Bio-diesel production by alkali catalyzed transesterification of dairy waste scum

The potential of using dairy waste scum as a feed stock for bio-diesel production was investigated. Present study optimized the parameters involved in transesterification process of Dairy Waste Scum Oil. Gas chromatography was used to determine the fatty acid composition of Dairy Waste Scum Oil. Results revealed that the low free fatty acid content was a notorious parameter to determine the viability of alkaline transesterification. The yield of bio-diesel reached 96.7% when 1.2 wt.% of Potassium Hydroxide, reaction temperature of 75 °C, 30 min of time and 6:1 Methanol oil ratio at 350 rpm. Thermo gravimetric analysis followed the evaluation of transesterification process. The present analysis confirms that bio-diesel from dairy waste scum is quit suitable as an alternative to petroleum diesel with recommended fuel properties as per ASTM standards. This new way for using dairy waste scum reduces the cost of production of bio-diesel and the problem related to the disposal of Dairy scum.     

A Novel Narrow Band Red-Emitting Phosphor for White Light Emitting Diodes

Research on down conversion phosphor materials is the key for the development of solid-state lighting (SSL). Especially finding alternative red phosphor for white light emitting diodes (LEDs) based on blue or near ultraviolet (NUV) LEDs is important research task. In this view, we have synthesized a series of Eu³⁺-substituted La₂W_{2− x} Mo _x O₉ ( x =0–2, in step of 0.3) red phosphor and characterized by X-ray diffraction (XRD) and photoluminescence. XRD results reveal a phase transition from triclinic to cubic structure for x >0.2. All the compositions show broad charge transfer (CT) band due to CT from oxygen to tungsten/molybdenum and red emission due to Eu³⁺ ions. Select compositions show high red emission intensity compared with the commercial red phosphor under NUV/blue ray excitation. Hence, this candidate can be a possible red phosphor for white LEDs.     

Lactic acid fermentation of anthocyanin-rich sweet potato (Ipomoea batatas L.) into lacto-juice

Sweet potato (SP) is an important root crop grown all over the world and consumed as a vegetable, boiled, baked or often fermented into food and beverages. The grated SP roots [non- boiled and fully boiled (boiled in water at 100 °C for 15 min) were treated with 0.05% of commercial pectinase enzyme (Pectinex, Novoenzyme) in order to extract the juice. The fresh juice was inoculated with Lactobacillus plantarum MTCC 1407 culture at 28 ± 2 °C for 48 h to produce lacto-juice (LJ). The anova analysis of analytical data revealed that there was significant effect of boiling conditions (fully boiled and non-boiled) on pH [ F (1, 4) = 220.5, P  < 0.001), TA [ F (1, 4) = 78.89, P  < 0.01], starch [ F (1, 4) = 26.63, P  < 0.01), total sugar [ F (1, 4) = 61.36, P  < 0.01) and anthocyanin [ F (1, 4) = 32.86, P  < 0.01) but not on reducing sugar [ F (1, 4) = 2.48, P  = 0.19). Sensory evaluation rated the SP LJ acceptable based on texture, taste, aroma, flavour and after taste. LJ prepared from fully boiled roots with 10% cane sugar was most preferred by a consumer's panelist based on Linear Discriminant Analysis. Principal component analyses (PCA) reduced the seven original analytical variables to three independent components (factors), which accounted for 99.9% of the total variations. Similarly, six original sensory variables were reduced to two independent components, which accounted for 65.7% of the total variations.     

Vitamin A requirements assessed by plasma response to supplementation during pregnancy

The intestinal parasitic helminth infections of man in Bonny and Isiokpo communities were studied between May 1992 and March 1994. Of the 2008 stool samples examined from Bonny community, 503 (25.0%) were infected. 305 (26.7%) of these infections were males while 198 (22.9%) were females. Ascaris lumbricoides (24.1%) occurred most frequently, followed by Hookworms (18.0%), Trichuris trichiura (17.3%,) Strongyloides stercoralis (10.1%) and Enterobius vermicularis (0.1%). Peak infection (41.7%) was recorded for the males in (10-14) years age bracket. The use of bush as a toilet facility had the highest parasitic infection (38.3%), followed by that of shoreline (35.3%), pit (33.3%), Bucket (27.8%) and of water closet (7.5%). Degree of infection relative to source of drinking water showed that well water was associated with highest infection (43.3%) while the pipe borne water was the lowest (18.0%). From Isiokpo community 2,462 stool samples were examined for intestinal parasites 1,633 (66.3%) people were infected consisting of 862 (64.8%) males and 771 (68.2%) females. Higher parasitic infection of females in this community was attributed to the cultural and occupational factors. Frequency of occurrence of individual helminth was as follows: A-lumbricoides (64.5%), T. trichiura (59.4%), Hookworms (58.8%), S. stercoralis (25.1%), Hymenolepsis nana (2.9%) and E. vermicularis (0.3%). Prevalence of infection was significantly higher in Isiokpo than in Bonny because the climatic and edaphic factors were conducive to larval development and infectivity. On the contrary, the saline soil and surface water of Bonny community constituted harsh environmental conditions inimical to larval development and infectivity. Observations on parasitic infections in relation to toilet facilities and source of drinking water were similar to those made in Bonny. The study therefore demonstrated that the provision of pipe borne water and water closet facilities in rural Niger Delta communities could reduce helminth infections of man.     

Investigation of failures in stainless steel orthopaedic implant devices: pit-induced stress corrosion cracking

Journal of Materials Science Letters -     

A simple implicit scheme for stress response computation in plasticity models

In this work, the authors propose an efficient numerical method for evaluating the plastic response of a material for the applied load. Focus is confined to plasticity models using a yield surface and to small strains. The main advantage of the method is that there is no iteration need be done for the yield surface drift correction and applies a single point integration. To compute the response of a material for a particular loading, the incremental constitutive equation is derived from the plasticity model used and then it is numerically integrated. Since finite increments are used in the numerical integration procedure, computational errors crop up and accumulate causing inconsistencies in the response calculation. This is usually seen in the form of a yield surface drift. To alleviate this problem, the quantities updated have to be corrected appropriately so that the yield condition is satisfied. The authors propose a method here which corrects implicitly the quantities updated to avoid the yield surface drift. No iterations are involved. The discrete consistency condition is used in the proposed model. The authors have shown in this work that the method can be applied easily to several yield conditions and hardening rules. A numerical study is performed to evaluate the performance of the model compared to the other methods to show the efficiency of this method in the response calculations for yield surface models.     

Combined influence of throughflow and Soret effect on the onset of Marangoni convection

The onset of Marangoni convection with throughflow and the Soret effect in a top-free and bottom-rigid horizontal fluid layer is studied using the normal mode method for different types of thermal and solutal boundary combinations. The bottom surface is either conducting or insulating to temperature and solute concentration perturbations. The resulting eigenvalue problem is solved exactly by assuming that stationary convection is exhibited at the neutral state. It is found that the destabilizing behavior of a small amount of throughflow described by Nield (J Fluid Mech 185:353–360, 1987) becomes more significant in the presence of Soret effect for some boundary combinations. The results are consistent with the existing results in the literature.     

Effect of salt concentration on poly (vinyl chloride)/poly (acrylonitrile) based hybrid polymer electrolytes

Hybrid, solid polymer electrolyte films consisting of poly (vinyl chloride) (PVC), poly (acrylonitrile) (PAN) and, propylene carbonate (PC) with different concentrations of LiClO₄ are prepared by means of a using solvent-casting technique. The structure and complex formation are studied by X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. The temperature dependence of the ionic conductivities of the polymer films is explained in terms of a free volume model. The conductivities of PVC–PAN–LiClO₄–PC complexes are determined at different salt concentrations. The highest ionic conductivity (8.35 × 10⁻⁵ S cm⁻¹) is obtained for 8 wt.% LiClO₄ in the polymer complex at 304 K. The thermal stability of the electrolyte is examined by thermogravimetric/differential thermal analysis (TG/DTA).