Noise contribution of the body resistance in partially-depleted SOIMOSFETs

An additional noise component is observed in the noise spectrum of transistors in a partially-depleted (PD) medium-thickness SOI-CMOS technology. We identify the origin of this additional noise in the noisy resistance of the body film. This resistance, coupled to the gate capacitance, forms an RC filter and generates the hump-shape of the additional noise component. Several experimental observations that support this model are presented     

The meta-stable dip (MSD) effect in SOI FinFETs

The meta-stable dip (MSD) effect is demonstrated and characterized in SOI FinFETs. With ascending scan of front-gate voltage (V_G1), the magnitude of drain current (I_D) tends to be fixed within a specific region of the front-gate voltage and this leads to a dip of transconductance (g_m). The dip width can be modulated through a control of bias condition or measurement speed such as back-gate voltage (V_G2), drain voltage (V_D) and step size of the front-gate voltage. From the dual-gate transient measurement, it is found that the MSD effect is highly dependent on the floating-body effect. In SOI FinFETs, the MSD effect is significantly affected by the fin width due to the fringing electric field of the lateral gates.     

Special mechanisms in thin-film SOI MOSFETs

The main special mechanisms that govern the operation of thin-film SOI MOSFETs are reviewed. The influence of the most important technological and electrical parameters, e.g. the film and buried oxide thicknesses, film and silicon substrate doping, channel length, substrate bias, and interface defects, is discussed. The electrical properties of fully depleted thin-film SOI MOS transistors are improved, especially the driving current and the subthreshold swing. We address the advantages of thin-film SOI devices in relation to scaling rules down to deep submicron transistors, as well as the main parasitic phenomena, e.g. the kink, latch, breakdown, self-heating and hot-carrier degradation effects. Finally, the low temperature properties and potential quantum effects are outlined.     

A comparison of MOSFETs aging under d.c., a.c. and alternating stress conditions

The effects of static, alternating and dynamic stress conditions on the degradation rate of 0.8μm n- and p-channel LDD MOS transistors have systematically been investigated and compared. The shifts of the threshold voltage, transconductance, linear drain current and charge pumping current were used to monitor the transistor degradation. The results suggest that the aging induced by a dynamic stress cannot be directly explained with static stress models, essentially because it is highly dependent on a larger number of parameters (biases and durations of the top and bottom levels of the pulses, transient times). The correlation of static and dynamic stresses also clarifies the degradation mechanisms, in particular the role of hot holes in the generation of interface states.     

Correlation of the leakage current and charge pumping in silicon oninsulator gate-controlled diodes

The leakage and charge pumping currents were measured in gate-controlled MOS p-i-n diodes fabricated on thin SIMOX substrates. The efficiencies of the techniques as well as their complementary features are analyzed for various experimental conditions. The interface properties of device-grade SIMOX wafers are characterized and shown to be compatible with VLSI requirements. Special interface coupling effects, which occur only in fully depleted SOI devices and modify the conventional signature of charge pumping and leakage current, are thoroughly investigated     

Pullulan: A versatile coating agent for superparamagnetic iron oxide nanoparticles

Ultrasmall superparamagnetic iron oxide (Fe₃O₄) nanoparticles coated by biocompatible pullulan (Pu‐USPIO) with sizes below 10 nm and having a magnetite core and a hydrophilic outer shell of pullulan were prepared. The formed Pu‐USPIOs were thoroughly characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, atomic force microscopy, and small‐angle X‐ray scattering experiments. The content of magnetic nanoparticles embedded into the pullulan matrix was determined by thermogravimetric analysis. Vibrating sample magnetometry analysis was used to evaluate the magnetic properties of the Pu‐USPIO samples. Because of the presence of pullulan, these nanoparticles could be conditioned in many versatile forms, from a clear solution to magnetic films, for potential applications, including magnetic hyperthermia mediators. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42926.     

Vertically oriented nickel nanorod/carbon nanofiber core/shell structures synthesized by plasma-enhanced chemical vapor deposition

Plasma-enhanced chemical vapor deposition, without a nickel-containing gaseous precursor, was used to synthesize continuous nickel (Ni) nanorods inside the hollow cavity of carbon nanofibers (CNFs), thus forming vertically aligned Ni/CNF core/shell structures. Scanning and transmission electron microscopic images indicate that the elongated Ni nanorods originate from the catalyst particles at the tips of the CNFs and that their formation is due to the effect of extrusion induced by the compressive force of the graphene layers during growth. Different from previous work, each vertically-aligned core/shell structure reported is totally isolated from its neighbors. Continuous Ni nanorods are found to separate into smaller ones with increasing growth time, which was ascribed to (i) the limited amount of Ni available in the tip of the CNF, (ii) the polycrystalline nature of the Ni nanorods and (iii) the combined effects of the compressive stresses on the side of the Ni nanorods and of the tensile stress along their axis.     

A review of biodiesel production by integrated reactive separation technologies

Biodiesel is a biodegradable and renewable fuel, emerging as a viable alternative to petroleum diesel. Conventional biodiesel processes still suffer from problems associated with the use of homogeneous catalysts and the limitations imposed by the chemical reaction equilibrium, thus leading to severe economic and environmental penalties. This work provides a detailed review—illustrated with relevant examples—of novel reactive separation technologies used in biodiesel production: reactive distillation/absorption/extraction, and membrane reactors. Reactive separation offers new and exciting opportunities for manufacturing the fatty acid alkyl esters involved in the industrial production of biodiesel and specialty chemicals. The integration of reaction and separation into one operating unit overcomes equilibrium limitations and provides major benefits such as low capital investment and operating costs. These reactive separation processes can be further enhanced by heat‐integration and powered by heterogeneous catalysts, to eliminate all conventional catalyst related operations, using efficiently the raw materials and the reaction volume, while offering higher conversion and selectivity, as well as significant energy savings compared with conventional biodiesel processes. Remarkable, in spite of the high degree of integration, such integrated reactive‐separation processes are still very well controllable as illustrated by the included examples. Copyright © 2012 Society of Chemical Industry     

Development and characterisation of microporous biomimetic scaffolds loaded with magnetic nanoparticles as bone repairing material

Fine-tuning of the scaffolds structural features for bone tissue engineering can be an efficient approach to regulate the specific response of the osteoblasts. Here, we loaded magnetic nanoparticles aka superparamagnetic iron oxide nanoparticles (SPIONs) into 3D composite scaffolds based on biological macromolecules (chitosan, collagen, hyaluronic acid) and calcium phosphates for potential applications in bone regeneration, using a biomimetic approach. We assessed the effects of organic (chitosan/collagen/hyaluronic acid) and inorganic (calcium phosphates, SPIONs) phase over the final features of the magnetic scaffolds (MS). Mechanical properties, magnetic susceptibility and biological fluids retention are strongly dependent on the final composition of MS and within the recommended range for application in bone regeneration. The MS architecture/pore size can be made bespoken through changes of the final organic/inorganic ratio. The scaffolds undertake mild degradation as the presence of inorganic components hinders the enzyme catalytic activity. In vitro studies indicated that osteoblasts (SaOS-2) on MS9 had similar cell behaviour activity in comparison with the TCP control. In vivo data showed an evident development of integration and resorption of the MS composites with low inflammation activity. Current findings suggest that the combination of SPIONs into 3D composite scaffolds can be a promising toolkit for bone regeneration.