Occurrence and behaviour of linear alkylbenzenesulphonates, nonylphenol, nonylphenol mono- and nonylphenol diethoxylates in sewage and sewage sludge treatment

The fluxes of linear alkylbenzenesulphonates (LAS), nonylphenol (NP), nonylphenol monoethoxylate (NP1EO) and nonylphenol diethoxylate (NP2EO) through sewage and sludge treatment of 29 Swiss sewage treatment plants were investigated. Reversed-phase high-performance liquid chromatography (HPLC) was used to determine LAS. Normal-phase HPLC was employed to measure NP, NP1EO and NP2EO which are metabolites of the nonionic surfactants of the nonylphenol polyethoxylate type (NPnEO). Quantitative determinations were performed of raw sewage, primary and secondary effluents and of sewage sludge. Under normal conditions of sewage and sludge treatment, LAS were efficiently removed from the raw wastewater (> 99% w/w) and were partly transferred to the sewage sludge (15–20% w/w). About 50% (molar base) of NPnEO in the sewage were transformed to NP and accumulated in the digested sludge. Large variations existed among different sewage treatment plants. It was estimated that 1.0 g m⁻² y⁻¹ of LAS and 0.3 g m⁻² y⁻¹ of NP are applied with sewage sludge to Swiss soils.     

Assessing Changes in Enriched Maize Flour Formulations After Extrusion by Means of FTIR,XRD, and Chemometric Analysis

Spectral analysis employing multivariate techniques was employed to differentiate plain maize flours from formulations containing maize with added milled chia or quinoa seeds for producing cereal breakfast extrudates. The physicochemical changes of the enriched formulations due to processing stages and formulation were evaluated by using FTIR and chemometric analysis, which allowed a rapid and non-destructive discrimination between sample processing and compositional aspects. Specific IR frequencies were selected which provided highest sample discrimination. Selected IR absorbance relationships at those specific wavenumbers were useful to track changes promoted by extrusion for carbohydrates, proteins, and lipids. The complexes between amylose and lipids, that takes place during extrusion, underwent distinctive changes as confirmed by XRD. The crystallinity loss, after extrusion (with an average value of 50%), shows evidence of amylose-lipid complexes formation of type E_h and V_h. Correlations between the textural behavior, composition, and selected FTIR indices were obtained.     

An iron-based T 1 contrast agent made of iron-phosphate complexes: In vitro and in vivo studies

A new iron-based T ₁ contrast agent consisting of a complex of iron ions coordinated to phosphate and amine ligands (Fe_(phos) in short) has been characterized by spectroscopic and magnetic measurements. NMR relaxation studies showed r ₁ values to be dependent on the phosphate salt concentration, K₂HPO₄, present in the medium. r ₁ reaches a maximum value of 2.5 mM^?1 s^?1 for measurements carried out at 7 T and 298 K. ³¹P MRS, Mössbauer spectroscopy and magnetic measurements of Fe_(phos) solutions suggest paramagnetic Fe³⁺ ions present in the studied iron–phosphate complex. In vitro and in vivo toxicity experiments with C6 cells and CD1 mice, respectively, demonstrated lack of toxicity for Fe_(phos) at the highest dose tested in the MRI experiments (12 mM iron for C6 cells and 0.32 mmol iron/kg for mice). Finally, T ₁ weighted images of brain tumours in mice have shown positive contrast enhancement of Fe_(phos) for tumour afflicted regions in the brain.     

Rißbreitennachweis für Kreisquerschnitte

Verification of Crack Limitation for Circular Cross Section The verification of the crack limitation for circular cross sections such as bored piles is often neglected. In some cases for instance for predominantly bending members the crack limitation is the fundamental proof. Thus all necessary principals for the crack limitation of circular cross sections were provided. The analytical approaches are proved by experiments. There is a good conformance between the theoretical approach provided and the tests.     

Synthesis and Polymerization of Epoxy Methacrylates, 2. Acylated Epoxy Methacrylates and their Copolymers

Partially (20–75%) acylated isopropylidene‐bis[1,4‐phenyleneoxy(2‐hydroxytrimethylene)] dimethacrylate (BisGMA) was prepared by a single step reaction of 2,2‐bis[4‐(2,3‐epoxypropoxy)phenyl]propane (DGEBA) with methacrylic acid (MAA), methacrylic anhydride (MAAn) and/or acetic anhydride catalyzed by 0.8 mol‐% N‐methylimidazole at 90–100°C. In any case, MAA was substituted by an equimolar quantity of the anhydride. The reaction kinetics of DGEBA with MAA and MAAn follows a first order law up to a conversion of epoxy groups corresponding to the initial molar ratio of MAAn. For different mole fractions x_MAA, the reaction rate was found to be directly proportional to x^0.5_MAA. The viscosity of BisGMA decreased with an increase in the acylation degree. Acylated BisGMA was copolymerized with triethylene glycol dimethacrylate (TEGMA) by use of a redox initiator system at room temperature and with vinyltoluene (VT) initiated by di‐tert‐butyl peroxide at 150–200°C, respectively, both in the presence of 70–76 wt.‐% of quartz filler. Different dependencies of the content of sol and the conversion of C=C double bonds were observed for thermally polymerized composites from VT with acetylated and methacrylated BisGMA, respectively. Methacrylated BisGMA yielded composites with reduced water uptake. The higher network density of the polymer matrix with methacrylated BisGMA resulted in a higher glass transition temperature T_g and a higher storage modulus of the composites. The initial temperature of weight loss of composites with VT was increased from 230°C for composites with BisGMA up to 258°C for composites with BisGMA methacrylated to a degree of 40%.     

Volume-Independent Sodium Toxicity in Peritoneal Dialysis: New Insights from Bench to Bed

Sodium overload is common in end-stage kidney disease (ESKD) and is associated with increased cardiovascular mortality that is traditionally considered a result of extracellular volume expansion. Recently, sodium storage was detected by Na23 magnetic resonance imaging in the interstitial tissue of the skin and other tissues. This amount of sodium is osmotically active, regulated by immune cells and the lymphatic system, escapes renal control, and, more importantly, is associated with salt-sensitive hypertension. In chronic kidney disease, the interstitial sodium storage increases as the glomerular filtration rate declines and is related to cardiovascular damage, regardless of the fluid overload. This sodium accumulation in the interstitial tissues becomes more significant in ESKD, especially in older and African American patients. The possible negative effects of interstitial sodium are still under study, though a higher sodium intake might induce abnormal structural and functional changes in the peritoneal wall. Interestingly, sodium stored in the interstial tissue is not unmodifiable, since it is removable by dialysis. Nevertheless, the sodium removal by peritoneal dialysis (PD) remains challenging, and new PD solutions are desirable. In this narrative review, we carried out an update on the pathophysiological mechanisms of volume-independent sodium toxicity and possible future strategies to improve sodium removal by PD.     

Aroyl-pyrrolyl hydroxyamides: influence of pyrrole C4-phenylacetyl substitution on histone deacetylase inhibition

The novel aroyl-pyrrolyl hydroxyamides 4 a-a' are analogues of the lead compound 3-(1-methyl-4-phenylacetyl-1H-pyrrol-2-yl)-N-hydroxy-2-propenamide (2) and are active as HDAC inhibitors. The benzene ring of 2 was substituted with a wide range of electron-donating and electron-withdrawing groups, and the effect was evaluated on three HDACs from maize, namely HD2, HD1-B (a class I HDAC), and HD1-A (a class II HDAC). Inhibition studies show that the benzene 3' and, to a lesser extent, 4' positions of 2 were the most suitable for the introduction of substituents, with the 3'-chloro (in 4 b) and the 3'-methyl (in 4 k) derivatives being the most potent compounds, reaching the same activity as SAHA. Inhibition data for 4 b,k against mouse HDAC1 were consistent with those observed in the maize enzyme. The substituent insertion on the benzene ring of 2 (compounds 4 a-a') abated the slight (3-fold) selectivity for class II HDACs displayed by 2. Compound 4 b showed interesting, dose-dependent antiproliferative and cytodifferentiation properties against human acute promyelocytic leukemia HL-60 cells.     

Microscopic and spectroscopic characterization of paintbrush-like single-walled carbon nanotubes

Understanding and controlling the chemical reactivity of carbon nanotubes (CNTs) is a fundamental requisite to prepare novel nanoscopic structures with practical uses in materials applications. Here, we present a comprehensive microscopic and spectroscopic characterization of carbon nanotubes which have been chemically modified. Specifically, scanning tunneling microscopy (STM) investigations of short-oxidized single-walled carbon nanotubes (SWNTs) functionalized with aliphatic chains via amide reaction reveal the presence of bright lumps both on the sidewalls and at the tips. The functionalization pattern is consistent with the oxidation reaction which mainly occurs at the nanotube tips. Thermogravimetric analysis (TGA), steady-state electronic absorption (UV-vis-NIR), and Raman spectroscopic studies confirm the STM observations.