Supramolecular Order of Solution‐Processed Perylenediimide Thin Films: High‐Performance Small‐Channel n‐Type Organic Transistors

N,N′‐1H,1H‐perfluorobutyl dicyanoperylenecarboxydiimide (PDIF‐CN₂), a soluble and air stable n‐type molecule, undergoes significant reorganization upon thermal annealing after solution deposition on several substrates with different surface energies. Interestingly, this system exhibits an exceptional edge‐on orientation regardless of the substrate chemistry. This preferential orientation is rationalized in terms of strong intermolecular interactions between the PDIF‐CN₂ molecules. The presence of a pronounced π–π stacking is confirmed by combining near‐edge X‐ray absorption fine structure spectroscopy (NEXAFS), dynamic scanning force microscopy (SFM) and surface energy measurements. The remarkable charge carrier mobility measured in field‐effect transistors, using both bottom‐ and top‐contact (bottom‐gate) configurations, underlines the importance of strong intermolecular interactions for the realization of high performing devices.     

Improving satellite services with cooperative communications

This paper proposes new transmission schemes for the delivery of satellite services. In the proposed scenarios, mobile terminals are allowed to forward the signal received from the satellite. This scheme provides spatial diversity just like MIMO transmission schemes. Moreover, the coverage area is extended because masked terminals have an additional opportunity to get the service from neighboring terminals. We use the paradigm of cooperative communications to compare the advantages and limitations of several scenarios in hybrid terrestrial/satellite systems. In particular, we study the following basic transmission scheme: in a first time slot, the satellite sends its signal and, in a second time slot, mobile terrestrial terminals are relaying the satellite signal. An analysis framework is proposed and applied to this cooperation scenario at the destination terminal. The framework is modeling the cooperation process and clearly separates the control part from the data user part. The paper outlines the importance of the control part by evaluating the relay selection policy on a basic hybrid satellite/ad hoc system. Copyright © 2011 John Wiley & Sons, Ltd.     

Highly Efficient Video Codec for Entertainment‐Quality

We present a novel video codec for supporting entertainment‐quality video. It has new coding tools such as an intra prediction with offset, integer sine transform, and enhanced block‐based adaptive loop filter. These tools are used adaptively in the processing of intra prediction, transform, and loop filtering. In our experiments, the proposed codec achieved an average reduction of 13.35% in BD‐rate relative to H.264/AVC for 720p sequences.     

Intratumoral Thermal Reading During Photo‐Thermal Therapy by Multifunctional Fluorescent Nanoparticles

The tremendous development of nanotechnology is bringing us closer to the dream of clinical application of nanoparticles in photothermal therapies of tumors. This requires the use of specific nanoparticles that must be highly biocompatible, efficient light‐to‐heat converters and fluorescent markers. Temperature reading by the heating nanoparticles during therapy appears of paramount importance to keep at a minimum the collateral damage that could arise from undesirable excessive heating. In this work, this thermally controlled therapy is possible by using Nd³⁺ ion‐doped LaF₃ nanocrystals. Because of the particular optical features of Nd³⁺ ions at high doping concentrations, these nanoparticles are capable of in vivo photothermal heating, fluorescent tumor localization and intratumoral thermal sensing. The successful photothermal therapy experiments here presented highlight the importance of controlling therapy parameters based on intratumoral temperature measurements instead of on the traditionally used skin temperature measurements. In fact, significant differences between intratumoral and skin temperatures do exist and could lead to the appearance of excessive collateral damage. These results open a new avenue for the real application of nano­particle‐based photothermal therapy at clinical level.     

Widely Tunable Morphologies in Block Copolymer Thin Films Through Solvent Vapor Annealing Using Mixtures of Selective Solvents

Thin films of block copolymers are extremely attractive for nanofabrication because of their ability to form uniform and periodic nanoscale structures by microphase separation. One shortcoming of this approach is that to date the design of a desired equilibrium structure requires synthesis of a block copolymer de novo within the corresponding volume ratio of the blocks. In this work, solvent vapor annealing in supported thin films of poly(2‐hydroxyethyl methacrylate)‐block‐poly(methyl methacrylate) [PHEMA‐b‐PMMA] by means of grazing incidence small angle X‐ray scattering (GISAXS) is investigated. A spin‐coated thin film of a lamellar block copolymer is solvent vapor annealed to induce microphase separation and improve the long‐range order of the self‐assembled pattern. Annealing in a mixture of solvent vapors using a controlled volume ratio of solvents, which are chosen to be preferential for each block, enables selective formation of ordered lamellae, gyroid, hexagonal, or spherical morphologies from a single‐block copolymer with a fixed volume fraction. The selected microstructure is then kinetically trapped in the dry film by rapid drying. This paper describes what is thought to be the first reported case where in situ methods are used to study the transition of block copolymer films from one initial disordered morphology to four different ordered morphologies, covering much of the theoretical diblock copolymer phase diagram.     

Metallic Glass as a Mechanical Material for Microscanners

Microelectromechanical system (MEMS) actuators essentially have movable silicon structures where the mechanical motion can be activated electronically. The microscanner is one of the most successfully commercialized MEMS devices which are widely used for collecting optical information, manipulating light, and displaying images. While silicon is abundant, it is also brittle and stiff and when microprocessed, defects are not uncommon. These defects result in weakness under torsional stress and this has been the key factor limiting the scanning performance of the microscanner. Here a metallic glass (MG)‐based microscanner is reported with MG as the material for the moving torsion bars. The low elastic modulus, high fracture toughness, and high strength of MG offers, for the first time, an ultralarge rotating angle of 146° with power consumption lowered to the microwatt range, and a smaller driving force and better actuation performance, than conventional single crystal silicon and polycrystalline silicon. The high spatial resolution and large scanning field of the MG‐based microscanner are demonstrated in the tomographic imaging of a human finger. This development of an MG‐based MEMS possibly opens a new field of low‐powered MEMS devices with extreme actuation and enhanced sensing.     

Hetero‐Nanonet Rechargeable Paper Batteries: Toward Ultrahigh Energy Density and Origami Foldability

Forthcoming smart energy era is in strong pursuit of full‐fledged rechargeable power sources with reliable electrochemical performances and shape versatility. Here, as a naturally abundant/environmentally friendly cellulose‐mediated cell architecture strategy to address this challenging issue, a new class of hetero‐nanonet (HN) paper batteries based on 1D building blocks of cellulose nanofibrils (CNFs)/multiwall carbon nanotubes (MWNTs) is demonstrated. The HN paper batteries consist of CNF/MWNT‐intermingled heteronets embracing electrode active powders (CM electrodes) and microporous CNF separator membranes. The CNF/MWNT heteronet‐mediated material/structural uniqueness enables the construction of 3D bicontinuous electron/ion transport pathways in the CM electrodes, thus facilitating electrochemical reaction kinetics. Furthermore, the metallic current collectors‐free, CNF/MWNT heteronet architecture allows multiple stacking of CM electrodes in series, eventually leading to user‐tailored, ultrathick (i.e., high‐mass loading) electrodes far beyond those accessible with conventional battery technologies. Notably, the HN battery (multistacked LiNi_0.5Mn_1.5O₄ (cathode)/multistacked graphite (anode)) provides exceptionally high‐energy density (=226 Wh kg^?1 per cell at 400 W kg^?1 per cell), which surpasses the target value (=200 Wh kg^?1 at 400 W kg^?1) of long‐range (=300 miles) electric vehicle batteries. In addition, the heteronet‐enabled mechanical compliance of CM electrodes, in combination with readily deformable CNF separators, allows the fabrication of paper crane batteries via origami folding technique.     

HV‐SoP Technology for Maskless Fine‐Pitch Bumping Process

Recently, we have witnessed the gradual miniaturization of electronic devices. In miniaturized devices, flip‐chip bonding has become a necessity over other bonding methods. For the electrical connections in miniaturized devices, fine‐pitch solder bumping has been widely studied. In this study, high‐volume solder‐on‐pad (HV‐SoP) technology was developed using a novel maskless printing method. For the new SoP process, we used a special material called a solder bump maker (SBM). Using an SBM, which consists of resin and solder powder, uniform bumps can easily be made without a mask. To optimize the height of solder bumps, various conditions such as the mask design, oxygen concentration, and processing method are controlled. In this study, a double printing method, which is a modification of a general single printing method, is suggested. The average, maximum, and minimum obtained heights of solder bumps are 28.3 μm, 31.7 μm, and 26.3 μm, respectively. It is expected that the HV‐SoP process will reduce the costs for solder bumping and will be used for electrical interconnections in fine‐pitch flip‐chip bonding.     

Mobile Small Cells for Further Enhanced 5G Heterogeneous Networks

A heterogeneous network (HetNet) is a network topology composed by deploying multiple HetNets under the coverage of macro cells (MCs). It can improve network throughput, extend cell coverage, and offload network traffic; for example, the network traffic of a 5G mobile communications network. A HetNet involves a mix of radio technologies and various cell types working together seamlessly. In a HetNet, coordination between MCs and small cells (SCs) has a positive impact on the performance of the networks contained within, and consequently on the overall user experience. Therefore, to improve user‐perceived service quality, HetNets require high‐efficiency network protocols and enhanced radio technologies. In this paper, we introduce a 5G HetNet comprised of MCs and both fixed and mobile SCs (mSCs). The featured mSCs can be mounted on a car, bus, or train and have different characteristics to fixed SCs (fSCs). In this paper, we address the technical challenges related to mSCs. In addition, we analyze the network performance under two HetNet scenarios — MCs and fSCs, and MCs and mSCs.