Effect of non-ideal clamping shape on the resonance frequencies of silicon nanocantilevers

In this paper, we investigate the effects of non-ideal clamping shapes on the dynamic behavior of silicon nanocantilevers. We fabricated silicon nanocantilevers using silicon on insulator (SOI) wafers by employing stepper ultraviolet (UV) lithography, which permits a resolution of under 100 nm. The nanocantilevers were driven by electrostatic force inside a scanning electron microscope (SEM). Both lateral and out-of-plane resonance frequencies were visually detected with the SEM. Next, we discuss overhanging of the cantilever support and curvature at the clamping point in the silicon nanocantilevers, which generally arises in the fabrication process. We found that the fundamental out-of-plane frequency of a realistically clamped cantilever is always lower than that for a perfectly clamped cantilever, and depends on the cantilever width and the geometry of the clamping point structure. Using simulation with the finite-elements method, we demonstrate that this discrepancy is attributed to the particular geometry of the clamping point (non-zero joining curvatures and a flexible overhanging) that is obtained in the fabrication process. The influence of the material orthotropy is also investigated and is shown to be negligible.     

Laterally organized carbon nanotube arrays based on hot-filament chemical vapor deposition

Lateral porous anodic alumina (PAA) templates were used to organize carbon nanotubes (CNTs) grown by a hot-filament assisted chemical vapor deposition (HFCVD) process. For the CNT growth, we used a modified “home-made” HFCVD system with two independently powered filaments which are fitted respectively on the methane (CH₄) gas line, which serves as a carbon precursor and on the hydrogen (H₂) gas line, which acts as an etching agent for the parasitic amorphous carbon. Various activation powers of the hot filaments were used to directly or indirectly decompose the gas mixtures at relatively low substrate temperatures. A parametric study of the HFCVD process has been carried out for optimizing the confined CNTs growth inside the lateral PAA templates.     

Environmentally friendly flame‐retardant materials produced by atmospheric pressure plasma modifications

The objective of this work was to investigate plasma modification of viscose for environmentally friendly flame‐retardant cellulosic materials. Sodium silicate layers were predeposited onto viscose and cotton flannel substrates and grafted/crosslinked using atmospheric pressure plasma. The modified cellulosic fabrics tested with the automated 45° angle test chamber showed significant improvement in their flame‐retardant properties. Analysis conducted by TGA and DSC exhibited enhanced thermal stability of the treated fabrics. Furthermore, the surface analysis (XPS and SEM) confirmed the presence of the SiO₂ network attached to the substrate even after intense ultrasound washes. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Does coffee consumption alter plasma lipoprotein(a) concentrations? A systematic review

Coffee consumption alters plasma lipid and cholesterol concentrations, however, its effects on lipoprotein(a) (Lp(a)) have received little study. The aim of this PRISMA compliant systematic review was to examine the role of coffee on serum Lp(a).

This study was prospectively registered (PROSPERO 2015:CRD42015032335). PubMed, Scopus, Web of Science and Cochrane Central were searched from inception until 9th January 2016 to detect trials and epidemiological studies investigating the impact of coffee on serum Lp(a) concentrations in humans.

We identified six relevant publications describing nine experimental trials of various designs. There were a total of 640 participants across all studies and experimental groups. In short-term controlled studies, consumption of coffee, or coffee diterpenes was associated with either a reduction in serum Lp(a) of ≤11 mg/dL (6 trials, 275 participants), or no effect (2 trials, 56 participants). Conversely, one cross-sectional study with 309 participants showed serum Lp(a) was elevated in chronic consumers of boiled coffee who had a median Lp(a) of 13.0 mg/dL (range 0–130) compared with consumers of filtered coffee who had median Lp(a) 7.9 mg/dL (range 0–144).

The effect of coffee on Lp(a) is complex and may follow a biphasic time-course. The type of coffee and the method of preparation appear to be important to determining the effect on Lp(a).     

CNTs in Optoelectronic Devices: New Structural and Photophysical Insights on Porphyrin‐DWCNTs Hybrid Materials

The preparation and physical characterization of diverse porphyrin‐derived double‐walled carbon nanotubes (DWCNTs) conjugates are described. A porphyrin molecule is covalently linked and physically adsorbed to COOH‐derived DWCNTs. The photophysical properties of all porphyrin‐CNTs derivatives are studied in solution and in polymeric matrices. Definitive experimental evidence for photoinduced electron and/or energy transfer processes involving the porphyrin chromophores and the CNT wall is not obtained, but solid‐state UV‐vis absorption profiles display electronic transitions fingerprinting J‐ and H‐ type aggregates, where porphyrin molecules intermolecularly interact “head‐to‐tail” and “face‐to‐face”, respectively. In parallel, molecular modeling based on force‐field simulations is performed to understand the structure of the porphyrin‐CNTs interface and the nature of the interactions between the porphyrins and the DWCNTs. Finally, multilayered ‐ type devices are fabricated with the aim of investigating the interaction of the porphyrin‐derived DWCNTs with poly(3‐hexylthiophene)‐pyrene matrices containing small amounts of 1‐[3‐(methoxycarbonyl)propyl]‐1‐phenyl‐[6.6]C₆₁.     

Fully depleted double-gate MSDRAM cell with additional nonvolatile functionality

We demonstrate a new fully depleted (FD) double-gate (DG) MSDRAM cell, which features SONOS type storage node at the back-gate (control-gate). This single-transistor cell, based on the meta-stable dip (MSD) hysteresis effect, can also be operated in non-volatile memory (NVM) mode. The NVM functionality is achieved by Fowler–Nordheim tunneling hole injection into the nitride storage node; the injected holes induce a permanent inversion layer in silicon body. The proposed device shows a large current ratio between ‘1’ and ‘0’ states (～10³) and a wide memory window (～3 V). The effect of the NVM functionality on the MSD hysteresis was investigated and combined with the effect of the control-gate bias. The SONOS charging can be used for replacing the second gate (i.e. enabling single-gate MSDRAM) or for achieving ‘unified’ memory operation.     

Capacitor-less A-RAM SOI memory: Principles, scaling and expected performance

Based on numerical TCAD simulations, the novel capacitor-less A-RAM memory cell is detailed in terms of electrostatic effects, transient operation and retention time. The particular double-body device architecture on SOI is beneficial for better scalability than conventional 1T-DRAMs. Its dual body partitioning suppresses the supercoupling effect in SOI; the two types of carriers can coexist inside ultrathin fully depleted transistors. Electrons and holes are accommodated in different bodies, separated by an insulator layer, but remain electrostatically coupled. A-RAM features easy discrimination of ‘0’ and ‘1’ states, simple control waveforms and very promising performance.