Tunable single-mode fiber reflective grating filter

A single-mode fiber tunable reflective filter is demonstrated by translating a fan-shaped grating structure through the evanescent field of a side-polished fiber. Filter linewidths of about 1 nm were measured over tuning ranges in excess of 65 nm. Reflectivities as high as 88 percent were observed. Using the fiber filter as a feedback element, a multimode semiconductor laser was observed to oscillate in a single mode which could be discretely turned over a wavelength range of 26 nm.     

Argus: Low-Cost, Comprehensive Error Detection in Simple Cores

Argus, a novel approach for detecting errors in simple processor cores, dynamically verifies the correctness of the four tasks performed by a von Neumann core: control flow, data flow, computation, and memory access. Argus detects transient and permanent errors, with far lower impact on performance and chip area than previous techniques.     

Integration of diamond in fully-depleted silicon-on-insulator technology as buried insulator: A theoretical analysis

We examine here by electro-thermal simulation tools (SILVACO's Atlas) a configuration of Silicon-On-Insulator substrate for Fully-Depleted MOSFET architectures, incorporating diamond as buried insulator, and compare it with traditional silicon dioxide BOX for the future technological nodes of the ITRS (90 nm and below). Our aim is to give major trends to be followed in order to optimize diamond integration from electrical and thermal points of view, constraints that must be kept in mind in parallel with the technological work on thin diamond films. In this theoretical study, we perform a benchmarking between SiO₂ and diamond BOX. We first point out that the BOX thickness should not be more than few hundred nanometers to maintain electrical performances. From thermal point of view, we demonstrate that the replacement of 100 nm thick buried oxide by a 100 nm thick diamond layer can lead to about 50% reduction of the temperature when only 33% decrease can be obtained with Ultra Thin SiO₂ BOX (20 nm). Furthermore, thick diamond BOX avoids the parasitic capacitances issue that reduces Ultra Thin BOX devices working frequency.     

An arithmetical hierarchy in propositional dynamic logic

We prove that any alternation of modalities in PDL adds to its expressive power. The proof uses Turing machine models where PDL formulas define the arithmetical hierarchy of sets. As a by-product, we obtain a theorem of Berman and Paterson.     

Development and characterisation of microporous biomimetic scaffolds loaded with magnetic nanoparticles as bone repairing material

Fine-tuning of the scaffolds structural features for bone tissue engineering can be an efficient approach to regulate the specific response of the osteoblasts. Here, we loaded magnetic nanoparticles aka superparamagnetic iron oxide nanoparticles (SPIONs) into 3D composite scaffolds based on biological macromolecules (chitosan, collagen, hyaluronic acid) and calcium phosphates for potential applications in bone regeneration, using a biomimetic approach. We assessed the effects of organic (chitosan/collagen/hyaluronic acid) and inorganic (calcium phosphates, SPIONs) phase over the final features of the magnetic scaffolds (MS). Mechanical properties, magnetic susceptibility and biological fluids retention are strongly dependent on the final composition of MS and within the recommended range for application in bone regeneration. The MS architecture/pore size can be made bespoken through changes of the final organic/inorganic ratio. The scaffolds undertake mild degradation as the presence of inorganic components hinders the enzyme catalytic activity. In vitro studies indicated that osteoblasts (SaOS-2) on MS9 had similar cell behaviour activity in comparison with the TCP control. In vivo data showed an evident development of integration and resorption of the MS composites with low inflammation activity. Current findings suggest that the combination of SPIONs into 3D composite scaffolds can be a promising toolkit for bone regeneration.     

A comparison of MOSFETs aging under d.c., a.c. and alternating stress conditions

The effects of static, alternating and dynamic stress conditions on the degradation rate of 0.8μm n- and p-channel LDD MOS transistors have systematically been investigated and compared. The shifts of the threshold voltage, transconductance, linear drain current and charge pumping current were used to monitor the transistor degradation. The results suggest that the aging induced by a dynamic stress cannot be directly explained with static stress models, essentially because it is highly dependent on a larger number of parameters (biases and durations of the top and bottom levels of the pulses, transient times). The correlation of static and dynamic stresses also clarifies the degradation mechanisms, in particular the role of hot holes in the generation of interface states.     

IEEE-Compliant IDCT on FPGA-Augmented TriMedia

This paper presents a TriMedia processor extended with an IDCT reconfigurable design, and assesses the performance gain such an extension has when performing MPEG-2 decoding. We first propose the skeleton of an extension of the TriMedia architecture, which consists of a Field-Programmable Gate Array (FPGA)-based Reconfigurable Functional Unit (RFU), a Configuration Unit managing the reconfiguration of the RFU, and their associated instructions. Then, we address the computation of the 8 × 8 (2-D) IDCT on such extended TriMedia and propose a scheme to implement the 1-D IDCT operation on the RFU. When mapped on an ACEX EP1K100 FPGA from Altera, the proposed 1-D IDCT exhibits a latency of 16 and a recovery of 2 TriMedia@200 MHz cycles, and occupies 45% of the logic cells of the device. By configuring the 1-D IDCT on the RFU at application launch-time, the IEEE-compliant 2-D IDCT can be computed with the throughput of 1/32 IDCT/cycle. This figure translates to an improvement over the standard TriMedia of more than 40% in terms of computing time when 2-D IDCT is carried out in the framework of MPEG-2 decoding. Finally, the proposed reconfigurable IDCT is compared to a number of existing designs.Mihai Sima was born in Bucharest, Romania. He received the MS degree in Electrical Engineering from Politehnica University of Bucharest, and the Ph.D. degree in Electrical Engineering from Delft University of Technology, The Netherlands. He had been with the Microelectronics Company in Bucharest for 3 years, where he was involved in instrumentation electronics for integrated circuit testing. Subsequently, he joined the Telecommunications Department of Politehnica University of Bucharest, where he had been involved in digital signal processing and speech recognition for 6 years. More recently, he had been with the Faculty of Electrical Engineering, Mathematics, and Computer Science, Delft University of Technology, where he worked on reconfigurable architectures for mediaprocessing domain. He is currently an assistant professor with the Department of Electrical and Computer Engineering, University of Victoria, B.C., Canada. His research interests include computer architecture, reconfigurable computing, embedded systems, digital signal processing, and speech recognition.Sorin D. Coofan was born in Mizil, Romania. He received the MS degree in Computer Science from the Politehnica University of Bucharest, Romania, and the Ph.D. degree in Electrical Engineering from Delft University of Technology, The Netherlands. He had worked with the Research & Development Institute for Electronic Components (ICCE) in Bucharest for a decade, being involved in structured design of digital systems, design rule checking of ICs layout, logic and mixed-mode simulation of electronic circuits, testability analysis, and image processing. He is currently an associate professor with the Faculty of Electrical Engineering, Mathematics, and Computer Science, Delft University of Technology, The Netherlands. His research interests include computer arithmetic, parallel architectures, embedded systems, reconfigurable computing, nano-electronics, neural networks, computational geometry, and computer aided design.Jos T.J. van Eijndhoven was born in Roosendaal, The Netherlands. He studied Electrical Engineering at the Eindhoven University of Technology, The Netherlands, obtaining the M.Sc. and Ph.D. degrees in 1981 and 1984, respectively, for a work on piecewise linear circuit simulation. Then, he became a senior research member in the design automation group of the Eindhoven University of Technology. In 1986 he spent a sabbatical period at the IBM Thomas J. Watson Research Laboratory, Yorktown Heights, New York, for research on high level synthesis. In 1998 he joined Philips Research Laboratories in Eindhoven, The Netherlands, to work on the architectural design of programmable multimedia hardware and the associated mapping of media processing applications.Stamatis Vassiliadis was born in Manolates, Samos, Greece. He is a professor with the Faculty of Electrical Engineering, Mathematics, and Computer Science, Delft University of Technology, The Netherlands. He has also served in the faculties of Cornell University, Ithaca, NY, and the State University of New York (S.U.N.Y.), Binghamton, NY.He hadworked for a decade with IBM in the AdvancedWorkstations and Systems laboratory in Austin TX, the Mid-Hudson Valley Laboratory in Poughkeepsie, NY, and the Glendale Laboratory in Endicott, NY. In IBM he was involved in a number of projects regarding computer design, organizations, and architectures and the leadership to advanced research projects. A number of his design and implementation proposals have been implemented in commerciallyavailable systems and processors including the IBM 9370 model 60 computer system, the IBM POWER II, the IBM AS/400 Models 400, 500, and 510, Server Models 40S and 50S, the IBM AS/400 Advanced 36, and the IBM S/390 G4 and G5 computer systems. For his work, he received numerous awards including 23 levels of Publication Achievement Awards, 15 levels of Invention Achievement Awards and an Outstanding Innovation Award for Engineering/Scientific Hardware Design in 1989. In 1990 he has been awarded the highest number of USA patents in IBM, six of his 70 USA patents being rated with the highest patent ranking in IBM.Kees A. Vissers graduated the Delft University of Technology, receiving his M.Sc. in 1980. He started directly with Philips Research Laboratories in Eindhoven where he was involved in highlevel simulation and high-level synthesis. He had been heading the research on hardware/software co-design and system level design for many years, and had a significant contribution to the TriMedia VLIW processor. From 1987 till 1988 he was a visiting researcher at Carnegie Mellon University, Pittsburgh, Pennsylvania, with the group of Don Thomas. He is currently a Research Fellow with University of California at Berkeley, Department of Electrical Engineering and Computer Sciences. His research interests include video processing, embedded media processing systems, and reconfigurable computing.     

Synthesis and characterization of polyurethane cationomer/MMT hybrid composite

BACKGROUND: The development of polymeric nanocomposites incorporating intercalated or exfoliated layered silicate clays into the organic matrix has been substantially motivated by the significant improvements induced by the presence of the inorganic component. Moreover, understanding and controlling the dispersion of inorganic layers into segmented polyurethane matrices by means of ionic interactions, and exploiting these interactions to enhance physicomechanical behaviour, could be of great interest in the field of polymer nanocomposites. RESULTS: New cationic polyurethane elastomers were prepared starting from poly(butylene adipate)diol (M_n = 1000 g mol^?1), 4,4′‐diphenylmethane diisocyanate, 1,4‐butanediol and N‐methyldiethanolamine or N,N′‐β‐hydroxyethylpiperazine, used as potential quaternizable moieties. The characterization of the polymers was achieved using specific analyses employed for the macromolecular samples (Fourier transform infrared and ¹H NMR spectroscopy, thermogravimetric analysis (TGA), gel permeation chromatography). An extension of our research on polymers reinforced with organically modified montmorillonite (OM‐MMT) in order to prepare hybrid composites with improved properties was performed and the resulting materials were characterized using TGA, X‐ray diffraction, atomic force microscopy and scanning electron microscopy. Also, the mechanical properties of the cationic polyurethane/OM‐MMT composites were investigated in comparison with the pristine ionic/non‐ionic polymers and their composites containing non‐ionic polymer blended with OM‐MMT or ionic polymer and unmodified MMT. CONCLUSION: The insertion of the organically modified clay into the polymeric matrix gave an improvement of the mechanical properties of the polyurethane composites, especially the tensile strength and stiffness of the hybrid materials. Copyright © 2009 Society of Chemical Industry