Synthesis of a new oxazoline macromonomer for dispersion polymerization

We synthesized new macromonomers containing vinylsilane moiety by cationic ring-opening polymerization of 2-ethyl-2-oxazoline. Kinetic studies proved that initiation with vinylsilane derivative, bearing chloride counterion, is a fast process followed by a slow propagation and absence of termination. We used the dispersion polymerization of styrene as test for the stabilizing efficiency of the newly synthesized macromonomer. The dispersion polymerization tests allowed the investigation of the effect of the macromonomer concentration on the number average diameter of the prepared polystyrene microspheres and its polydispersity index. In addition, we compared the stabilizing efficiency of commercial poly(N-vinylpyrollidone) with that of our macromonomer. Copolymerization of styrene with 10 wt% oxazoline macromonomer yielded stable and monodisperse microspheres, having the number average diameter of 1.8 μm and a good size polydispersity index of 1.05.     

Influence of sodium dodecyl sulfate and cetyl trimethylammonium bromide upon calcium carbonate precipitation on bacterial cellulose

Calcium carbonate was deposed on bacterial cellulose (BC) never-dried membranes in the presence of different concentrations of sodium dodecyl sulfate (SDS) and cetyl trimethylammonium bromide (CTAB) by a precipitation reaction between aqueous solutions of calcium chloride (CaCl₂) and sodium carbonate (Na₂CO₃) containing, or not, surfactant in their composition. Different shapes of crystals were obtained from rhombohedral ones to flowerlike, depending on surfactant type and concentration. From the two surfactants tested, SDS has a greater influence on calcium carbonate morphology than CTAB. The only polymorph obtained in all studied cases was calcite. The composite films BC-calcite were characterized by means of scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and color measurements. The obtained BC-calcium carbonate composites could be used in paper manufacturing.     

Atmospheric pressure plasma enhanced synthesis of flame retardant cellulosic materials

Flame retardant cellulosic materials have been produced using a silicon dioxide (SiO₂) network coating. SiO₂ network armor was prepared through hydrolysis and condensation of the precursor tetraethyl orthosilicate (TEOS), prior coating the substrates, and was cross linked on the surface of the substrates using atmospheric pressure plasma (APP) technique. Because of protection effects of the SiO₂ network armor, the cellulosic based fibers exhibit enhanced thermal properties (characterized by TGA and DSC) and improved flame retardant (proven by ASTM D1230‐99). Furthermore, the surface analysis (XPS and SEM) confirmed the presence of the SiO₂ network attached to the substrates even after intense ultrasound washes. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Screening of Molecular Virulence Markers in Staphylococcus aureus and Pseudomonas aeruginosa Strains Isolated from Clinical Infections

Staphylococcus (S.) aureus and Pseudomonas (Ps.) aeruginosa are two of the most frequently opportunistic pathogens isolated in nosocomial infections, responsible for severe infections in immunocompromised hosts. The frequent emergence of antibiotic-resistant S. aureus and Ps. aeruginosa strains has determined the development of new strategies in order to elucidate the different mechanisms used by these bacteria at different stages of the infectious process, providing the scientists with new procedures for preventing, or at least improving, the control of S. aureus and Ps. aeruginosa infections. The purpose of this study was to characterize the molecular markers of virulence in S. aureus and Ps. aeruginosa strains isolated from different clinical specimens. We used multiplex and uniplex PCR assays to detect the genes encoding different cell-wall associated and extracellular virulence factors, in order to evaluate potential associations between the presence of putative virulence genes and the outcome of infections caused by these bacteria. Our results demonstrate that all the studied S. aureus and Ps. aeruginosa strains synthesize the majority of the investigated virulence determinants, probably responsible for different types of infections.     

Plasma‐enhanced deposition of silver nanoparticles onto polymer and metal surfaces for the generation of antimicrobial characteristics

Silver nanoparticle thin layers were deposited onto formaldehyde‐radio frequency (RF)‐plasma‐functionalized medical‐ and food‐grade silicone rubber, stainless steel, and paper surfaces. The silver deposition was carried out under ex situ plasma conditions using the Tollen's reaction. Results from survey and high‐resolution electron spectroscopy for chemical analysis, scanning electron microscopy (SEM), atomic force microscopy (AFM), and energy dispersive X‐ray spectroscopy investigations confirmed the presence of thin silver layers on the plasma‐exposed and subsequently modified substrate surfaces. In addition, SEM and AFM demonstrated the nanoparticle‐based morphology of the deposited layers. Our results showed that thin macromolecular layers bearing aldehyde functionalities can be deposited onto silicone rubber, stainless steel, and paper surfaces. The bactericidal properties of the silver‐coated surfaces were demonstrated by exposing them to Listeria monocytogenes. No viable bacteria were detected after 12 to 18 h on silver‐coated silicone rubber surfaces. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1411–1422, 2004     

Spatial Stress and Strain Distributions of Viscoelastic Layers in Oscillatory Shear

One of the standard experimental probes of a viscoelastic material is to measure the response of a layer trapped between parallel surfaces, imposing either periodic stress or strain at one boundary and measuring the other. The relative phase between stress and strain yields solid-like and liquid-like properties, called the storage and loss moduli, respectively, which are then captured over a range of imposed frequencies. Rarely are the full spatial distributions of shear and normal stresses considered, primarily because they cannot be measured except at boundaries and the information was not deemed of particular interest in theoretical studies. Likewise, strain distributions throughout the layer were traditionally ignored except in a classical protocol of Ferry, Adler and Sawyer, based on snapshots of standing shear waves. Recent investigations of thin lung mucus layers exposed to oscillatory stress (breathing) and strain (coordinated cilia), however, suggest that the wide range of healthy conditions and environmental or disease assaults lead to conditions that are quite disparate from the "surface loading" and "gap loading" conditions that characterize classical rheometers. In this article, we extend our previous linear and nonlinear models of boundary stresses in controlled oscillatory strain to the entire layer. To illustrate non-intuitive heterogeneous responses, we characterize experimental conditions and material parameter ranges where the maximum stresses migrate into the channel interior.     

Generation of antifouling layers on stainless steel surfaces by plasma‐enhanced crosslinking of polyethylene glycol

Polyethylene glycol (PEG) structures were deposited onto stainless steel (SS) surfaces by spin coating and argon radio frequency (RF)‐plasma mediated crosslinking. Electron spectroscopy for chemical analysis (ESCA) and attenuated total reflectance Fourier transform infrared spectroscopy (ATR‐FTIR) indicated the presence of  CH₂ CH₂ O structure and C C C linkage, as a result of the plasma crosslinking, on PEG‐modified SS surfaces. Scanning electron microscopy (SEM) indicated complete deposition, and water contact angle analysis revealed higher hydrophilicity on PEG‐modified surfaces compared to unmodified SS surfaces. Surface morphology and roughness analysis by atomic force microscopy (AFM) revealed smoother SS surfaces after PEG modification. The evaluation of antifouling ability of the PEG‐modified SS surfaces was carried out. Compared to the unmodified SS, PEG‐modified surfaces showed about 81–96% decrease in Listeria monocytogenes attachment and biofilm formation (p < 0.05). This cold plasma mediated PEG crosslinking provided a promising technique to reduce bacterial contamination on surfaces encountered in food‐processing environments. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 485–497, 2005     

Scandium Recovery from Aqueous Solution by Adsorption Processes in Low-Temperature-Activated Alumina Products

In this paper, we studied the scandium adsorption from aqueous solutions on the surface of low-temperature-activated alumina products (GDAH). The GDAH samples are industrially manufactured, coming from the Bayer production cycle of the Sierra Leone bauxite as aluminium hydroxide, and further, by drying, milling, classifying and thermally treating up to dehydroxilated alumina products at low temperature. All experiments related to hydroxide aluminium activation were conducted at temperature values of 260, 300 and 400 °C on samples having the following particle sizes: <10 µm, 20 µm, <45 µm and <150 µm, respectively. The low-temperature-activated alumina products were characterised, and the results were published in our previous papers. In this paper, we studied the scandium adsorption process on the above materials and related thermodynamic and kinetic studies.     

A Time-Delay Control Approach for a Stereo Vision Based Human-Machine Interaction System

In this paper, an approach to control a 6-DoF stereo camera for the purpose of actively tracking the face of a human observer in the context of Human-Robot Interaction (HRI) is proposed. The main objective in the presented work is to cope with the critical time-delay introduced by the computer vision algorithms used to acquire the feedback variable within the control system. In the studied HRI architecture, the feedback variable is represented by the 3D position of a human subject. We proposed a predictive control method which is able to handle the high time-delay inserted by the vision elements into the control system of the stereo camera. Also, along with the predictive control approach, a novel 3D nose detection algorithm is suggested for the computation of the feedback variable. The performance of the implemented platform is given through experimental results.     

Treatment of methyl tert-butyl ether contaminated water using a dense medium plasma reactor: a mechanistic and kinetic investigation

Plasma treatment of contaminated water appears to be a promising alternative for the oxidation of aqueous organic pollutants. This study examines the kinetic and oxidation mechanisms of methyl tert-butyl ether (MTBE) in a dense medium plasma (DMP) reactor utilizing gas chromatography-mass spectrometry and gas chromatography-thermal conductivity techniques. A rate law is developed for the removal of MTBE from an aqueous solution in the DMP reactor. Rate constants are also derived for three reactor configurations and two pin array spin rates. The oxidation products from the treatment of MTBE-contaminated water in the DMP reactor were found to be predominately carbon dioxide, with smaller amounts of acetone, tert-butyl formate, and formaldehyde. The lack of stable intermediate products suggests that the MTBE is, to some extent, oxidized directly to carbon dioxide, making the DMP reactor a promising tool in the future remediation of water. Chemical and physical mechanisms together with carbon balances are used to describe the formation of the oxidation products and the important aspects of the plasma discharge.