Kinetics of AuSn4 migration in lead-free solders

The relatively fast diffusion of Au atoms in eutectic PbSn matrix is considered one of the contributing factors to the Au embrittlement problem. In this study, we further investigated the Au embrittlement problem in high-Sn solders. Experimentally, Sn3.5Ag (wt.%) spheres with 500-μm diameter were soldered over the Au/Ni soldering pads. It was found that some of the AuSn₄ needles that formed after reflow inside the solder migrated back to the solder/pad interface during thermal aging. However, the migration kinetics in high-Sn solders was slower compared to that in eutectic PbSn. The difference in migration kinetics of AuSn₄ in eutectic PbSn and SnAg was ascribed to the difference in the magnitudes of the Au flux and the Ni flux. In eutectic PbSn, the Au flux was much greater than that of the Ni flux, and the Au and Ni flux were in the same order of magnitude in eutectic SnAg. The relative magnitude of the Au and Ni flux changed in eutectic PbSn and SnAg because the homologous temperatures of PbSn and SnAg were different.     

Synthesis and characterization of a novel proton‐exchange membrane for fuel cells operating at high temperatures and low humidities

The synthesis of a p‐toluidine/formaldehyde (PTF) resin was performed, and the effects of the molar ratio of the individual monomers and the polymerization conditions on the structure of the PTF resin were studied. Fourier transform infrared and ¹³C‐NMR spectra were used to characterize the PTF. Wide‐angle X‐ray diffraction patterns revealed the crystalline structures of various PTFs. Polarized optical microscopy revealed that the molar ratio of the monomers had a strong effect on the crystalline morphologies. A longer polymerization time turned out a polymer with a higher intrinsic viscosity and molecular weight, which led to differences in the proton conductivity. All of the PTFs showed a higher proton conductivity than a commercial Nafion membrane at 90–100°C and 0% relative humidity. The proton conductivity of the PTF series could be improved by sulfonation with sulfuric acid and could be maintained after blending with polyurethane. Pure methanol could be used as a fuel source because of the insolubility and nonwetting properties of PTF in methanol to increase the output current density for a PTF membrane electrode assembly. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

New approach to enhance adhesions between carbon nanotube emitters and substrate by the combination of electrophoresis and successive electroplating

Complementary electroplating combined with electrophoresis enhanced the field emission characteristics of emitters by improving the adhesions between CNT emitters and substrate. The emitting current of the CNT emitters prepared by our combined method increased nine times higher than that of CNT emitters prepared by electrophoresis only, since electroplating improved the adhesion of CNT emitters. During the life-time measurement for 10 h, the emitting current of CNT emitters fabricated by electrophoresis only was drastically decreased to 13% of the initial current, while that prepared by the combination of electrophoresis and successive electroplating decreased to 64% of the initial current. We suggest that our method is a promising approach for the efficient fabrication of reliable CNT emitters.     

Cross-Border Migration of Hong Kong Residents Under the 'One Country, Two Systems' Policy

Hong Kong is known as a migrant city because its population was sourced from mainland China, and because there has always been outflows of people to overseas countries, especially from the mid-1980s to mid-1990s. Emigration to mainland China has become a significant recent trend. This article discusses this phenomenon in the theoretical contexts of migration and trans-border residential development. It contends that the trend will intensify more quickly than other cross-border movements because the two systems are separated by a political border within one country, and because there are common cultural ties and rapid economic integration.     

Evaluation of recursive queries with extended rules in deductivedatabases

In order to extend the expressive power of deductive databases, a formula that can have existential quantifiers in prenex normal form in a restricted way is defined as an extended rule. With the extended rule, we can easily define a virtual view that requires a division operation of relational algebra to evaluate. The paper addresses a recursive query evaluation where at least one formula in a recursive rule set is of an extended rule. We investigate transformable recursions as well as four cases of non-transformable recursions of transitive-closure-like and linear type. The work reveals that occurrence of an existentially quantified variable in the extended recursive body predicate might dramatically limit the level of recursive search. In particular, the number of iterations to answer extended queries can be determined, independently of database contents     

GaInP/GaAs HBTs for high-speed integrated circuit applications

The use of GaInP/GaAs heterojunction bipolar transistors (HBTs) for integrated circuit applications is demonstrated. The discrete devices fabricated showed excellent DC characteristics with low V_ce offset voltage and very low temperature sensitivity of the current gain. For a non-self-aligned device with a 3-μm×1.4-μm emitter area, f_T was extrapolated to 45 GHz and f_max was extrapolated to 70 GHz. The measured 1/f noise level was 20 dB better than that of AlGaAs HBTs and comparable to that of low-noise silicon bipolar junction transistors, and the noise bump (Lorentzian component) was not observed. The fabricated gain block circuits showed 8.5 dB gain with a 3-dB bandwidth of 12 GHz, and static frequency dividers (divide by 4) were operable up to 8 GHz     

Enhanced extraction of isoflavones from Korean soybean by ultrasonic wave

The amounts of isoflavones extracted from Korean soybean by various ultrasonic waves were compared using 60% aqueous ethanol solution. The effect on extraction yield of variations in solvent composition, temperature, and extraction time was investigated. The experimental results confirmed that ultrasonic waves are a desirable method to extract isoflavones from Korean soybean. The highest yield of aglycone isoflavones was obtained by ultrasonic waves with a frequency of 20 KHz and an extraction time of 10 min, which produced yields of glycoside and aglycone isoflavones three-fold greater than those by dipping method.     

Kinetics of volume expansion during infusion of Ringer’s solution based on two volume model

In this work mathematical models were developed to represent the kinetics of volume changes of fluid spaces associated with infusion of Ringer’s solution. During infusion of Ringer’s solution, the human body is assumed to be characterized by the two-fluid space model which has second volume space in addition to the first volume so that fluid exchanges between these two spaces are possible. Various infusion types were tested to accommodate different medical situations. Volunteers were given Ringer’s solution and the changes in blood hemoglobin were detected. From the comparison with experimental data, the two-fluid space model was found to represent adequately the kinetics of human volume expansion during infusion of Ringer’s solution.     

Influence of Potassium on Preparation and Performance of PTC Resistors

Different amounts of K₂CO₃ were added to (Ba,Sr)TiO₃-based PTCR (positive temperature coefficient of resistance) ceramics to investigate their influence on the microstructural and electrical properties. Experimental results showed that the incorporation of K acted as an A-site acceptor-type dopant. In addition to enhancing discontinuous grain growth, the increase of K₂CO₃ was found to raise the room-temperature resistivity which was dominated by grain-boundary resistance rather than grain resistance. By adjusting to a suitable amount of donor dopant, the inherent contamination of K in raw material can be compensated to achieve a high-quality PTC resistor.