Mixture distribution measurement using laser induced breakdown spectroscopy in hydrogen direct injection stratified charge

Reduction in cooling loss due to the heat transfer from burning gas to the combustion chamber wall is very important for improving the thermal efficiency in hydrogen engines. The previous research has shown that the direct injection stratified charge can be a technique to reduce the cooling loss and improve thermal efficiency in hydrogen combustion. For effective reductions in cooling loss by the stratified charge, it is very important to know the relation between the fuel injection conditions and mixture distribution. The current research employs the laser induced breakdown spectroscopy as a method to measure the hydrogen concentration distribution in the direct injection stratified charge. Measurement of instantaneous local equivalence ratio by the method clears the characteristics of mixture formation in hydrogen direct injection stratified charge. This research also tries to actively control the mixture distribution using a split fuel injection.     

Synthesis and chiroptical properties of helical poly(phenylacetylene) bearing optically active chiral oxazoline Pendants

The novel optically active (S)-4-benzyl-2-(ethynylphenyl)-oxazoline (BnEPhOx) was successfully prepared and polymerized using rhodium catalyst ([Rh(nbd)Cl]₂) to obtain the moderate molecular weight poly(phenylacetylene)s bearing chiral oxazoline derivatives with high yields (≥90%). The ¹H NMR spectra demonstrated that the resulting polymers had high stereoregular structures. Moreover, the poly(phenylacetylene)s bearing chiral oxazoline exhibited better thermal stability than poly(phenylacetylene). The resulting polymers showed higher absolute values of optical specific rotation than the monomer. The polymers also exhibited intense CD signal in the region of the π-π1 band of the conjugated polyacetylene backbone in chloroform solution. The results of specific rotation and CD spectroscopy indicated that all the polymers adopted higher-order structure with predominantly one-handed screw sense.In addition, the resulting polymers emitted fluorescence under UV irradiation.     

Determination of sucralose in foods by HPLC using pre-column derivatization

The development of a sensitive pre-column derivatization high-performance liquid chromatography (HPLC) method for determination of sucralose is reported. Sucralose is converted into a strongly ultraviolet (UV)-absorbing derivative, possessing strong absorption at 260 nm, by treatment with p-nitrobenzoyl chloride (PNBCl). Homogenized samples were dialyzed and washed with a Bond Elut ENV cartridge, then the eluate was evaporated to dryness and the residue was derivatized. Subsequently, the sucralose derivative was purified with hexane-ethyl actate (9:1) in a silica cartridge, and then the sucralose derivative was eluted with acetone. HPLC was performed on a phenyl column, using acetonitrile-water (73:27) as a mobile phase with UV detection (260 nm). The calibration curve was linear in the range of 1 microgram/mL to 50 micrograms/mL of sucralose. The recoveries of sucralose from eight kinds of foods spiked at the levels of 0.20 and 0.05 g/kg of sucralose were more than 76.2% with SD values in the range from 0.90% to 4.31%. The quantitative limit of the developed method was 0.005 g/kg for sucralose in samples.     

Composition dependence of young’s modulus in Ti-V, Ti-Nb, and Ti-V-Sn alloys

The Young’s modulus of Ti-V and Ti-V-Sn alloys quenched from the β-phase region after solution treatment and cold rolling was investigated in relation to alloy compositions, microstructures, and constituent phases. The composition dependence of the Young’s modulus for quenched Ti-V binary alloys shows two minima of 69 GPa at Ti-10 mass pct V and 72 GPa at Ti-26 mass pct V. Between the two compositions, athermalω or stress-induced ω is introduced in retainedβ phase and increases Young’s modulus. That is, a low Young’s modulus is attained unless alloys undergoω transformation. In Ti-5 and -8 mass pct V, which under goα′ (hcp) martensitic transformation on quenching, the Young’s modulus further decreases by cold rolling, which can be reasonably explained by the formation ofα′ rolling texture. Comparing Young’s modulus in Ti-V binary alloy with that in Ti-Nb binary alloy, it is found that Young’s modulus is remarkably increased by athermal- or stress inducedω phase, and it shows a minimum when both martensitic andω transformation are suppressed during quenching in metastableβ alloys. The Sn addition to Ti-V binary alloy retards or suppresses athermal and stress-inducedω transformation, thereby decreasing Young’s modulus. Young’s modulus exhibits minimum values of 51 GPa in quenched (Ti-12 pct V)-2 pct Sn and of 57 GPa in cold-rolled (Ti-12 pct V)-6 pct Sn.     

用倒锥形测头测量蜗杆及滚刀齿形的测头半径补偿

根据倒锥形测头中心的轨迹曲线,分析了测量接触点与测头中心的相对位置关系。提出消除由于测头半径所引起的测量误差的原理,并给出了圆弧齿轮滚刀的齿形测量实例。     

Analog Circuit Design Methodology in a Low Power RISC Microprocessor

There are various kinds of analog CMOS circuits in microprocessors. IOs, clock distribution circuits including PLL, memories are the main analog circuits. The circuit techniques to achieve low power dissipation combined with high performance in newest prototype chip in the Super H RISC engines are described. A TLB delay can be decreased by using a CAM with a differential amplifier to generate the match signal. The accelerator circuit also helps to speed up the TLB circuit, enabling single-cycle operation. A fabricated 96-mm² test chip with the super H architecture using 0.35-m four metal CMOS technology is capable of 167-MHz operation at 300 Dhrystone MIPS with 2.0-W power dissipation.     

Enhancement of serotonergic neural activity contributes to cyclosporine-induced tremors in mice

Patients suffering from inflammatory or dysimmunitary diseases may develop various clinical responses to corticotherapy. This brief article describes the various cellular and molecular mechanisms which underly the genetic, endocrine and immunitary factors involved in corticosensitivity, corticoresistance and corticodependence.     

Isolation of dimethyl sulfone-degrading microorganisms and application to odorless degradation of dimethyl sulfoxide

With the objective of developing an odorless biodegradation process for dimethyl sulfoxide (DMSO), Hyphomicrobium sp. WU-OM3 was isolated. During the cultivation of strain WU-OM3 cells with 20 mM dimethyl sulfone (DMSO2) as the sole carbon source, DMSO2 was completely consumed within 48 h and sulfate ion accumulated in the culture broth. Methanesulfonate was also detected as an intermediate of DMSO2 degradation. By combining the DMSO-oxidizing microorganism and strain WU-OM3 cells, 0.64 mM (50 mg/l) DMSO was degraded to sulfate ion with 80% molar conversion ratio.     

Stress-induced martensite formation in Cu−Al−Ni alloys

A study has been made of superelasticity and the strain-memory effect in Cu?Al?Ni alloys in the composition range 14 wt pct Al and 2 to 3 wt pct Ni. These alloys have a bcc structure on quenching and show a low temperature martensitic transformation which is responsible for both the superelastic and strain-memory effects. Tests on both single and polycrystalline specimens showed that the maximum superelasticity occurred close toA _s. At higher temperatures the effect gradually decreased, whilst at lower temperatures it decreased very quickly. The magnitude of the effect was large in single crystal specimens (>5.8 pct), but small in polycrystal specimens (<1.5 pct). The superelastic effect was caused by stress-induced martensite (SIM). Two types of SIM were observed; thin plates of thermoelastic martensite which were always reversible, and wide plates of burst-type martensite. This burst-type martensite was responsible for the major portion of SIM, and whether it was reversible or not on removal of the stress controlled the amount of superelasticity observed. The strain-memory effect occurred on deformation either in the martensitic state (temperature <M _f) or in the temperature range where the martensite once formed was stable (temperature close toM _s). Deformation caused reorientation of the martensite plates and when the specimen was heated, the martensite disappeared and the specimen reverted back to its original shape. This effect was explained on the basis of development of martensite plates of favorable orientation on stressing.     

Evaluation of internal and external doses from 11C produced in the air in high energy proton accelerator tunnels

Air has been irradiated with high energy protons at the 12 GeV proton synchrotron to obtain the following parameters essential for the internal dose evaluation from airborne 11C produced through nuclear spallation reactions: the abundance of gaseous and particulate 11C, chemical forms, and particle size distribution. It was found that more than 98% of 11C is present as gas and the rest is aerosol. The gaseous components were only 11CO and 11CO2, and their proportions were approximately 80% and 20%, respectively. The particulate 11C was found to be sulphate and/or nitrate aerosols having a log-normal size distribution; the measurement using a diffusion battery showed a geometric mean radius of 0.035 micron and a geometric standard deviation of 1.8 at a beam intensity of 6.8 x 10(11) proton.pulse-1 and an irradiation time of 9.6 min. By taking the chemical composition and particle size into account, effective doses both from internal and from external exposures per unit concentration of 11C were calculated for various room sizes. The values can be used to evaluate the effective dose from the airborne 11C produced in the accelerator tunnels.