Immobilizing chromium in stainless steel slags with MnO addition

This work investigates the stabilizing impact of MnO on the leaching behavior of hazardous Cr-containing CaO-SiO₂-Al₂O₃-Cr₂O₃-MnO stainless steel slags after equilibrating at various elevated temperatures and evaluates the potential immobilization of Cr into a MnCr₂O₄ spinel phase from the existing Cr₂O₃ phase. The MnCr₂O₄ spinel phase was found to be an excellent Cr-stabilizer in stainless steel slags, where the leaching tendency of potentially hazardous Cr-related ions decreased with higher MnO content and lower equilibration temperatures within the range of 0 to 15 mass pct. and 1500 to 1300°C, respectively. Thermodynamic calculations by conducting the phase stability diagram also showed that the MnCr₂O₄ spinel phase was relatively stable and the Ca₃Si₂O₇ (Ca_3-xMn_xSi₂O₇) phase was relatively unstable compared with other crystal phases in acid extractant with pH value of 3.2. Combined with the scanning electron microscopy and X-ray powder diffraction results along with the thermodynamic calculations, the leached Cr-related ions was predominantly originating from the unstable amorphous glass phase.     

Isothermal oxidation of physical vapor deposited partially stabilized zirconia thermal barrier coatings

Thermal barrier coatings (TBCs), consisting of physical vapor deposited (PVD) partially stabilized zirconia (PSZ, 8 wt.%Y₂O₃) and a diffusion aluminide bond coat, were characterized as a function of time after oxidative isothermal heat treatment at 1373 K in air. The experimental characterizations was conducted by X-ray diffraction analysis and scanning electron microscopy (SEM) with energy-dispersive spectroscopy. During cooling to room temperature, spallation of the PSZ ceramic coatings occurred after 200 and 350 h of isothermal heat treatment. This failure was always sudden and violent, with the TBC popping from the substrate. The monoclinic phase of zirconia was first observed on the bottom surface of the PVD PSZ after 200 h of isothermal heat treatment. The failure of TBCs occurred either in the bond coat oxidation products of αAl₂O₃ and rutile TiO₂ or at the interface between the oxidation products and the diffusion aluminide bond coat or the PSZ coating.     

Design and Implementation of a Ubiquitous Robotic Space

This paper describes a concerted effort to design and implement a robotic service framework. The proposed framework is comprised of three conceptual spaces: physical, semantic, and virtual spaces, collectively referred to as a ubiquitous robotic space. We implemented a prototype robotic security application in an office environment, which confirmed that the proposed framework is an efficient tool for developing a robotic service employing IT infrastructure, particularly for integrating heterogeneous technologies and robotic platforms.     

Implementation of mmWave long-range backhaul for UAV-BS

Uncrewed aerial vehicles (UAVs) have become a vital element in nonterrestrial networks, especially with respect to 5G communication systems and beyond. The use of UAVs in support of 4G/5G base station (uncrewed aerial vehicle base station [UAV-BS]) has proven to be a practical solution for extending cellular network services to areas where conventional infrastructures are unavailable. In this study, we introduce a UAV-BS system that utilizes a high-capacity wireless backhaul operating in millimeter-wave frequency bands. This system can achieve a maximum throughput of 1.3 Gbps while delivering data at a rate of 300 Mbps, even at distances of 10 km. We also present the details of our testbed implementation alongside the performance results obtained from field tests.     

Facile synthesis of CsPbBr3/PbSe composite clusters

In this work, CsPbBr₃ and PbSe nanocomposites were synthesized to protect perovskite material from self-enlargement during reaction. UV absorption and photoluminescence (PL) spectra indicate that the addition of Se into CsPbBr₃ quantum dots modified the electronic structure of CsPbBr₃, increasing the band gap from 2.38 to 2.48 eV as the Cs:Se ratio increased to 1:3. Thus, the emission color of CsPbBr₃ perovskite quantum dots was modified from green to blue by increasing the Se ratio in composites. According to X-ray diffraction patterns, the structure of CsPbBr₃ quantum dots changed from cubic to orthorhombic due to the introduction of PbSe at the surface. Transmission electron microscopy and X-ray photoemission spectroscopy confirmed that the atomic distribution in CsPbBr₃/PbSe composite clusters is uniform and the composite materials were well formed. The PL intensity of a CsPbBr₃/PbSe sample with a 1:1 Cs:Se ratio maintained 50% of its initial intensity after keeping the sample for 81 h in air, while the PL intensity of CsPbBr₃ reduced to 20% of its initial intensity. Therefore, it is considered that low amounts of Se could improve the stability of CsPbBr₃ quantum dots.     

Differences in Epstein-Barr virus expression between primary and secondary cutaneous angiocentric lymphomas. French Study Group of Cutaneous Lymphomas

OBJECTIVE: The aim of this investigation was to report on the radiographic interpretation of the hard palate and nasal fossa floor in panoramic radiographs by studying different skulls, x-ray machines, and head positions in relationship to the Frankfort plane before and after ostectomy. STUDY DESIGN: Twenty dry human skulls were radiographed with three different panoramic x-ray machines in three different positions. Three of the skulls were submitted to different ostectomies. RESULTS: Multiple images of the hard palate and nasal fossa floor were present in 96.12% of the radiographs. Single images (3.88%) occurred only in the "chin up" position. CONCLUSIONS: The lower image represents the nasal fossa floor, especially its lateral and anterior limits. The upper images are double real images mainly formed by the junction of the nasal septum with the nasal fossa floor and possibly by posterior parts of the hard palate and nasal fossa floor. All images overlap in the "chin up" position becoming a single image. The most common shape of the anatomic landmark was wide angle "W" (58.33%). Other shapes present in positions "chin up" and "chin down" indicate patient positioning errors. The x-ray machines did not influence the results.     

Congenital fibrosis of the extraocular muscles type 2, an inherited exotropic strabismus fixus, maps to distal 11q13

The extraocular fibrosis syndromes are congenital ocular-motility disorders that arise from dysfunction of the oculomotor, trochlear, and abducens nerves and/or the muscles that they innervate. Each is marked by a specific form of restrictive paralytic ophthalmoplegia with or without ptosis. Individuals with the classic form of congenital fibrosis of the extraocular muscles (CFEOM1) are born with bilateral ptosis and a restrictive infraductive external ophthalmoplegia. We previously demonstrated that CFEOM1 is caused by an autosomal dominant locus on chromosome 12 and results from a developmental absence of the superior division of the oculomotor nerve. We now have mapped a variant of CFEOM, exotropic strabismus fixus ("CFEOM2"). Affected individuals are born with bilateral ptosis and restrictive ophthalmoplegia with the globes "frozen" in extreme abduction. This autosomal recessive disorder is present in members of three consanguineous Saudi Arabian families. Genetic analysis of 70 individuals (20 affected individuals) reveals linkage to markers on chromosome 11q13, with a combined LOD score of 12.3 at the single nonrecombinant marker, D11S1314. The 2.5-cM CFEOM2 critical region is flanked by D11S4196/D11S4162 and D11S4184/1369. Two of the three families share a common disease-associated haplotype, suggesting a founder effect for CFEOM2. We hypothesize that CFEOM2 results from an analogous developmental defect to CFEOM1, one that affects both the superior and inferior divisions of the oculomotor nerve and their corresponding alpha motoneurons and extraocular muscles.     

Purification and properties of beta-N-Acetylhexosaminidase from cabbage

beta-N-Acetylhexosaminidase was purified from the extract of cabbage by sequential steps of ammonium sulfate fractionation, chromatofocusing, DEAE-Sepharose CL-6B ion exchange chromatography and Sephacryl S-200 HR gel filtration. By these steps, the purity of the enzyme increased by 256 fold with a recovery of 8%. The purified enzyme was homogeneous as examined by native PAGE. It showed an optimal pH of 4, an optimal temperature of 60 degrees C and a Km of 0.94 mM for hydrolysis of pNp-beta-GlcNAc. The molecular mass of the enzyme determined from filtration through Sephacryl S-200 was 150 kDa. Three subunits with molecular mass of 64, 57 and 51 kDa were observed as determined by SDS-PAGE. NBS (0.025 mM), DEPC (3 mM) and WRK (30 mM) significantly inhibited the activity of the enzyme. The enzyme also showed activity toward pNp-beta-GalNAc, N,N'-diacetylchitobiose, N,N',N"-triacetylchitotriose and N,N',N",N"'-tetraacetyl chitotetraose but showed no activity toward pNp-alpha-GlcNAc, chitin and ethylene glycol chitin.