锌-三氧化二铬复合镀层的特性

采用由氧化锌12g/L、氢氧化钠94 g/L、2-氨基-3-羧基吡啶4.2 g/L、四乙烯五胺17g/L、三乙醇胺2g/L、专利表面活性剂0.5 g/L及碳三氧化二铬(粒径2μm)0～ 11 g/L组成的镀液,于温度50℃、pH 6.5和电流密度4A/dm2的条件下,在低碳钢上电镀Zn-Cr2O3复合镀层.其显微硬度采...     

Electrochemical oxidation of boron containing compounds on titanium carbide and its implications to direct fuel cells

Electrochemical oxidation of sodium borohydride (NaBH₄) and ammonia borane (NH₃BH₃) (AB) have been studied on titanium carbide electrode. The oxidation is followed by using cyclic voltammetry, chronoamperometry and polarization measurements. A fuel cell with TiC as anode and 40 wt% Pt/C as cathode is constructed and the polarization behaviour is studied with NaBH₄ as anodic fuel and hydrogen peroxide as catholyte. A maximum power density of 65 mW cm⁻² at a load current density of 83 mA cm⁻² is obtained at 343 K in the case of borhydride-based fuel cell and a value of 85 mW cm⁻² at 105 mA cm⁻² is obtained in the case of AB-based fuel cell at 353 K.     

Inverted emulsion polymerization route to polyaniline‐3D nanofiber network using sulfonated‐p‐cresol as novel dopant

Sulfonated‐p‐cresol (SPC) was used as novel dopant for the first time in the synthesis of polyaniline in 3D nanofiber networks (PANI‐3D). Polyaniline in 3D nanofiber network was prepared using organic solvent soluble benzoyl peroxide as oxidizing agent in presence of SPC and sodium lauryl sulfate (SLS) surfactant via inverted emulsion polymerization pathway. The influence of synthesis conditions such as the concentration of the reactants, stirring/static condition, and temperature etc., on the properties and formation of polyaniline nanofiber network were investigated. Polyaniline in 3D nanofiber network with 40–160 nm (diameter), high yield (134 wt % with respect to aniline used), and reasonably good conductivity (0.1 S/cm) was obtained in 24 h time. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Simulation Studies of Annealing Effect on a mc-Si Ingot for Photovoltaic Application

Silicon - A multi-crystalline silicon (mc-Si) ingot was grown by the directional solidification (DS) process for photovoltaic (PV) application. We have numerically investigated shear stress and...     

Dispersed ZrO2 nanoparticles in MCM‐48 with high adsorption activity

A new two‐step synthesis of ZrO₂‐MCM nanocomposites using the gel combustion technique was accomplished; the resulting material had a high‐surface area and showed very high adsorption activity. The deposition of 2–5 nm ZrO₂ particles over MCM was achieved using gel combustion technique with glycine as a fuel, and the formation of nanocomposites was confirmed using transmission electron microscopy. The composites were also characterized by XRD, SEM, FTIR and N₂ adsorption‐desorption analysis. The nanocomposites were tested for the adsorption of cationic dyes. High rates of adsorption and large dye uptake were observed over the nanocomposites. The rate of adsorption over the nanocomposites was higher than that observed for physical ZrO₂‐MCM mixtures and commercial activated carbon. The nanocomposite with 10 wt % ZrO₂ showed the highest rate of adsorption owing to the synergistic effects of ZrO₂ surface groups, smaller particle size, fine dispersion and high‐surface area of the composite. © 2012 American Institute of Chemical Engineers AIChE J, 58: 2987–2996, 2012     

Potential of <Emphasis Type="Italic">Jatropha curcas</Emphasis> as a Biofuel,Animal Feed and Health Products

Jatropha curcas is a multipurpose plant with numerous attributes. It can potentially become one of the world’s key energy crops. Its seed weighs 0.53–0.86 g and the seed kernel contains 22–27% protein and 57–63% lipid indicating good nutritional value. The seeds can produce crude vegetable oil that can be transformed into high quality biodiesel. Several methods for oil extraction have been developed. In all processes, about 75% of the weight of the seed remains as a press cake containing mainly carbohydrates, protein and residual oil and is a potential source of livestock feed. The highly toxic nature of whole as well as dehulled seed meal due to the presence of high levels of shells, toxic phorbol esters and other antinutrients prevents its use in animal diet. The genetic variation among accessions from different regions of the world and rich diversity among Mexican genotypes in terms of phorbol ester content and distinct molecular profiles indicates the potential for improvement of germplasm of Jatropha through breeding programs. The extracts of Jatropha display potent cytotoxic, antitumor, anti-inflammatory and antimicrobial activities. The possibilities on the exploitation potential of this plant through various applications have been explored.     

Evolution of magnetic and bone mineral phases in heat-treated bioactive glass containing zinc and iron oxides

Melt-quenched 15(ZnO,Fe₂O₃) 50SiO₂·20(CaO,P₂O₅) 15Na₂O bioactive glass was heat treated at temperatures (T_A) ranging from 550°C to 850°C for different time periods (t_A=1, 2 and 3 hours) to understand its devitrification characteristics. Crystallization of calcium sodium phosphate, zinc ferrite, magnetite, and hematite phases depended on heat treatment conditions. Decrease in saturation magnetizations (M_s) with increase in t_A of glass heat treated at T_A≥750°C is attributed to the formation of hematite which is a weak magnetic material. Magnetic properties as functions of T_A and t_A are interpreted on the basis of clustering of Fe ions, super-exchange interaction between Fe²⁺ and Fe³⁺ ions and formation of ferrimagnetic and weakly magnetic iron oxide phases with different heat treatment conditions. Electron paramagnetic resonance parameters reveal the variations in site distortions and randomness in Fe ion environment in the matrix upon heat treatment. In vitro mineralization ability of the glass-ceramics was evaluated by immersion in simulated body fluid (SBF) and monitoring both the pH variation of SBF and formation of hydroxyapatite surface layer as a function of immersion time. These studies help in assessing these glass-ceramics for hyperthermia treatment and in optimizing the processing conditions for this application.     

Effect of nonprotein polymers on water‐uptake properties of fish protein‐based hydrogel

The effects of nonprotein polymers on the water‐swelling properties of fish protein‐based hydrogel were studied. Inclusion of carboxymethyl cellulose (CMC), poly(ethylene glycol) (PEG), poly(vinyl alcohol) (PVA), or guar gum at a 2.5% (w/w) level in an 80% ethylenediaminetetraacetic dianhydide (EDTAD)‐modified fish protein hydrogel (10% monomer concentration) significantly decreased the extent of water uptake of the hydrogel. Among these polymers, PVA exhibited the greatest inhibitory effect. The inhibitory effect of these polymers on the water uptake of fish protein hydrogel was apparently due to the thermodynamic incompatibility of these polymers with the fish protein gel network and the consequent effect on the extent of relaxation of the crosslinked polypeptide network. In contrast, inclusion of 60% EDTAD‐modified soy protein up to a level of 40% of the total protein in the gel did not affect the extent of the equilibrium water uptake of the gel. At higher levels, however, soy protein also decreased the amount of water uptake by the gel. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 45–51, 2002     

Proteomics analysis of carbon-starved Mycobacterium smegmatis: induction of Dps-like protein

Mycobacterium tuberculosis is a globally successful pathogen,infecting more than one third of total world's population. Thesebacteria have the remarkable ability to persist in the hostfor long periods of time unrecognized by the immune system andthen to re-emerge later in life causing the disease. The physiologyof such persistent or dormant bacilli is not very well characterized.Some evidence suggests that the dormant bacilli survive in anutrient-deprived state that is similar to the stationary phaseof the bacteria with respect to gene expression and physiology.Under this assumption we have studied the survival of Mycobacteriumsmegmatis in carbon starvation conditions as a model for mycobacterialpersistence. M.smegmatis, being a fast-growing strain, servesas a good model to study starvation responses. Using the two-dimensionalelectrophoresis-based proteomics approach, we identified a proteinwhich was found to be expressed preferentially under starvationconditions. This protein is homologous to a family of proteinscalled Dps (DNA binding Protein from Starved cells) that areknown to protect DNA under various kinds of environmental stressesand its existence has, so far, not been reported in mycobacteria.Upon expression and purification of this protein, we observedthat it has non-specific DNA-binding ability. Formation of acage-like dodecamer structure is a characteristic feature ofDps. Using comparative modelling we were able to show that Dpsfrom M.smegmatis could form a dodecamer structure similar tothe crystal structure of Dps from Escherichia coli.     

Microcalorimetric study of the self-discharge of the NiOOH/Ni(OH)2 electrode in a hydrogen environment

A microcalorimetric method has been used to investigate the self-discharge behaviour of nickel oxyhydroxide electrodes in a pressurized gaseous hydrogen environment. It was found that the heat generation rate is proportional to hydrogen pressure, and is significantly dependent on the immersion state of the electrode in the electrolyte. Hence, diffusion of dissolved hydrogen gas towards or within the electrode controls, at least partially, the self-discharge rate. However, the heat generation decreases exponentially with time, indicating that self-discharge is also proportional to the amount of the charged active material available for the reaction. The presence of Mg, Co and Cd oxides or hydroxides appears to inhibit self-discharge. It was found that direct chemical reaction between dissolved hydrogen and the active material dominates, while in addition, electrochemical oxidation of hydrogen coupled with electrochemical reduction of the active material might also occur at a much smaller rate than the direct reaction.