MARVLE: a VLSI chip for data compression using tree-based codes

Describes the architecture and design of a CMOS VLSI chip for data compression and decompression using tree-based codes. The chip, called MARVLE, implements a memory-based architecture for variable length encoding and decoding based on tree-based codes. The architecture is based on an efficient scheme of mapping the tree representing any binary code onto a memory device. A prototype 2-mm CMOS VLSI chip has been designed, verified, and fabricated by the MOSIS facility. The chip has a 512×12 static RAM with an access time of 4 ns and logic circuitry for compression as well as decompression. The chip occupies a silicon area of 6.8 mm×6.9 mm and consists of 49695 transistors. The prototype chip yields a compression rate of 95.2 Mb/s and a decompression rate of 60.6 Mb/s with a clock rate of 83.3 MHz. The VLSI hardware can be used to implement the JPEG baseline compression scheme     

Performance evaluation of TiAlCrYN nanocomposite coatings deposited using four-cathode reactive unbalanced pulsed direct current magnetron sputtering system

Approximately 1.5-2.5 μm thick nanocomposite coatings of TiAlCrYN were deposited using a four-cathode reactive unbalanced pulsed direct current magnetron sputtering system from the sputtering of Ti, Al, Cr, and Y targets in Ar + N₂ plasma. The TiAlCrYN nanocomposite coatings were deposited on various substrates such as high speed steel (HSS) drill bits, mild steel and silicon. TiAlCrYN coatings with almost similar mechanical properties but with different Ti, Al, Cr and Y contents were prepared to study their thermal stability and machining performance. The structural and mechanical properties of the coatings were characterized using X-ray diffraction and nanoindentation technique, respectively. The elemental composition, bonding structure, surface morphology and cross-sectional data were studied using energy-dispersive X-ray analysis, X-ray photoelectron spectroscopy and field-emission scanning electron microscopy, respectively. Nanoscratch tests were performed to determine the adhesive strength of the coatings. The corrosion behavior of TiAlCrYN nanocomposite coatings on mild steel substrate was studied using potentiodynamic polarization in a 3.5% NaCl solution. Micro-Raman spectroscopy was used to characterize the structural changes as a result of heating of the nanocomposite coatings in air (600-1000 °C). TiAlCrYN coatings prepared at 17 at.% Ti, 13 at.% Al, 21 at.% Cr and 1 at.% Y exhibited thermal stability as high as 900 °C in air (denoted as Sample 3). For the performance evaluation, the TiAlCrYN coated HSS drill bits were tested under accelerated machining conditions. With a drill speed of 800 rpm and a feed rate of 0.08 mm/rev the TiAlCrYN coated HSS drill bits (Sample 3) averaged 657 holes, while drilling a 12 mm thick 304 stainless steel plate under dry conditions, before failure. Whereas, the uncoated drill bits failed after drilling 50 holes under the same machining conditions. Results indicated that for the HSS drill bits coated with TiAlCrYN, the tool life increased by a factor of more than 12.     

Mobility support for IP over wireless ATM

A wireless ATM system consists of a core network infrastructure that provides mobility support to end terminals and a wireless access link. This article outlines two schemes for supporting mobility of IP terminals in this network. In the first scheme, location management and handoff support is integrated within the ATM signaling and control framework (“mobile ATM”), and mobility is transparently supported at the IP layer by mobile ATM underneath. In the second approach, the IP protocol stack is directly executed on ATM switches (without an intermediate ATM signaling stack) using an IP switching technique called IPSOFACTO (IP Switching Over Fast ATM Cell Transport), and terminal mobility is supported via mobile IP     

Microstructural characterization of transparent conducting aluminium doped zinc oxide films prepared by spray pyrolysis

X-ray diffraction patterns of pyrolytically sprayed aluminium doped zinc oxide films have been recorded and X-ray line profile analysis studies have been carried out after correcting for instrumental broadening. Different microstructural parameters such as crystallite size, r.m.s. strain and dislocation density have been determined from the variance analysis of X-ray line profiles. Texture coefficient, the degree of preferred orientation of the crystallites and stacking fault have been estimated from the X-ray diffraction data. It is observed that the figure of merit as a transparent conductor depends on the dopant concentration and microstructural parameters of the films deposited under identical growth conditions.     

Photoluminescence properties of sesquioxide doped ceria synthesized by modified sol-gel route

Highly crystalline and porous sesquioxide (Sm₂O₃, La₂O₃) doped ceria with different molar ratio is successfully synthesized by a simple modified sol-gel route. X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDAX) are used to investigate their phase, microstructure and composition. XRD analysis confirmed the formation of highly crystalline cubic fluorite phase in all samples. The Raman spectroscopy revealed a single triple degenerated F_2g mode as the attestation of the oxygen vacancy in the doped and undoped samples. Strong photoluminescence lines due to interconfigurational transition and vacancy mediated transition were observed in doped CeO₂. The oxygen vacancy induced luminescence of CeO₂ was strongly enhanced due to La doping. The effect of rare earth dopant on the photoluminescence properties has been studied in details.     

Kinetic modelling and microbial community assessment of anaerobic biphasic fixed film bioreactor treating distillery spent wash

Anaerobic digestion, microbial community structure and kinetics were studied in a biphasic continuously fed, upflow anaerobic fixed film reactor treating high strength distillery wastewater. Treatment efficiency of the bioreactor was investigated at different hydraulic retention times (HRT) and organic loading rates (OLR 5-20 kg COD m⁻³ d⁻¹). Applying the modified Stover-Kincannon model to the reactor, the maximum removal rate constant (U_max) and saturation value constant (K_B) were found to be 2 kg m⁻³ d⁻¹ and 1.69 kg m⁻³ d⁻¹ respectively. Bacterial community structures of acidogenic and methanogenic reactors were assessed using culture-independent analyses. Sequencing of 16S rRNA genes exhibited a total of 123 distinct operational taxonomic units (OTUs) comprising 49 from acidogenic reactor and 74 (28 of eubacteria and 46 of archaea) from methanogenic reactor. The findings reveal the role of Lactobacillus sp. (Firmicutes) as dominant acid producing organisms in acidogenic reactor and Methanoculleus sp. (Euryarchaeotes) as foremost methanogens in methanogenic reactor.     

A model for optimal repair-effort decision for standby redundant systems with common-cause failures and its application to pulverizer systems

This paper presents a model to allocate the repair efforts optimally between the individual unit and the subsystem contributing to the common cause failure of the system with a view to improving the overall system availability. It describes a general model to solve repair-effort decision problem for a redundant system with common-cause failures and three types of repair. The application of this model to a pulverizer system is also presented in this paper.     

Structural basis for the recognition of carbohydrates by human galectin-7

Knowledge about carbohydrate recognition domains of galectins, formerly known as S-type animal lectins, is important in understanding their role(s) in cell-cell interactions. Here we report the crystal structure of human galectin-7 (hGal-7), in free form and in the presence of galactose, galactosamine, lactose, and N-acetyl-lactosamine at high resolution. This is the first structure of a galectin determined in both free and carbohydrate-bound forms. The structure shows a fold similar to that of the prototype galectins -1 and -2, but has greater similarity to a related galectin molecule, Gal-10. Even though the carbohydrate-binding residues are conserved, there are significant changes in this pocket due to shortening of a loop structure. The monomeric hGal-7 molecule exists as a dimer in the crystals, but adopts a packing arrangement considerably different from that of Gal-1 and Gal-2, which has implications for carbohydrate recognition.     

Refrigerants as working fluid in a CPC collector system for electric power generation

Compound parabolic concentrators (CPC) achieve highest possible concentration for any acceptance angle. One of the simplest methods of utilizing the energy of the sun to generate electric power is to use a CPC collector system. A truncated CPC can be used without much loss in concentration. Compared with a full CPC the cost of construction of a truncated CPC is much less. A CPC requires only seasonal adjustments. This further reduces the cost of tracking which is required for other types of concentrators. In this paper it has been shown that the refrigerants R11, R12, R113 and R114 can be satisfactorily used as working fluids in CPC collector systems. By using these working fluids, overall conversion efficiency of 9% can be achieved. Other refrigerants R12, B1, R22, R500, R502, R115 and C318 are found not to be suitable as they produce very low overall conversion efficiencies. In order to produce 20 kW of electricity at 1000 W/m² insolation about 920 truncated CPC collectors (2 m length, 0.15 m aperture) with a concentration ratio of 8 are required. This minimum number of collectors would be required at an overall conversion efficiency of 9%.