Ti-8Mo-8V-2Fe-3Al, and Ti-13V-11C-3Al. Twinning leads to low yield strength and large elongation, while slip results in high yield strength and small elongation in agreement with binary and termary β-phase titanium alloys.