Kinetics of emitted mass—A study with three dry powder inhaler devices

The purpose of this study was to understand the kinetics of emptying of micronised salbutamol sulphate (SS) and lactohale 300 (LH300) under varying air flow rates (30–180 L min⁻¹) from three dry powder inhaler devices, Rotahaler^® (RH), Monodose Inhaler^® (MI) and Handihaler^® (HH). Aerosol concentration vs. time profiles, determined through real-time laser diffraction particle sizing, demonstrated that the majority of the powder from RH was emitted within one second while a more prolonged aerosolisation was observed from MI and HH. Peak aerosol concentrations were achieved more rapidly from RH compared to MI for both SS and LH300. Calculated cumulative emitted mass (CCEM) vs. time profiles were obtained from the aerosol concentration vs. time profiles and the emitted mass and the rate of CCEM (k_CCEM), estimated from a modelling approach, increased with increasing air flow rates. The k_CCEMvs. air flow rate profiles of SS and LH300 were significantly different at high air flow rates. The k_CCEM was highest from RH and lowest from MI. Differences in k_CCEM between the devices were related to capsule aperture size while the differences between the materials were due to the powder bed structure. This approach provided an understanding of the rate at which powder mass emptied from dry powder inhaler devices and was proposed to be a powerful development tool for the future powder inhalers.     

Synthesis of Polycarbonate Precursors over Titanosilicate Molecular Sieves

A novel catalytic application of titanosilicate molecular sieves (TS-1 and TiMCM-41), in the synthesis of polycarbonate precursors like cyclic carbonates and dimethyl and diphenyl carbonates, avoiding toxic chemicals like phosgene or CO, is reported. Cyclic carbonates were prepared, over TS-1 and TiMCM-41, in high yields, by cycloaddition of CO₂ to epoxides, like epichlorohydrin, propylene oxide and styrene oxide, at low temperatures and pressures. Further, transesterification of the cyclic carbonates with methanol and phenol, over TiMCM-41, yielded other polycarbonate precursors like dimethyl carbonate (DMC) and diphenyl carbonate (DPC). The cyclic carbonates could also be synthesized from the olefins in the same reactor by reacting the olefins, in the presence of TiMCM-41, with a mixture of an epoxidizing agent (like H₂O₂ or tert-butyl hydroperoxide) and CO₂.     

Heat and mass transfer effects on MHD flow of a couple‐stress fluid in a horizontal wavy channel with viscous dissipation and porous medium

This paper looks at heat and mass transfer effects on an unsteady MHD flow of a couple‐stress fluid in a horizontal wavy porous space with travelling thermal waves in the presence of a heat source and viscous dissipation. Initially the temperatures of the walls are maintained at different constant temperatures. The analytical expressions for velocity, temperature, and concentration field are obtained by the regular perturbation technique. The results are presented graphically for various values of emerging dimensionless parameters of the problem and are discussed to show interesting aspects of the solution. © 2013 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library (wileyonlinelibrary.com/journal/htj). DOI 10.1002/htj.21040 PACS: 44.15.+a, 44.30.+f, 44.27.nd, 47.50.Cd     

Behaviour of organised disturbances in fully developed turbulent channel flow

In our earlier work we have shown the relevance of stability theory in understanding the sustenance of turbulence in turbulent boundary layers. Here we adopt the same model to study the evolution of organised disturbances in turbulent channel flow. Since the dominant modes are wall modes we find that the stability characteristics in the two flows are nearly identical although the boundary conditions (at the edge of the boundary layer and at the centre of the channel) are different. Comparisons with the experiments of Hussain and Reynolds are also presented.     

Effects of DC testing on AC breakdown strength of XLPE insulatedcables subjected to laboratory accelerated aging

The results of a study performed on crosslinked polyethylene (XLPE) insulated cables tested in the laboratory under accelerated conditions are described. URD-type cables rated at 15 kV were aged at 60 Hz, 6 kV/mm, (150 V/mil) and load cycled daily to 90°C conductor, with water inside the pipe and outside of the samples, for periods of up to 3 years. DC testing was performed before and during the aging. An anticipated significant reduction in the AC breakdown strength is observed in control cables (not DC tested), from 44 kV/mm (1100 V/mil) for unaged cables, to 10 kV/mm (250 V/mil), for aged cables. However, there was no further reduction in the AC breakdown strength of cables subjected to DC testing as compared to those that are not tested with DC. It is concluded that AC breakdown strength is not an effective diagnostic tool for determining the effect of DC testing of URD cables aged under the conditions described     

Lack of effect of food on the steady state pharmacokinetics of BMS-181101, an antidepressant, in healthy subjects

An annual atmospheric pollen survey was performed for 14 consecutive years in the autumn at Sakado city, Saitama prefecture. The survey was performed on the transition of pollen dispersion of major allergen plants: ragweed (Ambrosia spp.), Humulus japonicus, Artemisia spp. and Gramineae. 1. Annual total pollen count of ragweed showed marked increases beginning from 1991. Total pollen count in 1991 was 8.8 times and that in 1996 was 18.6 times that in 1983. This increase is probably caused by marked proliferation of giant ragweed which is left without mowing as it is on a dry riverbed, and consequently produces much more pollen than short ragweed. 2. Annual increases in total pollen counts of other major plants which disperse their pollen in the same season as ragweed were 0.95 times in 1991 and 0.5 times in 1996 that in 1983 for Humulus japonicus, 0.68 times in 1991 and 1.5 times in 1996 that in 1983 for Artemisia spp. and 1.3 times in 1991 and 1.4 times in 1996 that in 1983 for Gramineae. None of these species showed a marked increase of pollen dispersion although they showed some annual variation. The above findings suggest that changes in the proliferous state of various allergenic plants due to environmental change should be considered with respect to characteristics of pollen allergy.