Preparation and characterization of vanado-, ferri-, and gallosilicate catalysts in the presence of fluoride ions

Vanado-, ferri-, and gallosilicate catalysts were prepared from the mixtures containing colloidal silica, corresponding metal source, tetrapropylammonium bromide, and NH₄F by hydrothermal crystallization at 175°C for 7 days. The pH value of the reaction mixture was low (pH<8) compared to the conventional methods. The metal compounds have higher solubilites in these conditions than conventional conditions (pH>10). The size distribution and the size of final products were found to be more homogeneous and larger than those of metallosilicates prepared in strong alkaline media. The characterization of metallosilicates with IF!, X-ray diffraction, SEM, EPR, and²⁹Si MAS NMR, indicated that corresponding metal atoms were successfully incorporated into the tetrahedral lattice sites of the ZSM-5 structure.     

Temperature-dependent transparency of poly(HPMA-co-DMA) hydrogels: effect of synthesis parameters

The acrylic comonomers hydroxypropyl methacrylate (HPMA) and N,N-dimethylaminoethyl methacrylate (DMA) have been used in several earlier studies to produce pH-responsive hydrogels. However, these same monomers can also be used to prepare hydrogels that are highly responsive to temperature. One manifestation of this temperature sensitivity is a sharp decrease in hydrogel optical transparency that occurs when the temperature exceeds a critical transition value. For example, a hydrogel that exhibits a swelling transition at the physiological pH value of 7.4 has a transition temperature of about 45 °C when the environmental salt concentration is 0.15 M. The value of the transparency transition temperature is shown to depend on hydrogel synthesis parameters such as comonomer mole ratio, crosslinker mole ratio, and even initiator concentration. By reducing the mole ratio of the crosslinker tetraethylene glycol dimethacrylate (TEGDMA), the transition temperature can be lowered by as much as 15 °C. Environmental salt concentration and solvent polarity are also shown to influence the transition temperature.     

Vitamin A microencapsulation within poly(methyl methacrylate)‐g‐polyethylenimine microspheres: Localized proton buffering effect on vitamin A stability

To stabilize vitamin A in a cosmetic/dermatological formulation, we present here a new encapsulation method based on polymer microspheres having a localized “proton‐buffering” capacity. Poly(methyl methacrylate)‐g‐polyethylenimine (PMMA‐g‐PEI) was prepared by direct condensation grafting of PEI onto poly(methyl methacrylate‐co‐methyl acrylic acid). The reaction was confirmed by FT‐IR analysis showing the amide vibration at 1,550 cm^?1. Elemental analysis indicated that the weight content of the grafted PEI was 1.6% (w/w). Vitamin A was encapsulated into PMMA‐g‐PEI microspheres by using an oil‐in‐water (O/W) single emulsion method. The presence of PEI moiety dramatically improved the chemical stability of vitamin A in microspheres. Vitamin A encapsulated within PMMA‐g‐PEI microspheres maintained 91% of its initial activity after 30‐day incubation at 40°C, while only maintaining 60% within plain PMMA microspheres. This study demonstrates that proton‐buffering within hydrophobic polymer matrix is a useful strategy for stabilizing “acid‐labile” active ingredients. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 517–522, 2004     

Synthesis of a new conjugated polymer based on benzimidazole and its sensory properties using the fluorescence‐quenching effect

A new anionic conjugated polymer containing a fluorene group in the main chain was designed and synthesized from poly(2,7‐(9,9′‐dihexylfluorene)‐5,5′‐bibenzimidazole) (PFBI). The polymer showed strong blue emission with high quantum efficiency (0.64) at 450 nm in MeOH and the dramatic quenching effect by Methyl Viologen (MV²⁺). The fluorescence‐quenching effect results from the weak complex formation between an anionic polymer and electron acceptors such as bipyridinium derivatives. The linear Stern–Volmer constant (K_sv) was 3.7×10⁵ M^?1 for MV²⁺. The newly synthesized polymer is expected to show the applicability for biological and chemical sensors. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 900–904, 2004     

Modeling heat transfer in screw extrusion with special application to modular self‐wiping co‐rotating twin‐screw extrusion

This paper proposes two important models useful for describing heat transfer and temperature profiles in single and modular self‐wiping co‐rotating twin‐screw extruders. One model predicts heat transfer coefficients. Calculations of the barrel and screw heat transfer coefficients are made for various modules in different diameter extruders. We compare the values of the heat transfer coefficients from the model with those from literature. The second model predicts the axial screw temperature profile when the barrel, but not the screw, is heated, Example calculations of the cup mixing and screw temperature profiles are also made for different diameter extruders.     

Phase separation and crystallization behavior in extruded polypropylene/ethylene–propylene rubber blends

Liquid–liquid (L–L) phase separation and its effects on crystallization in polypropylene (PP)/ethylene–propylene rubber (EPR) blends obtained by melt extrusion were investigated by time‐resolved light scattering (TRLS) and optical microscopy. L–L phase separation via spinodal decomposition (SD) was confirmed by TRLS data. After L–L phase separation at 250°C for various durations, blend samples were subjected to a temperature drop to 130°C for isothermal crystallization, and the effects of L–L phase separation on crystallization were investigated. Memory of the L–L phase separation via SD remained for crystallization. The crystallization rate decreased with increasing L–L phase‐separated time at 250°C. Slow crystallization for the long L–L phase‐separated time could be ascribed to decreasing chain mobility of PP with a decrease in the EPR component in the PP‐rich region. The propylene‐rich EPR exhibited good affinity with PP, leading to a slow growth of a concentration fluctuation during annealing. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 695–700, 2001     

Effects of bimetallic catalyst composition and growth parameters on the growth density and diameter of carbon nanotubes

Multi-wall carbon nanotubes (MWNTs) were synthesized by catalytic decomposition of acetylene over Fe, Ni and Fe-Ni bimetallic catalysts supported on alumina under various controlled conditions. The growth density and diameter of CNTs were markedly dependent on the activation time of catalysts in H₂ atmosphere, reaction time, reaction temperature, flow rate of acetylene, and catalyst composition. Bimetallic catalysts were apt to produce narrower diameter of CNTs than single metal catalysts. For the growth of CNTs at 600 ‡C under 10/100 seem flow of C₂H₂/H₂ mixture, the narrowest diameter about 20 nm was observed at the reaction time of 1 h for 20Fe : 20Ni : 60Al₂O₃ catalyst, but at that of 1.5 h for 10Fe : 30Ni : 60Al₂O₃ catalyst. It was considered that the diameter and density of CNTs decreased with the increase of the growth time mainly due to hydrogen etching. The growth of CNTs followed the tip growth mode.     

Crystallization and Photoactivity of Tio2 Films Formed on Soda Lime Glass by a Sol-Gel Dip-Coating Process

Transparent nanophase TiO₂ thin films on soda lime glass were prepared from titanium tetraisopropoxide (TTIP) by a sol-gel dip-coating method. The TiO₂ films had amorphous phase up to 400°C and anatase phase at 500°C. The amorphous TiO₂ films obtained at 300–400°C showed considerable photoactivity for the degradation of formic acid. The photoactivity of the TiO₂ films was enhanced with increasing calcination temperature from 300° to 500°C. The crystallinity of the anatase films at 500°C was improved with increasing calcination time up to 2 h and reduced with a further increase in calcination time to 4 h due to the significant formation of sodium titanate phase as a result of sodium diffusion. The four-time-dipping anatase films at 500°C exhibited the greatest photoactivity at the calcination time of 2 h. Sodium diffusion into TiO₂ films was retarded by a SiO₂ underlayer of 50 nm in thickness.     

Synthesis and biological activity of phthalimide‐based polymers containing 5‐fluorouracil

The attachment of anticancer agents to polymers is a promising approach towards reducing the toxic side‐effects and retaining the potent antitumour activity of these agents. A new tetrahydrophthalimido monomer containing 5‐fluorouracil (ETPFU) and its homopolymer and copolymers with acrylic acid (AA) and with vinyl acetate (VAc) have been synthesized and spectroscopically characterized. The ETPFU contents in poly(ETPFU‐co‐AA) and poly(ETPFU‐co‐VAc) obtained by elemental analysis were 21 mol% and 20 mol%, respectively. The average molecular weights of the polymers determined by gel permeation chromatography were as follows: M_n = 8900 g mol^?1, M_w = 13 300 g mol^?1, M_w/M_n = 1.5 for poly(ETPFU); M_n = 13 500 g mol^?1, M_w = 16 600 g mol^?1, M_w/M_n = 1.2 for poly(ETPFU‐co‐AA); M_n = 8300 g mol^?1, M_w = 11 600 g mol^?1, M_w/M_n = 1.4 poly(ETPFU‐co‐VAc). The in vitro cytotoxicity of the compounds against FM3A and U937 cancer cell lines increased in the following order: ETPFU > 5‐FU > poly(ETPFU) > poly(ETPFU‐co‐AA) > poly(ETPFU‐co‐VAc). The in vivo antitumour activities of all the polymers in Balb/C mice bearing the sarcoma 180 tumour cell line were greater than those of 5‐FU and monomer at the highest dose (800 mg kg^?1). © 2002 Society of Chemical Industry     

Effects of Acetic Acid on the Crystallization Temperature of Sol–Gel-Derived MgO Nano-Powders and Thin Films

The influences of acetic acid addition to Mg-methoxide on the stability of the precursor and the crystallization behavior of sol–gel-derived MgO nano-powders and thin films were investigated using X-ray powder diffraction, transmission electron microscopy, Fourier-transformed infrared spectroscopy, and thermogravimetry. The addition of acetic acid enhanced the stability of the alkoxide against precipitation. Moreover, during postheat treatment of the gel powders treated with acetic acid, a significantly lowered crystallization temperature (250°C) was observed as compared to the untreated counterpart (350°C). The low-temperature crystallization of MgO, induced by the modification of Mg-methoxide with acetic acid, was related to the decomposition of organics at a lower temperature. These results could be explained in terms of the decrease of the O–R bond strength depending on the increase in the alkyl group size. MgO thin films having a high degree of crystallinity were successfully obtained from the Mg-methoxide treated with acetic acid at 300°C. The low-temperature crystallization of sol–gel-derived MgO thin films showed the feasibility for their application as a protective layer in alternative current plasma display panel cells.