Fiber-reinforced concrete (FRC) has been used in structural applications in order to enhance the structural performance under dynamic loading and reduce cracking and spalling phenomena by increasing toughness, ductility, and tensile strength of the concrete. High-performance fiber-reinforced cement based composite (HPFRC) is a high-strength FRC with enhanced high-performance characteristics. Recent studies have shown that HPFRC has higher impact resistance than other types of concrete. Therefore, it has been widely considered as a promising material for the construction of important and strategic structures. HPFRC panels are tested by drop projectiles up to an impact at which failure occurs. Mechanical properties of HPFRC are obtained to define material parameters in the MAT_SOIL_CONCRETE model in LS-DYNA, which is used to simulate the behavior of HPFRC panel under impact loading and perform parametric studies. Predicted crack and failure patterns on both sides of the HPFRC panel based on finite element simulation are in good agreement with their corresponding experimental results. 相似文献
This paper examines the effect of mediated hugs that are achieved with a huggable communication medium on the brain activities of users during conversations. We measured their brain activities with functional near-infrared spectroscopy (NIRS) and evaluated them with two information theoretic measures: permutation entropy, an indicator of relaxation, and multiscale entropy, which captures complexity in brain activation at multiple time scales. We first verify the influence of lip movements on brain activities during conversation and then compare brain activities during tele-conversation through a huggable communication medium with a mobile phone. Our analysis of NIRS signals shows that mediated hugs decrease permutation entropy and increase multiscale entropy. These results suggest that touch interaction through a mediated hug induces a relaxed state in our brain but increases complex patterns of brain activation. 相似文献
Research in multi-robot pursuit-evasion demonstrates that three pursuers are sufficient to capture an intruder in a polygonal environment. However, this result requires the confined of the initial location of the intruder within the convex hull of the locations of the pursuers. In this study, we extend this result to alleviate this convexity through the application of a set of virtual goals that are independent of the locations of the pursuers. These virtual goals are solely calculated using the location information of the intruder such that whose locations confine the intruder within their convex hull at every execution cycle. We propose two strategies to coordinate the pursuers. They are the agents votes maximization and the profile matrix permutations strategies. We consider the time, the energy expended, and the distance traveled by the pursuers as metrics to analyze the performance of these strategies in contrast to three different allocation strategies. They are the probabilistic, the leader-follower, and the prioritization coordination strategies. 相似文献
This paper addresses kinematics of a 3 degree-of-freedom (DOF) planar parallel manipulator called Star-Triangle manipulator. The manipulator has good accuracy and a relatively large singularity-free workspace. First, position analysis of the manipulator is implemented indicating that both the inverse and forward position problems of the manipulator have only one solution. Then, velocity and singularity analyses of the manipulator are carried out and its isotropic configurations are identified using two Jacobian matrices. Based on the isotropic conditions, the workspace of manipulator is determined geometrically and it is shown that all points in the workspace are free of singularities. At last, kinematic accuracy of the manipulator is investigated on the workspace through a kinematic conditioning index (KCI). 相似文献
This forensic study is unique in that it involves a pavement warranty specification. Extensive field and laboratory testing was conducted to determine the cause(s) of longitudinal cracks observed on the surface. Four trenches were cut and removed to allow more testing on top of each pavement layer. The tests found that the stiffness of the foamed asphalt base is higher than that of a typical flexible base. However, the subgrade modulus is low compared with the average subgrade modulus in Texas. Water seeped into two trenches (dug into the road where there were surface cracks) within 20 min of digging. No water was observed in the other two trenches, where there were no surface cracks. The two trenches with surface cracks have lower base density and higher base moisture content than the two with no surface cracks. Based on observations of the trenching and coring operations, the same surface cracks have been detected in the base layer. Cracks up to 150 mm into the base layer have been observed. Although cracks have been observed in the base (and they can be related to lower stiffness and higher falling weight deflectometer deflections), it is difficult to determine if the cause of surface cracks is due to the base layer alone. It is difficult to prove if the layer is responsible for the failure, except by properties listed in the specification. One faulty pavement layer can easily cause the failure of other layers. For warranty purposes, layer-specific failure criteria should be clearly outlined. The base did not meet the gradation specification. The field material was substantially finer than specified. While some specifications may have been violated, there is little evidence to show that the cause of the longitudinal cracking is primarily related to the foamed-asphalt-stabilized base. 相似文献
The MHD Jeffery-Hamel flows in non-parallel walls are investigated analytically for strongly nonlinear ordinary differential equations using homotopy analysis method (HAM). Results for velocity profiles in divergent and convergent channels are presented for various values of Hartmann and Reynolds numbers. The convergence of the obtained series solutions is explicitly studied and a proper discussion is given for the obtained results. Comparison between HAM and numerical solutions showed excellent agreement. 相似文献
In this paper we have presented a TOPSIS approach based on preference ratio and an efficient fuzzy distance measurement for a Fuzzy Multiple Criteria Group Decision-Making Problem (FMCGDMP). Preference ratio with a moderate modification for negative fuzzy numbers was used as an efficient ranking method for fuzzy numbers in a relative manner. As human reasoning persuades that distances between two fuzzy numbers should be a fuzzy measure, so all distances between fuzzy numbers (i.e. distances between alternatives, Fuzzy Positive Ideal solutions, and Fuzzy Negative Ideal solutions) have been calculated as fuzzy numbers using an efficient fuzzy distance measurement. The aforementioned arguments make the proposed algorithm unique and well posed for real-life problem modeling. Moreover, the main novelties of the proposed procedure (i.e. the fuzzy distance measurement and Preference Ratio) have been developed for Generalized Fuzzy Numbers (GFNs). The proposed algorithm has efficiently been applied in assessment of traffic police centers which is treated as a FMCGDMP. 相似文献
We present an interactive, menu-driven software package which allows the design of three-dimensional structures from standardized component modules. The standardized component modules used as example building blocks in the project are rectangular solids of several sizes.
The system has been designed such that its output (i.e. the design database) can be used to automatically generate a robot motion program to assemble the designed structure.
Presented are the system database and its internal data structure, an object placement-sequencer algorithm, a height specification and interference checking algorithm, and a balance-checking algorithm. To avoid the creation of dynamic obstacles and interference of the robot arm with these obstacles, the proper sequencing of the blocks in the design database is essential. The object placement-sequencer algorithm is responsible for proper sequencing of the blocks in the design database to avoid the aforementioned problem. The height specification and interference checking algorithm automatically generates the proper positioning of a block in the design by performing a sequential search over the accumulated design structure. The stacking feasibility of the blocks in the design is verified by the balance-checking algorithm, prior to the acceptance of the block as a permanent part of the design. 相似文献
In this study, the Geocoat™ technology was used for the extraction of zinc from a mineral concentrate obtained from the Kooshk mine (Yazd, Iran) by a culture dominated by the mesophilic bacterium Acidithiobacillusferrooxidans in a packed column bioreactor. A low grade sphalerite ore was used as support for the concentrate coating. During the 100 days of leaching pH, Fe3+, Fetotal, microbial population density and zinc extraction were measured. The final zinc extraction from concentrate and low grade support was 97% and 78%, respectively, and it was found that leaching from the support does not proceed significantly before leaching from the coating is completed. 相似文献