Effect of sliding speed on friction and wear of uni-directional aramid fibre-phenolic resin composite

A previous study on the tribological performance of a compression-moulded aramid fibre-phenolic resin composite, containing 30% continuous fibre, showed that this composite provides a reasonable combination of the friction coefficient and wear rate to be used as a friction component, such as a brake shoe. In the present work, the effect of sliding speed on the friction and wear behaviour of this composite has been investigated. The sliding experiments were conducted in a speed range of 0.1–6 m s^–1 at two normal pressure levels of 1.0 and 4.9 MPa. The coefficient of friction was found to be stable over a wide range of sliding speeds and normal pressures. The wear of the composite was found to be insensitive to changes in the speed in the higher speed range. The results have been supplemented with scanning electron micrographs to help understand possible friction and wear mechanisms.     

Theory of a multiply fed and loaded insulated linear antenna in air

Analytic expressions are derived for the input admittance and the current distribution along the multiply fed and loaded insulated antenna in air which is excited across feed gaps of nonzero widths. The Wiener-Hopf type analysis for a center fed insulated antenna is combined with the axial field discontinuity (AFD) method to develop the current and admittance expression. This AFD method considers the metallic surface of the linear antenna as a series combination of longitudinal, electric-field surface functions that exist due to feeding and/or loading. The analysis, which does not employ superposition of even and odd distributions of sources and loads, yields final expressions in terms of the excitation location, its aperture electric field within the feed gaps, impedance locations, and their values. The current distribution for cases of unity dielectric constant shows an excellent agreement with data based on the moment method. The input admittances and current distributions are reported for different multiple excitations and loads and dielectric constants of the insulator     

Bending and free vibration analysis of shear deformable laminated composite beams by finite element method

In the present investigation a higher-order shear deformation theory and the conventional first-order theory are used to develop a finite element method to analyse accurately the bending and free vibration behaviour of laminated composite beams, using nine-noded isoparametric elements. The higher-order theory assumes all the displacement components, u, v and w, which contain variation up to a cubic power of z. The effects of various parameters such as fibre orientation, stacking sequence, span-to-thickness ratio and support condition on the non-dimensionalised deflections, stresses and fundamental frequencies are investigated. Cases where only the higher-order theory is likely to yield accurate results are highlighted.     

Understanding the contributions of normal-fatigue and static loading to the dwell fatigue in a near-alpha titanium alloy

This article presents the results of a recent study of the response of an α/β-forged Ti-6Al-2Sn-4Zr-2Mo alloy during static, normal-fatigue, and dwell-fatigue loading. The plastic-strain accumulation under different loading conditions is reported. The failure modes and associated fractographic features under static, normal-fatigue, and dwell-fatigue loading conditions are also discussed. These results are used to obtain a better understanding of the relative contributions of the cyclic and creep processes to the overall damage under dwell-fatigue conditions.     

Acoustic resonance spectroscopy (ARS)

The basics of acoustic resonance spectroscopy (ARS), which provides data about an object's physical structure and composition, are explained. In ARS, one actively excites a large number of resonances (normal modes) in an object that has no internal vibrations by slowly sweeping the excitation frequency to obtain an acoustic spectrum of the object. The instrumentation for this nondestructive evaluation technique is described, and some applications are briefly discussed     

Opposite-channel-based charge injection in SOI MOSFET's under hotcarrier stress

By operating one channel of a typical SOI MOSFET in avalanche while keeping the opposite channel accumulated, charge injection into the opposite gate takes place. Three independent experiments are described that demonstrate the occurrence of this opposite-channel based charge injection. The experimental results are in agreement with PISCES numerical simulations     

Friction and wear behaviour of continuous fibre as cast Kevlar-phenolic resin composite

A compression moulded Kevlar-phenolic resin composite consisting of 30 wt% continuous fibres was slid against a steel disc such that the fibre axis was normal to the sliding plane. The sliding experiments were conducted in a normal pressure range of 0.47–4.27 MPa and at a sliding speed of 0.5 ms^–1. The initial sliding interaction is abrasive. With further sliding, as patches of polymer transfer film develop on the polymer pin and counterface, the interaction becomes adhesive and steady-state friction is established. The wear resistance of the polymer was found to be related to the stability of this film.