Comparison of single and joint effects of Zn and Cu in continuous flow and batch reactors

BACKGROUND: Microbial behavior in batch reactors may be different from that in continuous flow reactors, which is expected to affect microbial response to heavy metal exposure. Four parallel continuous flow reactors and batch growth tests were used to investigate the single and joint toxicity of Zn and Cu to Artrobacter sp. JM018. RESULTS: The results indicated that Cu is more toxic than Zn under all conditions. In the batch reactors, all Zn concentrations showed a stimulatory effect on microbial growth. However in the continuous system, 125 µmol L^?1 Zn exposure produced inhibition. In the case of mixed Zn and Cu exposures in the batch system, the presence of Zn reduced the severity of Cu inhibition, with a net impact of reduced growth in all cases, whereas in the continuous system microbial growth and substrate utilization rates sharply decreased and ceased. CONCLUSION: The results clearly showed that growth in batch reactors underestimated significantly the heavy metal inhibition, compared with the continuous system. Therefore, the results of batch reactor tests should not be used directly when heavy metal inhibition is to be interpreted for continuous flow systems. Copyright © 2011 Society of Chemical Industry     

The analytic network process for managing inter-enterprise collaboration: A case study in a collaborative enterprise network

In the last years, collaboration among enterprises has gained attention in the business environment as a means to remain competitive. Enterprises that are collaborating look for improving their performance but, in real assessments, they often do not establish efficient frameworks to structure and manage the enterprise association/inter-enterprise performance. In addition, there are many factors that act as barriers to effective collaboration and have to be also properly managed as they impact on the inter-enterprise performance. This paper provides a methodology based on the analytic network process (ANP) to identify and measure, under an integrated approach, both factors and inter-enterprise performance considering their reciprocal impact. With this innovative approach, enterprises will obtain significant information for the decision-making process regarding which are the factors and inter-enterprise performance elements that generate a higher impact and therefore have a high priority within the specific collaborative relationship. Thus, enterprises can focus their efforts on improving those most important factors and performance elements, and consequently, enhancing their competitiveness.     

Hydroxyl‐functional polyurethanes and polyesters: synthesis,properties and potential biomedical application

This mini review gives an overview of the synthesis of polyurethanes and polyesters with pendant hydroxyl groups performed mainly in our group. Significant for the synthesis of most of these polymers with hydroxyl‐functional side groups is that no protection groups are needed. This is realised either by generating the OH group during polymer synthesis—demonstrated by the preparation of hydroxyl‐functional polyurethanes from dicarbonate monomers and diamines—or by using catalysts which discriminate between primary and secondary OH groups—demonstrated by the synthesis of hydroxyl‐functional polyesters based on malic acid using scandium triflate as catalyst. In addition, the potential of carbonate couplers for the synthesis of multifunctional polyurethane is presented. The application of such multifunctional polyurethanes as antimicrobial polymers and coatings is briefly discussed. Copyright © 2012 Society of Chemical Industry     

Post‐protection effect of heat‐resistant insulations on timber‐frame members exposed to fire

In lightweight walls and floors, the load‐bearing timber members are protected by cladding on the sides to form a divider between two fire compartments or to provide appropriate fire protection to the load‐bearing members. The spaces between the timber members can be void or filled with insulation materials. Although a huge number of different insulation materials exist, the most commonly used material is mineral wool insulation. The existing design model for glass wool‐insulated timber‐frame constructions, given in European standard 1995‐1‐2, assumes collapse of the glass wool after failure of the cladding. However, a new form of glass wool insulation, suitable for use at high maximum service temperatures, is now available in the market. The charring phase after the cladding's failure is known as the post‐protection phase. The behaviour of the new heat‐resistant glass wool in the post‐protection phase is similar to that of stone wool and considerably better than that of traditional glass wool. The protective properties of stone wool have changed over the last decades. Charring is one of the main parameters needed to calculate the resistance of a structure to fire. Based on experimental investigations, this paper describes the analysis of the effect of the insulation with regard to its ability to protect timber members against charring during the post‐protection phase. Copyright © 2011 John Wiley & Sons, Ltd.     

Validation of SeaWiFS-derived chlorophyll for the Rio de la Plata Estuary and adjacent waters

The South Atlantic Ocean near the Río de la Plata Estuary is a highly dynamic region that encompasses four different water bodies: the Río de la Plata, the continental shelf and the Brazil and Malvinas currents. Bio-optical measurements obtained during 6–11 November 1999 provided the initial field data for validating Sea viewing Wide Field of view Sensor (SeaWiFS)-derived chlorophyll imagery for this region. The turbid waters of the Río de la Plata Estuary showed the highest variability and complexity in water optical properties, while the offshore waters of the Brazil Current had the lowest. In most cases, the estimates of chlorophyll using the SeaWiFS algorithm were higher than in situ measured values.     

Effects of Mn and Gd Co-substituted into ZnO on Structural and Magnetic Properties

We have worked on the structural and magnetic properties of Zn_0.99?xMn_0.01Gd _x O _δ (for x = 0.02, 0.03, and 0.04) compounds prepared by using a sol–gel method. The x-ray diffraction, scanning electron microscopy, and energy dispersive x-ray spectroscopy were used to understand the structural properties of the samples. We observed that co-substitution of Mn (1 %) and Gd (2–4 %) into the ZnO does not change the hexagonal structure. Scanning electron microscope (SEM) images show us that the grain size decreases with the increasing amount of the Gd into the ZnO matrix. The magnetic properties of the samples have been investigated by using magnetic hysteresis and DC susceptibility measurements. The ZMG1 sample shows a weak ferromagnetic behavior at room temperature, whereas the ZMG2 and ZMG3 samples exhibit a paramagnetic nature. Furthermore, it is also found that the magnetizations of the samples decrease with increasing Gd content in the ZnMnO system due to the enhancing interaction between Gd ³⁺ ions. We summarize that the co-substitution of Mn and Gd into the ZnO generates a room-temperature ferromagnetism, but it still needs more work to obtain strong and high coercivity magnetic loops for applications.     

Anteil erneuerbarer Energien und klimarelevante CO2-Emissionen aus der thermischen Verwertung von Abfällen in Österreich

Since combustible wastes usually consist of biogenic (e.g. paper, wood, food waste) and fossil organic matter (plastics), their thermal recovery results in climate neutral and climate relevant CO₂ emissions. Moreover, the fraction of biogenic materials in the waste feed is relevant for the amount of renewable energy produced. The latter has to be reported and might be subsidized according to national laws (e.g. based on European directive 2009/28/EG). The present study represents the first comprehensive evaluation of the share of biogenic and fossil materials in the waste feed of waste-to-energy (WTE) plants on a national basis. The Balance Method, which is patented on a European level by TU Wien, was applied to 10 out of 13 Austrian WTE plants (around 2.3 Mio tons of waste corresponding to around 88 % of the overall waste feed in Austrian WTE plants). The method is based on the mathematical reconciliation of the material properties (e.g. mean chemical composition of biogenic and fossil materials) and routinely recorded operating data of WTE plants (e.g. flue gas volume, CO₂ and O₂-content in the dry flue gas, steam production). The results demonstrate large variations for the share of energy from biogenic sources in the different WTE plants, ranging from 35.7 ± 2.4 % to 61.2 ± 2.7 % (based on annual averages). Additionally, for several WTE plants large temporal variations can be observed based on monthly mean values. Thus, a plant-specific and continuous evaluation of the waste composition in WTE plants (which the Balance Method allows to do at reasonable efforts) can be recommended for a reliable reporting of the renewable share of energy or fossil CO₂ emissions from waste incineration. The energy input which stems from fossil and biogenic sources can be estimated to 11,450 ± 120 TJ and 10,730 ± 110 TJ, respectively for the year 2014 (for the 10 WTE plants). In total 1060 ± 24 kt fossil CO₂ emissions from the thermal recovery of waste in Austria’s WTE plants in 2014 could be determined (estimation for all 13 WTE plants).