Addressing the Risk of Surface Water Intrusion in Old Romanian Salt Mines

In Romania, surface waters near underground salt mines represent a significant risk to the stability of the mine workings. Such problems occur in many salt exploiting facilities, i.e. Slanic Prahova, Targu Ocna, Praid. In this paper, the authors present a method of dealing with this issue at the Praid salt mine with research targeted at avoiding the hazard presented by intrusion of surface waters into old mine workings. Monitoring activities are proposed to prevent damage due to the seepage of Corund Creek water into the subsurface salt body, which could compromise and even produce collapses in the salt mine sanatorium and old and new mines.     

A comparison of MOSFETs aging under d.c., a.c. and alternating stress conditions

The effects of static, alternating and dynamic stress conditions on the degradation rate of 0.8μm n- and p-channel LDD MOS transistors have systematically been investigated and compared. The shifts of the threshold voltage, transconductance, linear drain current and charge pumping current were used to monitor the transistor degradation. The results suggest that the aging induced by a dynamic stress cannot be directly explained with static stress models, essentially because it is highly dependent on a larger number of parameters (biases and durations of the top and bottom levels of the pulses, transient times). The correlation of static and dynamic stresses also clarifies the degradation mechanisms, in particular the role of hot holes in the generation of interface states.     

Optimizing polarization states in a figure-8 laser using anonreciprocal phase shifter

The polarization states in a figure and laser are analyzed using Jones matrices. The analysis shows that a figure-8 laser in CW operation does not give enough information to allow the optimization of the birefringence for mode-locking. A switchable nonreciprocal phase shifter is proposed to provide a simple way to optimize the birefringence for a mode-locked figure-8 laser. Using this device, the mode-locking of a diode-pumped figure-8 laser was started, with a probability better than 99%, by following a sequence of predetermined mechanical adjustment. With the proposed nonreciprocal phase shifter, the optimization and starting of a figure-8 laser can easily be automated     

IEEE-Compliant IDCT on FPGA-Augmented TriMedia

This paper presents a TriMedia processor extended with an IDCT reconfigurable design, and assesses the performance gain such an extension has when performing MPEG-2 decoding. We first propose the skeleton of an extension of the TriMedia architecture, which consists of a Field-Programmable Gate Array (FPGA)-based Reconfigurable Functional Unit (RFU), a Configuration Unit managing the reconfiguration of the RFU, and their associated instructions. Then, we address the computation of the 8 × 8 (2-D) IDCT on such extended TriMedia and propose a scheme to implement the 1-D IDCT operation on the RFU. When mapped on an ACEX EP1K100 FPGA from Altera, the proposed 1-D IDCT exhibits a latency of 16 and a recovery of 2 TriMedia@200 MHz cycles, and occupies 45% of the logic cells of the device. By configuring the 1-D IDCT on the RFU at application launch-time, the IEEE-compliant 2-D IDCT can be computed with the throughput of 1/32 IDCT/cycle. This figure translates to an improvement over the standard TriMedia of more than 40% in terms of computing time when 2-D IDCT is carried out in the framework of MPEG-2 decoding. Finally, the proposed reconfigurable IDCT is compared to a number of existing designs.Mihai Sima was born in Bucharest, Romania. He received the MS degree in Electrical Engineering from Politehnica University of Bucharest, and the Ph.D. degree in Electrical Engineering from Delft University of Technology, The Netherlands. He had been with the Microelectronics Company in Bucharest for 3 years, where he was involved in instrumentation electronics for integrated circuit testing. Subsequently, he joined the Telecommunications Department of Politehnica University of Bucharest, where he had been involved in digital signal processing and speech recognition for 6 years. More recently, he had been with the Faculty of Electrical Engineering, Mathematics, and Computer Science, Delft University of Technology, where he worked on reconfigurable architectures for mediaprocessing domain. He is currently an assistant professor with the Department of Electrical and Computer Engineering, University of Victoria, B.C., Canada. His research interests include computer architecture, reconfigurable computing, embedded systems, digital signal processing, and speech recognition.Sorin D. Coofan was born in Mizil, Romania. He received the MS degree in Computer Science from the Politehnica University of Bucharest, Romania, and the Ph.D. degree in Electrical Engineering from Delft University of Technology, The Netherlands. He had worked with the Research & Development Institute for Electronic Components (ICCE) in Bucharest for a decade, being involved in structured design of digital systems, design rule checking of ICs layout, logic and mixed-mode simulation of electronic circuits, testability analysis, and image processing. He is currently an associate professor with the Faculty of Electrical Engineering, Mathematics, and Computer Science, Delft University of Technology, The Netherlands. His research interests include computer arithmetic, parallel architectures, embedded systems, reconfigurable computing, nano-electronics, neural networks, computational geometry, and computer aided design.Jos T.J. van Eijndhoven was born in Roosendaal, The Netherlands. He studied Electrical Engineering at the Eindhoven University of Technology, The Netherlands, obtaining the M.Sc. and Ph.D. degrees in 1981 and 1984, respectively, for a work on piecewise linear circuit simulation. Then, he became a senior research member in the design automation group of the Eindhoven University of Technology. In 1986 he spent a sabbatical period at the IBM Thomas J. Watson Research Laboratory, Yorktown Heights, New York, for research on high level synthesis. In 1998 he joined Philips Research Laboratories in Eindhoven, The Netherlands, to work on the architectural design of programmable multimedia hardware and the associated mapping of media processing applications.Stamatis Vassiliadis was born in Manolates, Samos, Greece. He is a professor with the Faculty of Electrical Engineering, Mathematics, and Computer Science, Delft University of Technology, The Netherlands. He has also served in the faculties of Cornell University, Ithaca, NY, and the State University of New York (S.U.N.Y.), Binghamton, NY.He hadworked for a decade with IBM in the AdvancedWorkstations and Systems laboratory in Austin TX, the Mid-Hudson Valley Laboratory in Poughkeepsie, NY, and the Glendale Laboratory in Endicott, NY. In IBM he was involved in a number of projects regarding computer design, organizations, and architectures and the leadership to advanced research projects. A number of his design and implementation proposals have been implemented in commerciallyavailable systems and processors including the IBM 9370 model 60 computer system, the IBM POWER II, the IBM AS/400 Models 400, 500, and 510, Server Models 40S and 50S, the IBM AS/400 Advanced 36, and the IBM S/390 G4 and G5 computer systems. For his work, he received numerous awards including 23 levels of Publication Achievement Awards, 15 levels of Invention Achievement Awards and an Outstanding Innovation Award for Engineering/Scientific Hardware Design in 1989. In 1990 he has been awarded the highest number of USA patents in IBM, six of his 70 USA patents being rated with the highest patent ranking in IBM.Kees A. Vissers graduated the Delft University of Technology, receiving his M.Sc. in 1980. He started directly with Philips Research Laboratories in Eindhoven where he was involved in highlevel simulation and high-level synthesis. He had been heading the research on hardware/software co-design and system level design for many years, and had a significant contribution to the TriMedia VLIW processor. From 1987 till 1988 he was a visiting researcher at Carnegie Mellon University, Pittsburgh, Pennsylvania, with the group of Don Thomas. He is currently a Research Fellow with University of California at Berkeley, Department of Electrical Engineering and Computer Sciences. His research interests include video processing, embedded media processing systems, and reconfigurable computing.     

Conformal anodic oxidation of aluminum thin films

Membrane-based synthesis, also called template synthesis, is a very general approach used to prepare arrays of nanomaterials with monodispersed geometrical features. The most commonly used porous templates are track-etched polycarbonate and porous anodic alumina membranes. Common to all these templates is the fact that the pores are perpendicular to the surface of the membrane. Here, a novel approach is presented, where the pores are synthesized parallel to the surface of the membrane. For the first time, the anodic oxidation of an aluminum thin film is performed laterally, i.e., parallel to the surface of the substrate, instead of perpendicular as usually done. For low anodic oxidation voltages (between 3 and 5 V) we obtain highly regular and ordered pore arrays, at least over a few hundred nanometers length, with a minimum pore size of approximately 3 to 4 nm. With such porous alumina structures, the controlled in-plane organization of arrays of template-grown nanowires and carbon nanotubes for reproducible device fabrication should be much easier.     

Development and characterisation of microporous biomimetic scaffolds loaded with magnetic nanoparticles as bone repairing material

Fine-tuning of the scaffolds structural features for bone tissue engineering can be an efficient approach to regulate the specific response of the osteoblasts. Here, we loaded magnetic nanoparticles aka superparamagnetic iron oxide nanoparticles (SPIONs) into 3D composite scaffolds based on biological macromolecules (chitosan, collagen, hyaluronic acid) and calcium phosphates for potential applications in bone regeneration, using a biomimetic approach. We assessed the effects of organic (chitosan/collagen/hyaluronic acid) and inorganic (calcium phosphates, SPIONs) phase over the final features of the magnetic scaffolds (MS). Mechanical properties, magnetic susceptibility and biological fluids retention are strongly dependent on the final composition of MS and within the recommended range for application in bone regeneration. The MS architecture/pore size can be made bespoken through changes of the final organic/inorganic ratio. The scaffolds undertake mild degradation as the presence of inorganic components hinders the enzyme catalytic activity. In vitro studies indicated that osteoblasts (SaOS-2) on MS9 had similar cell behaviour activity in comparison with the TCP control. In vivo data showed an evident development of integration and resorption of the MS composites with low inflammation activity. Current findings suggest that the combination of SPIONs into 3D composite scaffolds can be a promising toolkit for bone regeneration.     

Discrete‐time sector based hands‐off control for nonlinear system

This article presents a hands‐off control design for discrete‐time nonlinear system with a special type of nonlinear sector termed as “discrete‐time sector.” The design method to define the boundary of a discrete‐time sector is done with control‐Lyapunov function. The generalization of nonlinear system is viewed in the perspective of a comparison function. By means of a proposed sector, a switching control is designed such that no control action is experienced inside the sector thus, saving unnecessary control efforts. However, to study the robustness for discrete‐time system, a hands‐off control is modified to ensure the monotonic decrease in the energy of the system. Finally, the proposed approach is verified with the simulation results.     

Biosynthesis of silver nanoparticles in collagen gel improves their medical use in periodontitis treatment

Silver nanoparticles (AgNP) suspensions were biosynthesized by silver ions reduction in the presence of collagen, a nontoxic, organic polymer, intending to improve their medical use in periodontitis treatment. Spectrophotometric measurements showed a time- and concentration-dependent increase of AgNP formation in each suspension variant. Transmission electron microscopy revealed spherical morphology of AgNP in collagen and their mean diameter size was around 30?nm. The particle size distribution and zeta potential values of AgNP in collagen were determined by dynamic light scattering measurements. The surface charge of AgNP in collagen was positive, while commercial AgNP stabilized in citrate had negative surface charge. In vitro cytotoxicity testing of AgNP in collagen showed that they were biocompatible with human gingival fibroblasts in a wider range of concentrations than commercial nanoparticles. The antibacterial activity of AgNP in collagen against two pathogenic strains present in the periodontal pocket was dose-dependent and higher than that of AgNP in citrate. All these results demonstrated that AgNP prepared in collagen gel had improved properties, like small diameter, positive surface charge, high biocompatibility in human gingival fibroblasts, efficiency against bacterial growth and, thus, better therapeutic potential in periodontal disease treatment.