Ovarian aging and hormone replacement therapy. Hormonal levels, symptoms, and attitudes of African-American and white women

The purpose of the study was to identify psychiatric symptoms, neurological impairments, and situational factors associated with the emergence of violence and with its persistence. Psychiatric symptoms were assessed in newly admitted physically assaultive psychiatric patients and nonviolent controls. Patients were than evaluated for 4 weeks to determine the persistence or resolution of these physical assaults. Patients who showed marked resolution of assaults were classified as transiently violent (n = 41), and those who remained assaultive throughout were categorized as persistently violent (n = 34). At the end of 4 weeks, all patients received a comprehensive psychiatric and neurological assessment. Physical assaults were associated initially with prominent positive psychotic symptoms. Both transiently and persistently violent patients were more psychotic than the nonviolent controls; however transiently violent patients showed better resolution of these symptoms over the 4 weeks. They also evidenced less frontal lobe impairment on the neurological examination than the persistently violent patients. The two violent groups differed in their susceptibility to environmental influences: the surrounding ward agitation fostered physical assaults in transiently but not in persistently violent patients. This differentiation between transiently and persistently violent patients has major implications for the comprehensive treatment of violent behavior.     

Hydride Vapor Phase Epitaxy of GaN Thick Films by the Consecutive Deposition Process Using GaCl3

GaN buffer and main layers were grown by the conventional hydride vapor phase epitaxy technique using GaCl₃ consecutively. The deposited buffer layers were investigated by atomic force microscopy and X-ray analysis. To examine the behavior of the buffer layers at main layer growth temperature, heat treatment was conducted at 900°C. Based on the results of the buffer layer study, GaN thick films were grown at 1050°C. Optimum deposition conditions of buffer layer from the buffer and main layer studies generally coincided. On the φ scanning pattern, the GaN films grown on (0001) Al₂O₃ were single-crystalline. Band-edge emission dominated photoluminescence was observed at room temperature.     

A new design method for prestressed concrete continuous flat slabs

This paper presents a simple but relatively accurate procedure for the analysis of unbonded prestressed continuous flat slabs. Bi‐circular curves instead of conventional parabolic ones are introduced to obtain the characteristic parameters of the curved tendon profiles. Based on the proposed tendon profile and theory of thin plates, a series of simple formulae are derived to compute the bending moments of flat slabs. The validity of the proposed method is demonstrated by comparing the results with those obtained from finite element analysis. The results of the analysis presented in this paper indicate that the proposed method turns out to be convenient and reasonably accurate in the analysis of prestressed flat slabs. Copyright © 2004 John Wiley & Sons, Ltd.     

Analysis of the detectivity for triple-layer heterojunction GaSb/GaInAsSb infrared detectors

In this paper, the detectivity is calculated and analyzed with the front-or backside illuminated case for both N-GaSb/p₂-Ga_0.8In_0.2As_0.19Sb_0.81/p₁-Ga_0.9In_0.1As_0.09Sb_0.91 and N₁-GaSb/n₂-Ga_0.9In_0.1As_0.09Sb_0.91/p-Ga_0.8In_0.2As_0.19Sb_0.81 infrared photovoltaic detectors, respectively. The analysis results show that the main absorption appears in the p-type Ga_0.8In_0.2As_0.19Sb_0.81 material with either front- or backside illuminated case for above two structures. In each structure, the carrier concentration obviously affects the detectivity. The carrier concentration in the wide-bandgap material for the isotype heterojunction should be reduced as low as possible to reduce the tunneling rate at the isotype heterointerface. Moreover, the change of the detectivity with the p-side surface recombination velocity for the N₁-n₂-p structure is more sensitive than that with the p₁-side surface recombination velocity for the N-p₂-p₁ structure. In the N-p₂-p₁ structure with the incident light from the p₁-side surface, two-color detection is achieved.     

Droplet de-entrainment by inertial impaction on vertical rods in an air-droplet mixture flow

We experimentally investigate the de-entrainment of droplets by inertial impaction on an array of vertical rods in an air-droplet mixture flow. The de-entrainment efficiencies are measured for a single rod, for a single row of rods, and for a multi-row of rods. We investigate the effects of the droplet mass flux (0.5–5.4 kg/m² s), the droplet Weber number (3000–8000), the air velocity (0–6 m/s), the rod geometry, and the surface roughness on the de-entrainment, and the rod diameter-to-pitch ratio effect on the de-entrainment. The results for a single rod show that the de-entrainment efficiency decreases slightly as the droplet mass flux increases; however, in our experimental ranges, there is negligible dependence on the droplet Weber number, the air velocity, and the surface roughness. The rod geometry affects the de-entrainment efficiency. The results for a single row of rods show that the existence of neighboring rods promotes de-entrainment due to droplet splashing, and we develop a correlation to show the effect of diameter-to-pitch ratio on the de-entrainment. Using information on the de-entrainment efficiencies of a single rod and those of a single row of rods, we propose a correlation that predicts the de-entrainment efficiency for a multi-row of rods with a staggered array. The RMS errors of the correlation from the de-entrainment efficiencies experimentally obtained are within 13.5%.     

Experimental observations on flow characteristics in an open two-phase natural circulation loop

The flow behavior in an open two-phase natural circulation loop was studied experimentally using Freon-113. The heat flux, inlet- and exit-restrictions, liquid charging level and inlet subcooling were taken as parameters. As a result, three basic circulation modes were observed with variation of the heat flux: periodic circulation (A), continuous circulation, and periodic circulation (B). Of these modes, only the continuous circulation mode was stable and the maximum circulation rate appeared with this mode. An increase in the inlet-restriction and/or decrease in the exit-restriction broadened the range of the continuous circulation mode and stabilized the system. When the liquid charging level was lowered or the inlet subcooling was decreased, the continuous circulation mode started at a lower heat flux and the system became stable. The results are summarized on instability maps in the plane of heat flux vs. inlet subcooling.     

Decision-directed maximum-likelihood estimation of OFDM framesynchronisation offset

The authors propose a method to estimate the synchronisation offset for orthogonal frequency division multiplexing (OFDM) frame alignment without resort to pilot tones. A decision-directed maximum-likelihood estimation of frame synchronisation offset is derived, and the performance of the proposed scheme is confirmed by computer simulation for QAM systems