应用炉膛压力诊断气流床气化炉的火焰状态

气化炉是煤气化技术中的关键设备 .气化炉内火焰燃烧稳定性下降 ,会出现燃烧噪音增加、气化燃烧效率降低及熄火等现象 ,对安全性和经济性产生严重的影响 .对气流床气化炉内不同气化燃烧状态下的火焰压力信号进行了小波分析 .结果表明 ,压力信号在一定频段内的分布与气化炉内火焰燃烧的状态密切相关 ,发现随着火焰燃烧稳定性加强 ,气化炉内压力信号向高频方向移动 ,以此可以建立气流床气化炉燃烧诊断模型 .     

Properties and crystallization kinetics of poly(ether ether ketone)‐co‐poly(ether ether ketone ketone) block copolymers

A series of block copolymers composed of poly(ether ether ketone) (PEEK) and poly(ether ether ketone ketone) (PEEKK) components were prepared from their corresponding oligomers via a nucleophlilic aromatic substitution reaction. Various properties of the copolymers were investigated with differential scanning calorimetry (DSC) and a tensile testing machine. The results show that the copolymers exhibited no phase separation and that the relationship between the glass‐transition temperature (T_g) and the compositions of the copolymers approximately followed the formula T_g = T_g1X₁ + T_g2X₂, where T_g1 and T_g2 are the glass‐transition‐temperature values of PEEK and PEEKK, respectively, and X₁ and X₂ are the corresponding molar fractions of the PEEK and PEEKK segments in the copolymers, respectively. These copolymers showed good tensile properties. The crystallization kinetics of the copolymers were studied. The Avrami equation was used to describe the isothermal crystallization process. The nonisothermal crystallization was described by modified Avrami analysis by Jeziorny and by a combination of the Avrami and Ozawa equations. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1652–1658, 2005     

A hybrid recommendation algorithm adapted in e-learning environments

With the rapid development of online learning technology, a huge amount of e-learning materials have been generated which are highly heterogeneous and in various media formats. Besides, e-learning environments are highly dynamic with the ever increasing number of learning resources that are naturally distributed over the network. On the other hand, in the online learning scenario, it is very difficult for users without sufficient background knowledge to choose suitable resources for their learning. In this paper, a hybrid recommender system is proposed to recommend learning items in users’ learning processes. The proposed method consists of two steps: (1) discovering content-related item sets using item-based collaborative filtering (CF), and (2) applying the item sets to sequential pattern mining (SPM) algorithm to filter items according to common learning sequences. The two approaches are combined to recommend potentially useful learning items to guide users in their current learning processes. We also apply the proposed approach to a peer-to-peer learning environment for resource pre-fetching where a central directory of learning items is not available. Experiments are conducted in a centralized and a P2P online learning systems for the evaluation of the proposed method and the results show good performance of it.     

The effect of sputter etching on the surface characteristics of dyed aramid fabrics

Three kinds of aramid fabrics, Technora (modified p-aramid), Conex (m-aramid) and Kevlar (p-aramid), were subjected to sputter etching and argon low-temperature plasma treatments after dyeing in black with disperse dyes. The depth of shade increased considerably on Technora and Kevlar with the sputter etching treatment, but not on Conex fabrics. Argon low-temperature plasma treatment had virtually no effect on the depth of shade on the aramid fabrics.     

Synthesis of superabsorbent resin by ultraviolet photopolymerization

Synthesis of superabsorbent resin (SAR) was achieved by a new method, that of direct UV photopolymerization, and in particular the synthesis of a SAR of acrylic acid–potassium acrylate copolymer by UV photopolymerization was investigated. Influences of ratio (mol) of acrylate monomer to acrylic acid monomer, photoinitiators, crosslinking agents, and exposure time of UV light on the water‐absorbent properties were investigated. The results showed that the water absorbency (Q) of SAR based on Irgacure 1700 or Irgacure 1800 was 545–530 mL/g, but under the same conditions Q was 450 mL/g for the SAR based on Irgacure 651. N,N′‐Methylene bisacrylamide, hydroethyl acrylate, and glycerol were used as crosslinking agents, of which N,N′‐methylene bisacrylamide was the most effective. It crosslinked the molecular chains through attending the copolymerization with acrylic acid (AA) and potassium acrylate. When the exposure time was 5 min, the value of Q was 1368 mL/g (the content of N,N′‐methylene bisacrylamide was 100 ppm). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1618–1624, 2004     

裂解汽油加氢装置二段反应器缺陷分析

对中国石油吉林石化公司300 kt/a乙烯装置汽油加氢二段反应器接管与筒体焊接接头的缺陷进行详细分析。阐明了缺陷的产生是由于在焊接过程中焊缝熔合区内形成马氏体、增碳层并伴有δ-铁素体的分解而使熔合区内及焊缝处的材质脆化。由于选用焊接材料的错误,产生较高的焊接残余应力致使焊缝开裂。分析了焊缝马氏体、增碳层及δ-铁素体分解的原因。     

Surface and interfacial FTIR spectroscopic studies of latexes. IX. The effect of homopolymer and copolymer structures on surfactant mobility in Sty/BA latices

The effects of homopolymer and copolymer compositions and structures in styrene/n-butyl acrylate (Sty/BA) latices on sodium dioctyl sulfosuccinate (SDOSS) surfactant mobility and its preferential concentration at the film–air (F–A) and film–substrate (F–S) interfaces were examined using attenuated total reflectance Fourier transform infrared (ATR FTIR) spectroscopy. It appears that the SDOSS concentration at the F–S interface is highest when the Sty/BA feed ratio is 50/50, and the excess of Sty results in migration of SDOSS surfactant to the F–A interface. This behavior is attributed to the increased glass transition temperature and diminished compatibility between surfactant molecules and copolymer latex. This study also shows that the primary factors that influence exudation to either F–A or F–S interfaces are surface tension of the substrate, glass transition temperature, water flux during coalescence, and compatibility between latex components. © 1995 John Wiley & Sons, Inc.     

Formation of novel polymeric nanoparticles

We have found that not only block copolymers but also ionomers can self-assemble in a selective solvent to form surfactant-free nanoparticles. The self-assembly can be induced by chemical reaction, polymer-polymer complexation, and microphase inversion in addition to the temperature. A recently developed microwave method for the preparation of uniform surfactant-free polymeric nanoparticles is also reviewed. Our results have revealed that for a given dispersion, the particle surface area occupied per stabilizer (surfactant, polymer chains, and ionic groups) is close to a constant.     

Synthesis and characterization of soluble aromatic azopolyamides containing sulfone and ether units

A series of new polyamides 3a–d containing aryl-azo, ether and sulfone groups in the main chain were synthesized from bis[4-(4-aminophenoxy)phenyl sulfone] 1 and several azo aromatic diacyl chlorides 2a–d by the low temperature solution polycondensation technique. FTIR spectroscopy, nuclear magnetic resonance (NMR) and elemental analyses confirmed the structure of these polymers. Owing to the aryl and amide groups in the main chain, these polymers exhibit photochromic properties as well as excellent thermal stabilities. The transition temperatures (T _g) are between 242 and 265 °C, and the char yields at 800 °C in nitrogen atmosphere were above 39%. Based on incorporation of flexible ether linkages and polar sulfone groups, the polyamides show desirable solubility in organic solvents such as DMAc, N,N-dimethylformamide (DMF), N-methyl-2-pyrroidinone (NMP) and dimethylsulfoxide (DMSO). And it is exemplified that polyamide containing 2 and 2′ substitutes performed better solubility. Funded by the National Natural Science Foundation of China (No. 50572081)