Optimal unit sizing of fuel cell cogeneration systems in consideration of performance degradation

The influence of the life of a cell stack due to performance degradation on a system's economy is investigated in unit sizing of fuel cell cogeneration systems. An optimal unit sizing method proposed by the authors is extended to this case so that it enables the life and performance degradation of the cell stack to be considered. In the method, equipment capacities and maximum contract demands of utilities such as electricity and natural gas are determined so as to minimize the annual total cost leveled for a whole planning period based on the annualized costs method, in consideration of operational strategies which change with performance degradation of the cell stack. Numerical studies are carried out for normally and highly pressurized phosphoric acid fuel cell cogeneration systems installed in two urban areas. Through the studies, it is found that the life of the cell stack greatly influences system' economics and equipment capacities. © 1998 John Wiley & Sons, Ltd.     

Diffusion and sorption for carbon dioxide in Kapton at extremely low pressure

Pressure-dependent solubility and diffusion coefficients for carbon dioxide in glassy polymers have been well described using the “dual sorption and transport model.” However, the plastisization effect by high-pressure carbon dioxide seems to promote the pressure dependence of the sorption and transport coefficients. To avoid the relaxation process by the plastization which is superimposed on the diffusion process, the diffusion and sorption of carbon dioxide were measured at extremely low pressure (below 1 cmHg). Linear isotherms observed for CO₂ sorption into Kapton were interpreted in terms of the dual model equation at extremely low pressure. From the permeation curve of the Kapton/CO₂ system, the diffusion and permeation coefficients were obtained according to the usual manner, and both coefficients were independent of pressure. Sorption and transport parameters were obtained from sorption isotherms and average values of the permeation coefficients. The parameters thus obtained were substituted in an approximated dual sorption and transport equations at extremely low pressure and the pressure independence of the diffusion and permeation coefficients were sufficiently reproduced. It is a good technique to experiment at such extremely low pressure when the validity of the dual model is evaluated. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 69: 1013–1017, 1998     

Intramolecular acyl migration and enzymatic hydrolysis of 2-O-α-D-glucopyranosyl-6-O-(2-pentylheptanoyl)-L-ascorbic acid

2-O-α-D-Glucopyranosyl-6-O-(2-pentylheptanoyl)-L-ascorbic acid (6-bDode-AA-2G) underwent an intramolecular acyl migration to yield approximately 12% of 2-O-α-D-glucopyranosyl-5-O-(2-pentylheptanoyl)-L-ascorbic acid (5-bDode-AA-2G) in neutral solutions for 3 days. In small intestine homogenate from guinea pigs for 12h, 6-bDode-AA-2G, which hardly underwent acyl migration to give 5-bDode-AA-2G, was predominantly hydrolyzed with α-glucosidase and then with esterase to ascorbic acid.     

The effects of EPA and DHA enriched fish oil on nutritional and immunological markers of treatment naïve breast cancer patients: a randomized double-blind controlled trial

Background

We evaluated the effects of eicosapentaenoic (EPA) and docosahexaenoic (DHA) acids enriched fish oil (FO) on nutritional and immunological parameters of treatment naïve breast cancer patients.

Methods

In a randomized double blind controlled trial, the FO group (FG) patients were supplemented with 2 g/ day of FO concentrate containing 1.8 g of n-3 fatty acids during 30 days. The placebo group (PG) received 2 g/ day of mineral oil. At baseline and after the intervention, plasma levels of n-3 fatty acids, dietary intake, weight, body composition, biochemical and immunological markers were assessed.

Results

At the end of the intervention period, no between group differences were observed regarding anthropometric parameters. There was a significant increase in the plasma phospholipid EPA (p = 0.004), DHA (p = 0.007) of the FG patients. In FG patients the percentages of peripheral blood CD4⁺ T lymphocytes and serum high sensitivity C-reactive protein (hsCRP) levels were maintained while in PG patients there was a significant increase in hsCRP (p = 0.024). We also observed a significant reduction in the percentage of CD4⁺ T lymphocytes in the peripheral blood (p = 0.042) of PG patients. No changes in serum proinflammatory cytokine and prostaglandin E₂ levels were observed.

Conclusions

Supplementation of newly diagnosed breast cancer patients with EPA and DHA led to a significant change in the composition of plasma fatty acids, maintained the level of CD4⁺ T cells and serum levels of hsCRP, suggestive of a beneficial effect on the immune system and less active inflammatory response.

Trial registration

Brazilian Clinical Trials Registry (REBEC): RBR-2b2hqh. Registered 29 April 2013, retrospectively registered.

     

Studies on high‐speed melt spinning of noncircular cross‐ section fibers. I. Structural analysis of as‐spun fibers

Flat fibers and hollow fibers were prepared through the high‐speed melt spinning of poly(ethylene terephthalate) (PET), and the structures of these fibers were compared with those of circular fibers. The cross‐sectional shape of each fiber changed to a dull shape in comparison with that of the respective spinning nozzle. The change in the cross‐sectional shape was slightly suppressed with an increase in the take‐up velocity. There was a significant development of structural variation in the cross section of flat fibers in that the molecular orientation and crystallization were enhanced at the edge. Despite the difference in the cross‐sectional shape, the structural development of flat, hollow, and circular fibers with increasing take‐up velocity showed almost similar behavior. Considering that the tensile stress at the solidification point of the spin line is known to govern the structure development of high‐speed spun PET fibers, it was speculated that the effects of the enhancement of cooling and air friction on the tensile stress at the solidification point cancel each other. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1575–1581, 2001     

Effects of Dietary Proteins of Proso, Japanese and Korean Foxtail Millets on Lipid Metabolism and Type-2 Diabetes in Rats and Mice

We examined the effects of dietary Japanese millet protein (JMP) and Korean foxtail millet protein (KFMP) on lipid metabolism and type 2 diabetes in rats and mice. When type 2 diabetic rats were fed with JMP for 20 days, plasma glucose levels lowered, whereas those of HDL-cholesterol and adiponectin rose significantly compared to the control group. Then when type 2 diabetic mice were fed with KFMPfor 20 days,     

Pyrolytically prepared carbon from fluorine-GIC

Formation mechanism, crystallinity, porosity and chemical reactivity were studied on the carbon prepared by pyrolysis of single phase, stage-1 fluorine-graphite intercalation compound (fluorine-GIC; C_xF). The stage-1 C_2.5F directly decomposes to fluorocarbon gases and carbon above 650 K, without forming higher stage compounds. The pyrocarbon prepared from C_2.5F gives hkl diffraction peaks indicating graphite-like stacking order of graphene layers. This carbon possesses average crystallite sizes along the c- and a-axes (L_c and L_a) of about 5 and 50 nm, respectively. The specific surface area of the pyrocarbon (about 40 m² g⁻¹) is only twice as large as that of the original crystalline graphite. Chemical behavior of the pyrocarbon as an intercalation host for sodium and potassium is similar to that of crystalline graphite, but it is easily fluorinated by elemental fluorine even at 573 K to give poly(carbon monofluoride) [(CF)_n] probably due to the small crystallite size and the mesopores formed by formation/decomposition processes of C_2.5F.     

Effective Diffusivity Determination Considering Shrinkage by Means of Explicit Finite Difference Method

Drying data of salted shark (Carcharhinus limbatus) muscle pieces samples, dried in a convective dryer, by using three different air conditions and two different air velocities, were treated by Fick's second law. The shrinkage during drying process was considered as a linear function of sample moisture. The Fick's second law equation was numerically solved by the explicit finite difference method to obtain effective diffusivity, considering shrinkage and with and without simplification of moisture content profile. The experimental data fitted very well independently of the simplification introduced on the moisture content profile. The best fit was obtained by considering volumetric average of sample moisture content. The effective diffusivity values calculated considering the shrinkage varied from 0.72 to 2.20 × 10^?10 m²/s with the mean relative deviation modulus from 1.02 to 6.51%. The activation energy expressed in function of air temperature varied from 3.42 to 19.23 kJ/mol.     

Influence of the interfacial adhesion on the stringiness of crosslinked polyacrylic pressure‐sensitive adhesives

The stringiness of crosslinked polyacrylic pressure‐sensitive adhesives (PSA) was observed during 90° peeling under a constant peel rate with various adherends in order to clarify the influence of interfacial adhesion on the stringiness behavior. The crosslinked random copolymer of butyl acrylate with 5 wt % acrylic acid was used as a representative PSA. Poly(methyl methacrylate) (PMMA), polycarbonate (PC), poly(vinyl chloride) (PVC), fused quartz plates and some surface‐modified poly(ethylene terephthalate) films were used as adherends. The films were pasted on a glass plate using a cyanoacrylate adhesive. The 180° peel strength was higher in the order of PVC >> PMMA ≈ PC > other adherends. All observed stringiness was sawtooth‐shaped, but the stringiness width and length were longer in the same order. The number of sub‐branches formed at the tips of the strings was much more for the PVC, PMMA and PC adherends. Frames formed at the front end of the strings in the case of PVC adherend. Sufficient interfacial adhesion generates large internal deformation of the PSA layer. Internal deformation occurred preferentially over peeling as a result of front frame formation. The string length and the peel load required for the constant peel rate have good correlation with the peel strength. The estimation of generated inner stress in the fibrils of the strings was possible by analysis using the string length for various adherends and the stress–strain curve of pure PSA. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40869.