Visible photoluminescence from Ge nanoclusters implanted in nanoporous aluminum oxide films

Nanoporous aluminum oxide (Al₂O₃) films with uniform porous size of 45 nm prepared by the electrochemical process in inorganic acid medium were implanted at room temperature (RT) with 120 keV Ge⁺ ions with a fluence of 1.2×10¹⁶ cm⁻². The nucleation and growths of Ge nanoparticles, were obtained by thermal annealing of the implanted samples at the temperature range of 200-600 °C. The size and distribution of the nanoparticles were characterized by photoluminescence (PL) measurements. The photoluminescence measurements as a function of the annealing temperature shows that at low annealing temperature (200 °C), the sample presents a low intensity and broad emission band centered at 5456 Å consistent with emission band characteristics of nanocluster of Ge with diameter in the range of 4-8 nm, as the annealing temperature increases to 400 °C the PL intensity increases by a factor of almost 20 and the emission band suffers a small red shift. The intensity increases can be related to the increase of the number of Ge nanocluster. At the annealing temperature of 600 °C, the emission band is considerably red shifted by almost 172 Å and the emission intensity decreases significantly, strongly suggesting that nanocrystalline Ge having a character of direct optical transitions exhibits the visible photoluminescence.     

Automatic adjustment of a medical imaging data acquisition system to unknown delays in the input communication channels

In this article, novel FIFO and RAM-based Synchronization Modules to keep synchronism throughout the input channels of a Data Acquisition Electronics (DAE) system are proposed. DAE is a main component of a Medical Imaging System, namely, a Positron Emission Mammography (PEM) system. DAE input data comes from a scanner constituted by an array of scintillating crystals. The scanner captures radiation generated by human cells injected with a radioactive substance and converts it into electrical signals. The corresponding digital information is sent to the DAE. In order to deal with the huge amount of data, flowing at high data rates, point-to-point (p2p) communication channels are used between the scanner and the DAE. Propagation delays associated with the different communication channels may change differently. Additionally, differences among channel delays may exceed one clock period. Keeping synchronism in these circumstances requires more than the classical asynchronous FIFO solution. All these aspects motivate the work proposed in this article. The PEM DAE system is a multi-board, multi-FPGA, multi-clock domain system. Therefore, the DAE architecture follows a Globally Asynchronous, Locally Synchronous (GALS) design style. The novel Synchronization Modules proposed in this article are implemented in the DAE. The effectiveness of these new structures is validated through simulation and laboratorial test. Simulation and test results are presented.     

Liquid Metal Based Island‐Bridge Architectures for All Printed Stretchable Electrochemical Devices

The adoption of epidermal electronics into everyday life requires new design and fabrication paradigms, transitioning away from traditional rigid, bulky electronics towards soft devices that adapt with high intimacy to the human body. Here, a new strategy is reported for fabricating achieving highly stretchable “island‐bridge” (IB) electrochemical devices based on thick‐film printing process involving merging the deterministic IB architecture with stress‐enduring composite silver (Ag) inks based on eutectic gallium‐indium particles (EGaInPs) as dynamic electrical anchors within the inside the percolated network. The fabrication of free‐standing soft Ag‐EGaInPs‐based serpentine “bridges” enables the printed microstructures to maintain mechanical and electrical properties under an extreme (≈800%) strain. Coupling these highly stretchable “bridges” with rigid multifunctional “island” electrodes allows the realization of electrochemical devices that can sustain high mechanical deformation while displaying an extremely attractive and stable electrochemical performance. The advantages and practical utility of the new printed Ag‐liquid metal‐based island‐bridge designs are discussed and illustrated using a wearable biofuel cell. Such new scalable and tunable fabrication strategy will allow to incorporate a wide range of materials into a single device towards a wide range of applications in wearable electronics.     

In vivo measurement of the brain and skull resistivities using an EIT-based method and realistic models for the head

In vivo measurements of equivalent resistivities of skull (rho(skull)) and brain (rho(brain)) are performed for six subjects using an electric impedance tomography (EIT)-based method and realistic models for the head. The classical boundary element method (BEM) formulation for EIT is very time consuming. However, the application of the Sherman-Morrison formula reduces the computation time by a factor of 5. Using an optimal point distribution in the BEM model to optimize its accuracy, decreasing systematic errors of numerical origin, is important because cost functions are shallow. Results demonstrate that rho(skull)/rho(brain) is more likely to be within 20 and 50 rather than equal to the commonly accepted value of 80. The variation in rho(brain)(average = 301 omega x cm, SD = 13%) and rho(skull)(average = 12230 omega x cm, SD = 18%) is decreased by half, when compared with the results using the sphere model, showing that the correction for geometry errors is essential to obtain realistic estimations. However, a factor of 2.4 may still exist between values of rho(skull)/rho(brain) corresponding to different subjects. Earlier results show the necessity of calibrating rho(brain) and rho(skull) by measuring them in vivo for each subject, in order to decrease errors associated with the electroencephalogram inverse problem. We show that the proposed method is suited to this goal.     

Dispersion characteristics of asymmetric coupled anisotropic dielectric waveguides using FDFD

The formulation is developed in the frequency domain and the finite difference method is used for the numerical solution of the scalar wave equation, written in terms of the transverse components of the magnetic field. As a result a conventional eigenvalue problem is obtained without the presence of spurious modes due to the implicit inclusion of the divergence of the magnetic field equal to zero. The formulation is developed to include biaxial anisotropic dielectrics with an index profile varying arbitrarily in the cross section of the waveguide under analysis. This formulation is then applied to the analysis of the influence on the dispersion characteristics of the dimensions of asymmetric coupled rectangular uniaxial anisotropic dielectric waveguides. As expected, the reduction of the height or the width of one of the rectangular dielectric waveguides causes the dispersion curves to move towards higher frequencies.     

D2D pervasive communication system with out-of-band control autonomous to 5G networks

Wireless Networks - D2D (device-to-device) communication is one of the developments of 5G networks (5th generation mobile networks) that reduce mobile traffic load, reduce energy consumption and...     

Virtual RF system platform dedicated to heterogeneous complex SoC design

In this paper, we propose to develop a hierarchical library associated with various simulators that can be used in a single platform, called TrustMe-ViP, which enables a unique simulation framework and full model interoperability. Such platform is dedicated to complex SoC design, such as trusted personal devices where cost and time-to-market are very important constraints. To validate this methodology, we present the estimation of BER and power consumption for a Bluetooth transceiver.     

Dispersion in finlines on semiconductor and the S-parameters of a step discontinuity

The Transverse Transmission Line method is used for the characterization of bilateral and unilateral finlines on a semiconductor substrate and in conjunction with the modal method, for the calculation of the scattering parameters due to a step discontinuity on a unilateral finline with a lossless dielectric substrate. Numerical results of the effective dielectric constant, attenuation constant and characteristic impedance for the bilateral and unilateral finlines on semiconductor substrates, and results of scattering parameters of a step discontinuity for unilateral finline, are presented.     

Effects of time of grape pomace fermentation and distillation cuts on the chemical composition of grape marcs

 The effects of fermentation time and distillation cuts on the composition of distillates in terms of ethanal, 1,1-diethoxyethane, methanol, 1-butanol, 2-butanol, 1-propanol, 2-methyl-1-propanol, 2-methyl-1-butanol, 3-methyl-1-butanol, ethyl acetate, ethyl 2-hydroxypropanoate, 3-methylbutyl acetate, hexyl acetate, 2-phenylethyl acetate, hexanol, trans-2-hexenol, trans-3-hexenol, cis-3-hexenol, 2-phenylethanol, ethyl butyrate, ethyl hexanoate, ethyl octanoate, ethyl decanoate, ethyl dodecanoate, 2-methylpropanoic acid, 3-methylbutanoic acid, hexanoic acid, octanoic acid, decanoic acid, and dodecanoic acid were assessed through data generated according to a factorial design using analysis of variance and principal component analysis. Four times of storage of pomace obtained following winemaking of two grape varieties of white Verde wine (Alvarinho and Loureiro) and three distillation cuts were considered; volatile compounds in the 24 samples generated were analyzed directly, and indirectly after extraction and concentration, by capillary gas chromatography. The results generated have suggested clear differences (P<0.05) between distillate cuts obtained throughout fermentation times for each grape variety. The major differences between the different distillate fractions analyzed were accounted for by the contents of diethyl butanoate, ethyl 2-hydroxypropanoate, and the sum of 3-methylbutanoic and 2-methylpropanoic acids for Loureiro, whereas the main differences were accounted for by the contents of diethyl butanoate and the sum of the carboxylic acids for Alvarinho.