Foams based on low density polyethylene/hectorite nanocomposites: Thermal stability and thermo‐mechanical properties

Novel polymer nanocomposite foams made by a two step compression molding method are analyzed in this article. Nanocomposites of low density polyethylene and an organo‐modified hectorite were first melt compounded and then foamed using a compression molding method. To study the influence of the presence and the amount of hectorite in both mechanical and thermal properties, samples with 3% and 7% content of hectorite were prepared. Polyethylene crystalline characteristics and thermal stability of the samples were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), respectively. Mechanical properties of foams and solid nanocomposites were analyzed by using dynamical mechanical analysis (DMA). Thermal expansion of the samples was analyzed by thermomechanical analysis. The results indicate that the exfoliation of hectorite platelets was achieved after the foaming process, but not during the melt mixing step. Foams with hectorite nanoparticles exhibit improved thermal stability and mechanical properties when compared with neat polymeric foams. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Preparation of porous thin films of a partially aliphatic polyimide

A thermally labile polymer, poly(propylene glycol), was modified to obtain PPG having an amino end group. PPG was incorporated into a partially aliphatic polyimide based on an alicyclic dianhydride, and this afforded triblock copolymers containing various amounts of PPG blocks. The thermal properties of the copolymers were investigated by thermogravimetric analysis and differential scanning calorimetry. The thermal decomposition of the PPG block in the copolymers was carried out at 240°C under various pressures to obtain porous polyimide films. The pores remained during the thermolysis under a reduced pressure of 710 mmHg, whereas they collapsed under (near) atmospheric pressure. The pore size increased as the amount of the PPG block in the copolymers increased. The dielectric constants of the porous polyimides varied from 2.60 to 2.42 with the original copolymer composition. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 532–538, 2006     

Adsorption properties of a chelating resin containing hydroxy group and iminodiacetic acid for copper ions

A chelating resin, PSGI, was synthesized by the radical polymerization of GMA‐IDA, DVB, and styrene for the removal of Cu(II), Co(II), and Cd(II) from an aqueous solution. The characteristic functional groups and chemical composition of PSGI were analyzed by Fourier transform infrared spectroscopy and elemental analysis of C, H, and N. The equilibrium adsorption capacities of PSGI from their single‐metal ion solutions were 1.46 mmol/g for Cu(II), 1.02 mmol/g for Co(II), and 1.10 mmol/g for Cd(II). The adsorption isothermal of Cu(II) by PSGI followed the Langmuir isotherm. Increasing the concentration (0–0.1 M) of KCl in Cu(II) solution affected the adsorption behavior slightly. Within the pH range of 2–5.5, decreasing the pH of the Cu(II) solution did not produce remarkable changes in the equilibrium adsorption capacities. The adsorption capacities of PSGI for Cu(II) did not cause significant change during the repeated adsorption–desorption operations. The competitive adsorption tests verified that this resin had good adsorption selectivity for Cu(II) with the coexistence of Co(II) and Cd(II). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2123–2130, 2004     

Solid polymer electrolytes. XI. Preparation,characterization and ionic conductivity of new plasticized polymer electrolytes based on chemical‐covalent polyether–siloxane hybrids

A new hybrid polymer electrolyte system based on chemical‐covalent polyether and siloxane phases is designed and prepared via the sol–gel approach and epoxide crosslinking. FT‐IR, ¹³C solid‐state NMR, and thermal analysis (differential scanning calorimetry (DSC) and TGA) are used to characterize the structure of these hybrids. These hybrid films are immersed into the liquid electrolyte (1M LiClO₄/propylene carbonate) to form plasticized polymer electrolytes. The effects of hybrid composition, liquid electrolyte content, and temperature on the ionic conductivity of hybrid electrolytes are investigated and discussed. DSC traces demonstrate the presence of two second‐order transitions for all the samples and show a significant change in the thermal events with the amount of absorbed LiClO₄/PC content. TGA results indicate these hybrid networks with excellent thermal stability. The EDS‐0.5 sample with a 75 wt % liquid electrolyte exhibits the ionic conductivity of 5.3 × 10^?3 S cm^?1 at 95°C and 1.4 × 10^?3 S cm^?1 at 15°C, in which the film shows homogenous and good mechanical strength as well as good chemical stability. In the plot of ionic conductivity and composition for these hybrids containing 45 wt % liquid electrolyte, the conductivity shows a maximum value corresponding to the sample with the weight ratio of GPTMS/PEGDE of 0.1. These obtained results are correlated and used to interpret the ion conduction behavior within the hybrid networks. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1000–1007, 2006     

Preparation of micron‐size monodispersed PS/P(St/MAA) microspheres by seeded dispersion polymerization

Uniform polystyrene (PSt) particles with the size of 1.9 μm were first prepared via dispersion polymerization, and then used as the seeds in a second‐stage dispersion copolymerization of styrene (St) and methacrylic acid (MAA) to produce carboxyl‐carrying microspheres. The PSt seed particles were swollen by monomer mixture of St and MAA, including an oil‐soluble initiator 2,2′‐azobisiso‐butyronitrile (AIBN), before polymerization. Finally, uniform PS/P(St/MAA) (polydispersity index, PDI = 1.02) microspheres with the size of 2.2 μm were obtained. The average particle size and size distribution of the final microspheres were investigated. MAA contents between 54 and 97 mg/g were detected from the PS/P(St/MAA) particles produced under different conditions. Dispersion medium has great influence on the kinetics of polymerization, due to its effect on the partitioning of monomers, solvents, and initiator in the particle phase, probably as well as on the conformation of the dispersion agent on the surface of the particles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3586–3591, 2006     

On the in‐situ polymerization of cyclic butylene terephthalate oligomers: DSC and rheological studies

The thermal and rheological behaviors of cyclic butylene terephthalate (CBT) were studied with differential scanning calorimetry (DSC) and plate–plate rheometry, respectively. DSC scans were taken at different heating rates. The related first‐heat thermograms indicated crystallization and melting of the resulting poly (butylene terephthalate) (PBT) only at very low heating rate (0.5°C/min). As the crystallization and melting enthalpies were closely matched, one could conclude that the polymerization is essentially athermic. The polymerization was accompanied by a steep increase of the melt viscosity in isothermal rheological tests performed in the temperature range T = 145–210°C. Changes in the viscoelasticity of the polymerizing CBT and crystallizing PBT could be best followed by considering the changes in the phase angle. Viscosity increased with the conversion exponentially in the first approximation. POLYM. ENG. SCI., 46:743–750, 2006. © 2006 Society of Plastics Engineers     

A Novel Inorganic Polymer as Cathode Material for Secondary Lithium Batteries

Summary: This paper introduces a new inorganic poly(phosphazene disulfide) material. With unique element composition and molecular structure, the polymer has noncombustible safety and preferable conductivity. When used as cathode material for rechargeable lithium batteries, the polymer's first discharge capacity is as high as 467.9 mAh · g^?1, which can be retained at 409.9 mAh · g^?1 after 60 repeated cycles. Therefore, it has a great application potential in the field of lithium batteries.

Replacement of the Cl atoms by S? S groups by refluxing Na₂S₂ and linear poly(dichloro‐phosphazene).     

Effects of poly(methyl methacrylate)‐based low‐profile additives on the properties of cured unsaturated polyester resins. II. Volume shrinkage characteristics and internal pigmentability

The effects of three series of self‐synthesized poly(methyl methacrylate) (PMMA)‐based low‐profile additives (LPAs), including PMMA, poly(methyl methacrylate‐co‐butyl acrylate), and poly(methyl methacrylate‐co‐butyl acrylate‐co‐maleic anhydride) with different chemical structures and MWs on the volume shrinkage characteristics and internal pigmentability for low‐shrink unsaturated polyester (UP) resins during curing were investigated by an integrated approach of static phase characteristics of the ternary styrene (ST)/UP/LPA system, reaction kinetics, cured‐sample morphology, microvoid formation, and property measurements. The relative volume fraction of microvoids generated during the cure was controlled by the stiffness of the UP resin used, the compatibility of the uncured ST/UP/LPA systems, and the glass‐transition temperature of the LPAs used. On the basis of the Takayanagi mechanical model, the LPA mechanism on volume shrinkage control, which accounted for phase separation and microvoid formation, and factors leading to both a good volume shrinkage control and acceptable internal pigmentability for the molded parts are discussed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3388–3397, 2004     

CO2‐assisted polymer processing: A new alternative for intractable polymers

CO₂‐assisted polymer processing is proposed as an alternative route for intractable and high molecular weight polymers based on the plasticization effects of CO₂ and its direct effect on the melting behavior of semicrystalline polymers. A modified processing system was used to process a variety of polymers in the presence of high‐pressure CO₂. The system includes an extruder that was modified to allow for high pressures created by the injection of CO₂. The new design includes a modified feed section that allows a given mass of polymer to interact with CO₂ before and during the extrusion process. The inherent shear mixing and the presence of CO₂ allow for a specific control over the extrudate morphology. Results suggest that this alternative design provides a new and easy route to melt process high melt viscosity polymers of commercial importance, such as polytetrafluoroethylene (PTFE), fluorinated ethylene propylene copolymer (FEP), and syndiotactic polystyrene (s‐PS). The increased processability of these systems in CO₂ is related to the plasticization effect of CO₂ that was quantified through a depression in the glass‐transition temperature according to the Chow model. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1501–1511, 2004     

Glass transition and mechanical properties of PLLA and PDLLA‐PGA copolymer blends

The change of the glass transition temperatures (T_g) in the blend of poly(L ‐lactic acid) (PLLA) and the copolymers of poly(D,L ‐lactic acid) and poly(glycolic acid) (PDLLA‐PGA) with different D,L ‐lactic acid and glycolic acid composition ratio (50 : 50, 65 : 35, and 75 : 25) was studied by DSC. Dynamic mechanical measurement and tensile testing were performed at various temperatures around T_g of the blend. In the blend of PLLA and PDLLA‐PGA50 (composition ratio of PDLLA and PGA 50 : 50), T_g decreased from that of PLLA (about 58°C) to that of PDLLA‐PGA50 (about 30°C). A single step decrease was observed in the DSC curve around T_g between the weight fraction of PLLA (W(PLLA)) 1.0 and 0.7 (about 52°C) but two‐step changes in the curve are observed between W(PLLA) = 0.6 and 0.3. The T_g change between that of PLLA and that of PDLLA‐PGA and the appearance of two T_gs suggest the existence of PLLA rich amorphous region and PDLLA‐PGA copolymer rich amorphous region in the blend. A single step decrease of E′ occurs at around T_g of the pure PLLA but the two‐step decrease was observed at W(PLLA) = 0.6 and 0.4, supporting the existence of the PLLA rich region and PDLLA‐PGA rich region. Tensile testing for various blends at elevated temperature showed that the extension without yielding occurred above T_g of the blend. Partial miscibility is suggested for PLLA and PDLLA‐PGA copolymer blends. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 2164–2173, 2004