Effect of particle size on flow and mixing in a bladed granular mixer

A number of studies have modeled flow and mixing of granular materials using the discrete element method (DEM). In an attempt to reduce computational costs, many of these DEM studies model particles larger than the actual particle size without investigating the implications of this assumption. Using DEM, the influence of the modeled particle size on flow and mixing in a bladed granular mixer is studied. The predicted flow microdynamics, including mixing rates, are strongly dependent on the particle diameter. The effect of particle size on macroscopic advective flow also is significant, particularly for dilute flow regions. These results suggest that the influence of particle size needs to be taken into consideration when using larger particles in DEM mixing simulations. To guide scale‐up efforts, particle‐size‐based scaling relationships for several key flow measurements are presented. © 2014 American Institute of Chemical Engineers AIChE J, 61: 46–57, 2015     

Remote monitoring of different electrical parameters of multi-machine system using PC

This paper describes a PC based centralized monitoring of the running condition of a multi-machine system. This kind of monitoring from remote central location is one of the primary requirements in today’s era of automation. The convergence of embedded system like microcontroller/DSP/FPGA, etc., now-a-days, is adding a new dimension to enhance the capability of the PC based data acquisition. In this present approach, conditions of different parameters of each motor have been measured by dedicated microcontroller based hardware. All these units are connected in a network using bus topology. All parameters are communicated to a remote PC through this bus where user friendly state-of-the-art developed software stores it for display and analysis purposes.     

Study of pyro-carbon coated alumina kernel using mixed contrast transfer based X-ray phase retrieval technique

We have used the contrast transfer function based X-ray phase retrieval technique for phase retrieval studies on a two-component system. Pyro-carbon coated alumina matrix was chosen as a two-component system for these studies. Simulations as well as experimental results are presented. This paper shows that X-ray phase contrast along with phase retrieval can become an alternative tool for non-destructive characterization of these materials. We have also attempted to retrieve the spatial distribution of the projected thickness map of the two different elements.     

Facile Suzuki coupling over ortho-metalated palladium(II) complex anchored on 2D-hexagonal mesoporous organosilica

Phenyl functionalized 2D-hexagonal mesoporous silica material has been synthesized by cationic/non-ionic mixed surfactant templating route. The phenyl group of this mesoporous material is further functionalized via nitration and then reduction of that nitro group to amino functionality, followed by Schiff base condensation and heterogenization of a palladium(II) complex, yielded an ortho-metalated palladium(II) complex anchored in a ordered mesoporous silica matrix. This supported metal complex acts as an efficient catalyst in the Suzuki cross-coupling reaction and shows high selectivity for the bi-aryl products.     

Finding rectilinear least cost paths in the presence of convex polygonal congested regions

This paper considers the problem of finding the least cost rectilinear distance path in the presence of convex polygonal congested regions. We demonstrate that there are a finite, though exponential number of potential staircase least cost paths between a specified pair of origin–destination points. An upper bound for the number of entry/exit points of a rectilinear path between two points specified a priori in the presence of a congested region is obtained. Based on this key finding, a “memory-based probing algorithm” is proposed for the problem and computational experience for various problem instances is reported. A special case where polynomial time solutions can be obtained has also been outlined.     

Self-assembled polyaniline nanorods synthesized by facile route of dispersion polymerization

We report the preparation of ordered polyaniline nanorod arrays by a simple method without the use of any template. The synthesis method is by a chemical route, viz. dispersion polymerization of aniline in polyvinyl alcohol. The nanorods obtained have a diameter of 100-500 nm and a length of a few micrometers. Films containing the nanorod assembly have been characterized by SEM, XRD and FTIR spectroscopy. We have also measured I-V characteristics and the temperature dependence of the conductivity of the films. We discuss the formation mechanism of the self-assembled nanostructures, the morphology of the films, and the crystallinity and the transport mechanism.     

Correction to: Comparative analysis of limit equilibrium and numerical methods for prediction of a landslide

Bulletin of Engineering Geology and the Environment - Landslides that occur due to the rapid motion of a rock-mass are a primary risk in mountainous terrains and are a danger to human life and...     

Effect of silica doping on the densification and grain growth in zinc oxide

The ability of silica (SiO₂) in controlling the densification and grain growth behavior of nano crystalline zinc oxide (ZnO) has been systematically studied. It has been observed that SiO₂ acts as a sintering inhibitor in the ZnO–SiO₂ system up to 4 wt.% limiting value beyond which densification behavior of the system remains almost unchanged, especially above 1100 °C. The addition of SiO₂ to ZnO retards grain growth which in turn results a finer ultimate grain size as compared to the undoped ZnO. However, stabilization in grain size occurs at ≥4 wt.% SiO₂ addition. It has been observed that SiO₂ incorporation changes the grain growth mechanism up to 4 wt.% addition, beyond which no remarkable changes was noticed. The grain growth (n) shows distinctly different slopes as a function of sintering time for the SiO₂ doped ZnO systems than undoped ZnO. The different slopes tend to indicate that different diffusion mechanisms and probably the formation of a secondary phase (Zn–Si–O) at the grain boundary control the densification and grain growth. The thermal expansion coefficient of the system has been found to decrease substantially beyond 4 wt.% SiO₂ addition to ZnO.     

Scour Downstream of an Apron Due to Submerged Horizontal Jets

The results of an experimental investigation on scour of noncohesive sediment beds (uniform and nonuniform sediments) downstream of an apron due to a submerged horizontal jet issuing from a sluice opening are presented. Attempts are made to explain the similarity existing in the scour process and profiles (including dune in the downstream of the scour hole). The scour profiles at different times follow a particular geometrical similarity and can be expressed by the combination of two polynomials. Using experimental scour depth at different times, the time variation of scour depth is scaled by an exponential law, where time scale increases linearly with densimetric Froude number. The equilibrium scour depth, related to the sediment size relative to the sluice opening, decreases with increase in sediment size and sluice opening. On the other hand, the equilibrium scour depth increases with increase in densimetric Froude number. The variation of equilibrium scour depth with tailwater depth indicates a critical tailwater depth corresponding to a minimum equilibrium scour depth. The effect of sediment gradation on scour depth is pronounced for nonuniform sediments, which reduce scour depth significantly due to formation of an armor layer, and therefore prompted study of the reduction of scour depth by a launching apron placed downstream of the rigid apron. The results show that the average reduction of scour depth by placing a launching apron was 39%, having a maximum of 57.3% and a minimum of 16.2%. The characteristic parameters affecting maximum equilibrium scour depth are identified based on the physical reasoning and dimensional analysis. Equation of maximum equilibrium scour depth obtained empirically agrees well with the experimental data.     

Interferometer for use in wave-front testing with a cross slit

A simple and novel interferometric setup for wave-front testing that uses a cross slit is described. In this method, the test beam illuminates a cross slit placed at the front focal plane of a Fourier lens. It selects two orthogonal slices from the test beam, and the interference of these two beams is observed at a slightly defocused plane near the back focal plane. Fringes of different conical forms (circular, elliptical, or hyperbolic) so obtained can be used for testing a coherent wave front in general. The theory, supported by some experimental results, is presented. An application of the method to the study of the nature of asymmetry in the beam profile of a semiconductor diode laser beam is demonstrated.