Gravity driven counterflow through an open door in a sealed room

Flow measurements using tracer gas techniques were made on the exterior doorway of a test house for indoor-outdoor temperature differences of 0.5–45 K. The time for door opening and closing was constant at 3.75 s, and fully open hold time varied from 0.5 s to 120 s. Predictions of a variable density steady flow model were in good agreement with the measurements when adjustments were made for the time-varying size of the opening and for the effect of cross-stream mixing between the incoming and outgoing air streams. The flow rate is shown to be governed by an effective density very close to the average of inflow and outflow densities, and the control condition at the doorway is fixed by the jet-like behavior of the inflow stream. Dependence of cross-stream mixing on interfacial stability caused the orifice and coefficient to increase from 0.4 to 0.6 as temperature difference increased. This varying orifice coefficient is well represented by the combination of a discharge coefficient for streamline contraction combined with a mixing coefficient which accounts for mixing between the inflow and outflow.     

Resources and reserves of European gravel deposits

Contrary to public opinion, gravel and sand are mineral raw materials that are not available in unlimited quantities, and, at any place. In quantity and economic value they belong to the top-ranking resources on a world scale. Supplies are not unlimited: lifetime is very short in some regions. Being very vulnerable to changes in transport costs and sensitive with respect to conflicts between environmental protection and mining, sand and gravel require scientific effort in order that new deposits be found and the lifetime of reserves increased.     

Lead contamination in tap water of households with children in Lower Saxony, Germany

Lead has numerous acute and chronic adverse effects on human beings. This is especially true for infants and children. The main path of lead ingestion in children can be different according to housing and living situation. The intake of lead through drinking water is commonly due to metal corrosion. The users plumbing can be an important factor. In recent years, many lead pipes in Germany have been replaced by pipes made of an alternative material. The aim of this study is to assess the present state of drinking water contamination and the resulting exposure of infants to lead. For this purpose mothers of new-born babies were offered a free examination of their drinking water. After a written declaration of consent had been obtained and after the infant in question had reached an age of 3 months, a stagnation sample of cold tap-water after overnight stagnation together with a random daytime sample was obtained from the family. The collected samples were analysed by atomic absorption spectrometry for their lead concentration. In total, 1485 samples from households were collected. Of the 1434 stagnation samples, 3.1% had lead concentrations greater than 0.01 mg/l (recommended limit of the WHO) and 0.6% had concentrations above the limit of the German drinking water regulation (0.04 mg/l). The values for the 1474 random daytime samples were 2.1% above 0.01 mg/l and 0.2% greater than 0.04 mg/l, respectively. By region, the areas Bovenden, Friedland, Duderstadt, Northeim and Rosdorf were particularly affected. The highest measured concentrations of lead in the stagnation samples were 0.11 mg/l and 0.15 mg/l in the random daytime samples, respectively.     

An experimental behaviour of concrete-filled steel tubular columns

In this paper results of tests conducted on 27 concrete-filled steel tubular columns are reported. The test parameters were the column slenderness, the load eccentricity covering axially and eccentrically loaded columns with single or double curvature bending and the compressive strength of the concrete core. The test results demonstrate the influence of these parameters on the strength and behaviour of concrete-filled steel tubular columns. A comparison of experimental failure loads with the predicted failure loads in accordance with the method described in Eurocode 4 Part 1.1 showed good agreement for axially and eccentrically loaded columns with single curvature bending whereas for columns with double curvature bending the Eurocode loads were higher and on the unsafe side. More tests are needed for the case of double curvature bending.     

Chlorine disappearance in sea-water

A series of chlorination studies were carried out on natural and artificial sea-water. It was determined that both the forward and back titration procedures accurately described the two phases of chlorine losses in sea-water: a rapid initial loss followed by a continuous loss at a sharply reduced rate. The order of adding the iodide and buffer reagents was found to be crucial in affecting the rapid initial loss. The initial loss was found to reach a saturation level that varied widely between natural sea-water samples and appeared to be related to a true organic demand. In contrast, the second phase was difficult to explain. Losses continued over 10 day periods and were pronounced in both natural and artificial sea-water containing bromide. In the absence of bromide, long term losses in artificial sea-water were greatly reduced, indicating that the lost applied chlorine was associated with the bromine chemical system in sea-water. The fate of the lost chlorine was not determined and the untitratable halogen compounds must remain suspect as potential biocides.