Free amino acid supplementation to steers: effects on ruminal fermentation and performance

Three studies were conducted to evaluate amino acid utilization by cattle. In Exp. 1, five steers (580 kg) were fed 86% rolled corn diets with mixtures of amino acids containing up to 6 g/d DL-Met, 24 g/d L-Lys, 6 g/d L-Thr, and 3 g/d L-Trp. Treatments had little effect on ruminal fermentation, diet digestibility, N flow to the duodenum, or microbial efficiency. Ruminal concentrations of Met and Lys increased linearly (P < .05) with amino acid supplementation, whereas Thr responded quadratically, and Trp was not altered. In Exp. 2, four steers (414 kg) were used to measure effects of dietary monensin or laidlomycin propionate in high-grain diets supplemented with amino acids. Ionophores had no significant effect on ruminal fermentation or outflows of amino acids from the rumen. In Exp. 3, 100 steers (287 kg initial BW) were fed diets containing 1% of a nonprotein N source. Treatments were 1) no supplemental N (UREA), 2) UREA plus soybean meal (SBM), 3) UREA plus 2 g/d DL-Met, 8 g/d L-Lys, 2 g/d L-Thr, and 1 g/d L-Trp, or 4) UREA plus 4 g/d DL-Met, 16 g/d L-Lys, 4 g/d L-Thr, and 2 g/d L-Trp. During the growing period (diets based on whole-plant milo silage), gains were higher for SBM-supplemented steers than for UREA steers and intermediate for steers supplemented with amino acids. Few significant differences in performance were observed among treatments during the finishing phase (diets based on dry-rolled corn) or for the entire experiment, but cattle fed SBM or amino acids tended to be fatter and have better marbling scores and quality grades. Amino acids did not greatly alter ruminal fermentation or cattle performance.     

Preparation and catalytic activity of K4Zr5O12 for the oxidation of soot from vehicle engine emissions

Pure phase K₄Zr₅O₁₂ is synthesized via solid state method in the present work. Various K/Zr ratios and temperatures are applied, and the synthesis process is investigated in detail by means of X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy. Its catalytic activity for soot oxidation is studied by temperature programmed oxidation with different types of soot/catalyst contacts. It is revealed that K₄Zr₅O₁₂ is very active in the presence of 2–10% O₂ for both tight and loose contacts (T_p(tight) = 335 °C, T_p(ethanol) = 355 °C and T_p(shaking) = 370 °C). Thermal stability study shows that K₄Zr₅O₁₂ is highly stable up to at least 900 °C.     

Development of dieldrin,endosulfan, and hexachlorobenzene‐imprinted polymers for dye‐displacement array sensing

Due to the toxicity associated with the exposure to organochlorine pesticides, new materials capable of selectively capturing and detecting these compounds are highly desirable. In this study, imprinted polymers were prepared using three organochlorine pesticides—dieldrin (DE), endosulfan (EN), or hexachlorobenzene (HCB) as templates. The MIPs were polymerized via precipitation polymerization. The yields were over 90% with particle sizes ranging from 62 to 214 nm. Binding studies combined with GC‐ECD analysis showed that each template is more selective to its corresponding MIP compared with the other two structurally homologous templates. These results were consistent with those obtained using UV–vis where more bromocresol green (BCG) dye was released when higher template concentrations were introduced to the corresponding BCG‐impregnated MIPs. Since unique selectivity response pattern for each of the MIPs was obtained, this demonstrated that the MIPs were selective and can be potentially used in dye‐displacement array sensing. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44401.     

Optimal layout of additional facilities for minimization of domino effects based on worst-case scenarios

Accidents involving domino effects are more serious than other type of accidents. Although there have been studies on such accidents, it is still difficult to examine the actual factors and causes since the domino effect is influenced nonlinearly by factors involving flame, overpressure, and flying objects. We considered the case of adding new facilities to an existing system in a given site. The layout of new facilities suggests positions that minimize the domino effects, based on nonlinear optimization taking domino factors into account. We quantitatively calculated the domino risk of each facility through the concept of combined domino factors (flame, overpressure, and missile). Also, we identified variations of domino damage extent of the target system through comparison of the impacts of domino effect when additional facilities were installed. Simulated annealing was adopted for searching optimal positions. As a case study, we applied the proposed method to the case of adding DME storage tanks in the existing LPG charging facilities. The presented framework of the quantitative assessment of domino risk and safety standard for the layout of additional facilities would be useful for proper layout design for improved accident prevention.     

The effect of halloysite additive on operation of boilers firing agricultural biomass

The paper presents results of investigations on using halloysite as an additive in biomass-fired boilers. It has been shown that in the case of a few different agricultural biomasses the halloysite addition increased the ash sintering temperature to the values noted for coals. This is an effect of bonding sodium and potassium in the form of chlorides and other compounds. In practical terms the halloysite additive may reduce slagging and fouling of boiler heating surfaces as well as deteriorate the agglomeration processes in fluidized beds. Moreover, addition of halloysite reduces the amount of KCl and NaCl present in ash (and therefore in ash deposits) thus decreasing the rate of high temperature corrosion.     

Thermosensitivity control of polyethlyenimine by simple acylation

Branched polyethylenimine (b-PEI), an amine-rich polymer, can obtain thermosensitivity by a simple acylation reaction. The resulting N-acylated b-PEI derivatives showed a similar lower critical solution temperature (LCST) transition as their linear correspondent, poly(N-alkyloxazoline). Three acyl groups (propionyl, and isobutyryl, and n-butyryl) were introduced and resulted in LCSTs ranging from 10 °C to 90 °C depending on the structure and environment. The hydrophobicity of N-acylated b-PEI can be controlled by varying the acyl group and degree of acylation. Because the LCST transition is determined by the delicate balance between the hydrophobicity and hydrophilicity of the polymers, an increase of the hydrophobicity in N-acylated b-PEI lowers the transition temperature. Also, N-acylated b-PEI contains tertiary amines as well as unacylated primary or secondary amines which can be protonated during acidification from a pH of 7.4 to a pH of 5.5. The LCST transition was observed at elevated temperatures due to the increase of hydrophilicity by the protonation in the acidic environment. The LCST was also influenced by the salt concentration. A decrease of the LCST was observed as the NaCl concentration increased, probably due to the dominance of the salting-out effect. The very simple introduction of thermosensitivity into pre-existing polymers can be easily applied for the development of various dual or multiple signal-sensitive polymer systems.     

CO2 laser-assisted preparation of transparent Eu2Ti2O7 thin films

We present a laser-assisted preparation of transparent europium-titanate Eu₂Ti₂O₇ thin films with tailored structural and optical properties. We have evaluated the effects of the irradiation time on the structural and the optical properties of the films. This approach allows the preparation of nanocrystalline crack-free films and micro patterns. The amorphous thin films were prepared by a sol-gel method. The films were annealed by a CO₂ laser beam for various time intervals. The laser irradiation induced a crystallization process that resulted in the formation of Eu₂Ti₂O₇ nanocrystals. The nanocrystals regularly grew with increasing irradiation time reaching the size from 25?nm to 45?nm. A film of a thickness 480?nm exhibited an optical transmission of 91.9% that is close to the maximal theoretical limit. The film's refractive index at 632?nm was 2.26. A micrometric pattern was prepared by a direct laser writing followed by a wet chemical etching. Feasibility of the demonstrated approach, together with the high film's quality, and europium-titanate chemical resistivity open up many opportunities for advanced applications. The approach can be used for a preparation of protective coatings and integrated photonic devices such as planar optical waveguides and couplers.     

Hybrid stepping motor vibration

This article presents a simple method to calculate the stator surface vibration of a unipolar four-phase hybrid stepping motor. The approximate radial magnetic force per pole is calculated by using a permeance model and its equivalent magnetic circuit. Based on the calculated radial magnetic forces and the measured stator mobility values, the radial vibration spectrum on top of a stator pole is estimated. The results have shown that there is a reasonable agreement between the calculated and measured radial vibration levels. This verifies the analytical approach which, due to the special structure and excitation of the motor, is significantly different from the technique commonly employed for vibration study for induction machines     

Biomineralized hyaluronic acid/poly(vinylphosphonic acid) hydrogel for bone tissue regeneration

Novel biomineralized hydrogels composed of hyaluronic acid (HA) and vinyl phosphonic acid (VPAc) were designed with the aim of developing a biomimetic hydrogel system to improve bone regeneration by local delivery of a protein drug including bone morphogenetic proteins. We synthesized crosslinked hydrogels composed of methacrylated HA and poly(VPAc) [P(VPAc)], which serves as a binding site for calcium ions during the mineralization process. The HA/P(VPAc) hydrogels were biomineralized by a urea‐mediation method to create functional polymer hydrogels that can deliver the protein drug and mimic the bone extracellular matrix. The water content of the hydrogels was influenced by the HA/P(VPAc) composition, crosslinking density, biomineralization, and ionic strength of the swelling media. All HA/P(VPAc) hydrogels maintained more than 84% water content. Enzymatic degradation of HA/P(VPAc) hydrogels was dependent on the concentration of hyaluronidase and the crosslinking density of the polymer network within the hydrogel. In addition, the release behavior of bovine serum albumin from the HA/PVPAc hydrogels was mainly influenced by the drug loading content, water content, and biomineralization of the hydrogels. In a cytotoxicity study, the HA/P(VPAc) and biomineralized HA/P(VPAc) hydrogels did not significantly affect cell viability. These results suggest that biomineralized HA/P(VPAc) hydrogels can be tailored to create a biomimetic hydrogel system that promotes bone tissue repair and regeneration by local delivery of protein drugs. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41194.