The effect of the third invariant on the strength and failure of boron carbide and silicon carbide

This article presents new test data to assess the effect the third invariant has on the strength and failure of two ceramic materials: boron carbide and silicon carbide. Two experimental techniques are used: the Brazilian test that produces a biaxial state of stress, and a new technique that uses a high-pressure confinement vessel to load a specially designed dumbbell specimen in triaxial extension. The dumbbell geometry provides two important advantages over the typically used cylindrical specimen: no adhesive is required to bond the specimen to the load cell because the dumbbell geometry naturally takes the specimen into tension, and any loading asymmetries are essentially eliminated due to the axisymmetric geometry. The results show that when the stress state is on the tensile meridian the equivalent stress at failure is constant, independent of the hydrostatic pressure. The average equivalent stress at failure is for boron carbide and for silicon carbide. The Brazilian test was only performed on boron carbide and failed at , much higher than when on the tensile meridian () indicating that the effect of the third invariant is significant (because of the difference in the failure strength) and must be accounted for to accurately predict when failure will occur.     

Fate of Calcium Chloride Dissolved in Concrete Mix Water

The extent to which chloride ion incorporated in portland cement concrete as calcium chloride accelerator at the usual treatment levels remains dissolved in the pore solution was investigated. This was examined by direct analysis of pore solutions expressed from cement pastes. The chloride ion concentration of the pore solution remains high during the first day of hydration and only gradually declines. It appears that appreciable concentrations of chloride ion likely remain in solution indefinitely .     

How a cockpit calculates its speeds and why errors while doing this are so hard to detect

Recent incidents have shown that the production of take-off speeds is an activity vulnerable to miscalculations with a potential for disastrous outcomes. The aim of this paper is to analyze the calculation of the take-off speeds in a modern airline cockpit as a distributed cognitive activity in order to identify possible vulnerabilities in this process. We took the cockpit as the joint cognitive system under analysis and conducted an ethnographic study based on documental analysis, flight observations, interviews, and the analysis of 22 events involving failures related to the calculation of take-off speeds. The main argument is that the cognitive systems engineering perspective, with less focus on the human contribution than it is common in investigations, levels people and artifacts in the system as equal contributors to its eventual performance. Our analysis identified four assertions regarding vulnerabilities in the process of take-off speeds calculation: (1) representations at the level of the cockpit are always partial and incomplete; (2) some interactions require interpretation rather than institution; (3) interactions of agents do not follow a canonical process of coordination; (4) the control of the prevention of failures is accurate but inadequate. These vulnerabilities are a matter of interactions among cognitive systems in the cockpit, rather than vulnerabilities of individual agents, such as humans or artifacts.     

Laser‐irradiated zinc oxide thin‐film transistors fabricated by solution processing

Abstract— This study investigates the effects of subjecting zinc oxide (ZnO) thin films to laser irradiation. The optical, structural, and electrical properties of the as‐deposited and laser‐irradiated films at different laser energies were studied. The transmittances without/with laser irradiation showed a net increase from 85 to 92% (@550 nm) for 250‐nm ZnO films, indicating an improvement in sample crystal linity. In addition, laser treatment decreased the ZnO band gap. Composition structure analysis shows that the crystallinity increased when the laser energy increased. Thin‐film transistors (TFTs) with a ZnO active layer were fabricated. The mobility of as‐deposited ZnO TFT devices (0.19 cm²/V‐sec) increased more than 2.5 times for ZnO of unirradiated laser treatment (0.49 cm²/V‐sec).     

Stress transmission through three-dimensional granular crystals with stacking faults

We explore the effect of stacking fault defects on the transmission of forces in three-dimensional face-centered-cubic granular crystals. An external force is applied to a small area at the top surface of a crystalline packing of granular beads containing one or two stacking faults at various depths. The response forces at the bottom surface are measured and found to correspond to predictions based on vector force balance within the geometry of the defects. We identify the elementary stacking fault as a boundary between two pure face-centered-cubic crystals with different stacking orders. Other stacking faults produce response force patterns that can be viewed as resulting from repetitions of this basic defect. As the number of stacking faults increases, the intensity pattern evolves toward that of an hexagonal-close-packed crystal. This leads to the conclusion that the force pattern of that crystal structure can be viewed as the extreme limit of a face-centered-cubic crystal with a stacking fault at every layer.This work was supported by NSF-CTS 0090490 and by the NSF MRSEC Program under DMR-0213745. MJS acknowledges support by the University of Chicago MRSEC Summer 2002 REU program.     

A note on productivity gains in flexible robotic cells

Flexible robotic cells combine the capabilities of robotic flow shops with those of flexible manufacturing systems. In an m-machine flexible cell, each part visits each machine in the same order. However, the m operations can be performed in any order, and each machine can be configured to perform any operation. We derive the maximum percentage increase in throughput that can be achieved by changing the assignment of operations to machines and then keeping that assignment constant throughout a lot's processing. We find that no increase can be gained in two-machine cells, and that the gain in three- and four-machine cells each is at most 14 %.     

New test method to evaluate the impact behaviour of biaxially confined concrete

A new experimental technique for imposing uniaxial or biaxial confinement on specimens subjected to dynamic load has been developed. A drop weight impact machine was used to “split” the confined specimens. Different levels of pre-stress were chosen to evaluate the change in the impact behaviour due to the confinement. The results showed that the variations in the impact energy and in the maximum impact load due to the confinement were small. To quantify the damage of the impacted specimens, a splitting tension test was performed on the already impacted specimens under quasi-static loading conditions. The values of the residual splitting tensile strength showed that the damage depends on the level of confinement. The use of such a testing method may lead to a better understanding of the impact behaviour of cementitious materials.     

Social Crisis.

I am bewildered at the fact that the pages of the American Psychologist reflect almost no awareness of the tragic social upheaval which is accompanying the efforts of the American Negro to win his political, economic, and no less important, his psychological integration with the remainder of American society. This crisis will not disappear because we ignore it. It will be resolved one way or another. The Negro has apparently turned his face from acceptance of his unhappy circumstances and is determined to fight for his human and Constitutional rights. I think it is time that we, as a profession, give recognition to what is occurring around us, that we discuss what our role can and should be, and that each of us, in our own communities volunteer our services and our knowledge to work towards a just and peaceful integration of the American Negro into the American society of the twentieth century. (PsycINFO Database Record (c) 2010 APA, all rights reserved)