CDMA Mobile System Testbed and Field Test

This paper briefly explains the configuration of CDMA Mobile System (CMS) test bed. The measured fading and delay results of CDMA signal in Taejon area are shown. In comparison to other cellular systems, there are more parameters in the CDMA systems that affect system performance and capacity. We performed the optimization test of the selected parameters and present the effect of each parameter on the performance. This paper presents the capacity and performance test results of CMS. The capacity test was performed on ETRI site of three sectors in Taejon area. The performance tests include call completion rate, busy hour call attempt, and the delay characteristics of voice.     

Nonfullerene Electron Transporting Material Based on Naphthalene Diimide Small Molecule for Highly Stable Perovskite Solar Cells with Efficiency Exceeding 20%

This study reports a new nonfullerene electron transporting material (ETM) based on naphthalene diimide (NDI) small molecules for use in high‐performance perovskite solar cells (PSCs). These solar cells simultaneously achieve high power conversion efficiency (PCE) of over 20% and long‐term stability. New NDI‐ID (N,N′‐Bis(1‐indanyl)naphthalene‐1,4,5,8‐tetracarboxylic diimide) consisting of an N‐substituted indane group having simultaneous alicyclic and aromatic characteristics is synthesized by a low‐cost, one‐step reaction, and facile purification method. The partially flexible characteristics of an alicyclic cyclopentene group on indane groups open the possibility of low‐temperature solution processing. The conformational rigidity and aromaticity of phenyl and alicyclic groups contribute to high temporal stability by strong secondary bonds. NDI‐ID has herringbone packed semiconducting NDI cores that exhibit up to 0.2 cm² V^?1 s^?1 electron mobility in field effect transistors. The inverted PSCs based on CH(NH₂)₂PbI_3–xBr_x with NDI‐ID ETM exhibit very high PCEs of up to 20.2%, which is better than that of widely used PCBM (phenyl‐C61‐butyric acid methyl ester) ETM‐based PSCs. Moreover, NDI‐ID‐based PSCs exhibit very high long‐term temporal stability, retaining 90% of the initial PCE after 500 h at 100 °C with 1 sun illumination without encapsulation. Therefore, NDI‐ID is a promising ETM for highly efficient, stable PSCs.     

In Vivo Photoacoustic Imaging of Livers Using Biodegradable Hyaluronic Acid‐Conjugated Silica Nanoparticles

The diagnosis of liver diseases is generally carried out via ultrasound imaging, computed tomography, and magnetic resonance imaging. The emerging photoacoustic imaging is an attractive alternative to diagnose even early stage of liver diseases providing high‐resolution anatomical and functional information in deep tissue noninvasively. However, the liver has insufficient photoacoustic contrast due to low optical absorbance in the near‐infrared windows. Here, a new hyaluronate–silica nanoparticle (HA–SiNP) conjugate for liver‐specific delivery and imaging for the diagnosis of liver diseases is developed. The HA–SiNP conjugates show high liver‐specific targeting efficiency, strong optical absorbance near‐infrared windows, excellent biocompatibility, and biodegradability. The liver‐specific targeting efficiency is verified by in vitro cellular uptake test, and in vivo and ex vivo photoacoustic imaging. In vivo photoacoustic imaging shows that photoacoustic amplitude in the liver injected with HA–SiNP conjugates is 4.4 times higher than that of the liver injected with SiNP. The biocompatibility and biodegradability of HA–SiNP conjugates are verified by cell viability test, optical spectrum analysis of urine, and inductively coupled plasma‐mass spectroscopy (ICP‐MS) analysis. Taken together, HA–SiNP conjugates may be developed as a promising liver targeted photoacoustic imaging contrast agent and liver‐targeted drug delivery agent.     

Collectively Exhaustive Electrodes Based on Covalent Organic Framework and Antagonistic Co‐Doping for Electroactive Ionic Artificial Muscles

In this study, high‐performance ionic soft actuators are developed for the first time using collectively exhaustive boron and sulfur co‐doped porous carbon electrodes (BS‐COF‐Cs), derived from thiophene‐based boronate‐linked covalent organic framework (T‐COF) as a template. The one‐electron deficiency of boron compared to carbon leads to the generation of hole charge carriers, while sulfur, owing to its high electron density, creates electron carriers in BS‐COF‐C electrodes. This antagonistic functionality of BS‐COF‐C electrodes assists the charge‐transfer rate, leading to fast charge separation in the developed ionic soft actuator under alternating current input signals. Furthermore, the hierarchical porosity, high surface area, and synergistic effect of co‐doping of the BS‐COF‐Cs play crucial roles in offering effective interaction of BS‐COF‐Cs with poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS), leading to the generation of high electro‐chemo‐mechanical performance of the corresponding composite electrodes. Finally, the developed ionic soft actuator based on the BS‐COF‐C electrode exhibits large bending strain (0.62%), excellent durability (90% retention for 6 hours under operation), and 2.7 times higher bending displacement than PEDOT:PSS under extremely low harmonic input of 0.5 V. This study reveals that the antagonistic functionality of heteroatom co‐doped electrodes plays a crucial role in accelerating the actuation performance of ionic artificial muscles.     

Sub‐5 nm Dendrimer Directed Self‐Assembly with Large‐Area Uniform Alignment by Graphoepitaxy

Directed self‐assembly (DSA) using soft materials is an important method for producing periodic nanostructures because it is a simple, cost‐effective process for fabricating high‐resolution patterns. Most of the previously reported DSA methods exploit the self‐assembly of block copolymers, which generates a wide range of nanostructures. In this study, cylinders obtained from supramolecular dendrimer films with a high resolution (<5 nm) exhibit planar ordering over a macroscopic area via guiding topographical templates with a high aspect ratio (>10) and high spatial resolution (≈20 nm) of guiding line patterns. Theoretical and experimental studies reveal that this property is related to geometrical anchoring on the meniscus region and physical surface anchoring on the sidewall. Furthermore, this DSA of dendrimer cylinders is demonstrated by the non‐regular geometry of the patterned template. The macroscopic planar alignment of the dendrimer nanostructure reveals an extremely small feature size (≈4.7 nm) on the wafer scale (>16 cm²). This study is expected to open avenues for the production of a large family of supramolecular dendrimers with different phases and feature dimensions oriented by the DSA approach.     

A 44-GHz monolithic waveguide plane-wave amplifier with improvedunit cell design [using pHEMTs]

A 44-GHz monolithic waveguide plane-wave amplifier (PWA) with improved unit cell design is presented in this paper. The unit cell is a two-stage direct-coupled design and satisfies size, bistability, and stability requirements of the waveguide PWA. The ultra-compact unit cell had a cell size of 0.8 mm², and showed a small-signal gain of 8 dB and an output power of 15 dBm at 44 GHz with a corresponding dc-to-RF efficiency of 10%. A monolithic waveguide PWA using these unit cells showed a “flange-to-flange” gain of 5 dB, an output power of 0.3 W, and an efficiency of 2% at 44 GHz     

Reversible energy recovery logic circuit without non-adiabaticenergy loss

The authors propose a reversible energy recovery logic (RERL) circuit for ultra-low-energy consumption, which consumes only adiabatic energy loss and leakage current loss by completely eliminating non-adiabatic energy loss. It is a dual-rail adiabatic circuit using the concept of reversible logic with a new eight-phase clocking scheme. Simulation results show that at low-speed operation, the RERL consumes much less energy than the complementary static CMOS circuit and other adiabatic logic circuits     

Interdiffusion behavior of Hg in HgTe/CdTe superlattices grown on Cd0.96Zn0.04 Te (211)B substrates by molecular beam epitaxy

Double-crystal x-ray rocking curve (DCRC) and secondary-ion mass-spectroscopy (SIMS) measurements have been performed to investigate the effect of rapid thermal annealing on the interdiffusion behavior of Hg in HgTe/CdTe superlattices grown on Cd_0.96Zn_0.04Te (211)B substrates by molecular beam epitaxy. The sharp satellite peaks of the DCRC measurements on a 100-period HgTe/CdTe (100Å/100Å) superlattice show a periodic arrangement of the superlattice with high-quality interfaces. The negative direction of the entropy change obtained from the diffusion coefficients as a function of the reciprocal of the temperature after RTA indicates that the Hg diffusion for the annealed HgTe/CdTe superlattice is caused by an interstitial mechanism. The Cd and the Hg concentration profiles near the annealed HgTe/CdTe superlattice interfaces, as measured by SIMS, show a nonlinear behavior for Hg, originating from the interstitial diffusion mechanism of the Hg composition. These results indicate that a nonlinear interdiffusion behavior is dominant for HgTe/CdTe superlattices annealed at 190°C and that the rectangular shape of HgTe/CdTe superlattices may change to a parabolic shape because of the intermixing of Hg and Cd due to the thermal treatment.