铝酸钙水泥、硅酸盐水泥和β-半水石膏混合物中钙矾石的膨胀性能

本文利用现场同步加速X-射线衍射、等温量热仪和膨胀测量等手段,研究了在20℃,100%相对湿度下,由25%(重量比)的铝酸钙水泥、12.5%的硅酸盐水泥、12.5%的β-半水石膏和50%的水组成的浆体的水化。水化伊始,首先形成了石膏和钙矾石,同时半水石膏也相应消耗(0-45min内)。随后石膏继续消耗,钙矾石持续形成,2h45min后石膏消耗完毕,铝酸盐-AFm开始形成,同时钙矾石的数量在7h内保持不变。热曲线的第一个峰源自机械搅拌、初始润湿和溶解,还有钙矾石和石膏的形成,第二个峰为石膏被钙矾石所替代,第三个对应于铝酸盐-AFm的形成。石膏被钙矾石替代伴随着0.7%平均线性膨胀。     

Smoke detectors in apartments and one-family houses: Fire risk, property loss and the presence of smoke detectors

This study compared the changes in fire risks and average monetary compensation for property loss before and after the distribution of 21 000 free home smoke detectors from a local insurance company. Life safety and injuries to people were not considered. To control for changes that were not due to the large increase in smoke detector coverage, a second insurance company in the same geographical area was added as a comparison, or control group. Average monetary compensation and fire risks were compared for small, medium-sized and heavy fires. The results showed no general effect of the sharp increase in smoke detector coverage on fire risk and compensation paid by the insurance companies. For the heavy fires, though not for the small and medium-sized fires, there was a significant decrease in compensation paid by the company with the free smoke detector. The reduction in compensation paid was small compared to the yearly costs of the batteries for the smoke detectors. The results were discussed in terms of smoke detectors as a technical device and a self-selection of fire safety conscious persons to the group that install a smoke detector in their homes.     

Phytoplankton in a polluted subarctic lake before and after nutrient reduction

Phytoplankton and water chemistry were studied in a eutrophic subarctic Swedish lake before and after nutrient reduction. Pollution started in 1964 and the lake had received about 4.5 tons of phosphorus by the time the treatment plant was built in 1974. After that only 18–20 kg P yr^?1 entered the lake. Before nutrient reduction the phytoplankton consisted principally of three species, Dictyosphaerium pulchellum var. minutum, Chromulina cv. darlecarlica and Cryptomonas cv. ovata. Two years after the P-load was reduced Chlamydomonas spp and Mallomonas akrokomos predominated in the plankton and their dominance has been maintained during the period of study. Seasonal average phytoplankton biomass decreased from 11.2 g m^?3 in 1973 to 2.9 g m^?3 in 1980. Average seasonal total phosphorus concentrations decreased from 168 μgl^?1 in 1973 to 74 μgl^?1 in 1980. Average Secchi depth readings increased from 1.3 m in 1973 to 2.1 m in 1980. Blue-green algae never had any quantitative importance in the lake and no blooms were observed.     

Inclusions,Stress Concentrations and Surface Condition in Bending Fatigue of an H13 Tool Steel

Combined effects of inclusions, surface condition and geometrical stress concentration on the fatigue strength of a tool steel have been studied. Bending fatigue testing was performed for milled tool components and smooth specimens produced from an experimental AISI H13 tool steel with varying additions of sulphur and oxygen. Inclusion distributions of the different test series were determined. Fracture surfaces after fatigue failures were studied in a scanning electron microscope. The sulphur content does not have a significant influence on the fatigue strength of the milled tool components in the range of 0.02 ‐ 0.09 wt%. A clear reduction in the fatigue strength is obtained for the smooth specimens when the steel becomes rich in inclusions. Here, the oxide type inclusions dominated as crack initiators and the effect of sulphides was smaller. The results demonstrate the reduced effect of inclusions on the fatigue strength in components with large stress concentrations and rough surfaces.     

Nanoparticle-based continuous full filling capillary electrochromatography/electrospray ionization-mass spectrometry for separation of neutral compounds

Highly efficient reversed-phase capillary electrochromatography (CEC) separations (plate numbers up to 700 000/m), with electrospray ionization mass spectrometry detection were achieved utilizing novel dextran-coated polymer nanoparticles as a pseudostationary phase. A continuous full filling (CFF) technique in which nanoparticles are continuously introduced into the capillary was employed for separation of neutral analytes (dialkyl phthalates), utilizing an orthogonal electrospray interface to prevent nanoparticles from entering the mass spectrometer. CFF-CEC benefits from that an entirely fresh column is employed for every analysis, avoiding carryover effects associated with stationary-phase contamination. The highly efficient separations obtained were accomplished by optimizing the organic modifier concentration in the electrolyte and by using a high nanoparticle concentration (5 mg/mL), to improve interparticle mass transfer and gain sufficient retention. Nanoparticles, with an average diameter of 600 nm, were prepared by polymerization of methacrylic acid and trimethylolpropane trimethacrylate, which in turn were coated with dextran. These nanoparticles formed stable suspensions in electrolytes having broad ranges of polarities, enabling straightforward optimization of the reversed-phase conditions.     

An investigation of particle deposition mechanisms during impregnation of dual‐scale fabrics with micro particle image velocimetry

Injection moulding processing of composite materials most often includes infiltration of a thermoset resin into a multi‐scale porous fabric. Controlling the fluid flow within the multi‐scale fabric is essential for the quality of the final composite material, since the transport of fluid between regions with different scales is of importance for phenomena such as void formation and filtration of particle doped resins. Hence, the transient flow behaviour in dual scale porous media is investigated in detail with Micro Particle Image Velocimetry. These experiments show that the fluid transport between the two scales can be controlled by the injection velocity. Validation of the measured velocity fields furthermore shows excellent agreement with theory and that transport between the two scales can be substantial at the flow front but negligible up‐stream it. POLYM. COMPOS., 31:1232–1240, 2010. © 2009 Society of Plastics Engineers     

Hepatic and Adipose Tissue Depot-Specific Changes in Lipid Metabolism in Late-Onset Obese (LOB) Rats

Transgenic Late-onset OBesity (LOB) rats slowly develop a male-specific, autosomal dominant, obesity phenotype with a specific increase in peri-renal white adipose tissue (WAT) depot and preserved insulin sensitivity (Bains et al. in Endocrinology 145:2666–2679, 2004). To better understand the remarkable phenotype of these rats, the lipid metabolism was investigated in male LOB and non-transgenic (NT) littermates. Total plasma cholesterol (C) levels were normal but total plasma triacylglycerol (TAG) (2.8-fold) and hepatic TAG content (25%) was elevated in LOB males. Plasma VLDL-C and VLDL-TAG levels were higher while plasma apoB levels were 60% lower in LOB males. Increased hepatic TAG secretion explained the increased VLDL levels in LOB males. The hepatic gene expression of FAS, SCD-1, mitochondrial (mt)GPAT, and DGAT2 was up-regulated in both old obese and young non-obese LOB rats. Lipoprotein lipase (LPL) activity in heart and epididymal white adipose tissue (WAT) was unchanged, while LPL activity was increased in peri-renal WAT (30%) and decreased in soleus muscle (40%). Moreover, FAS, SCD-1 and DGAT2 gene expression was increased in peri-renal, but not in epididymal WAT. Basal lipolysis was reduced or unchanged and β-adrenergic stimulated lipolysis was reduced in WAT from both old obese and young non-obese LOB rats. To summarize, the obese phenotype of LOB male rats is associated with increased hepatic TAG production and secretion, a shift in LPL activity from skeletal muscle to WAT, reduced lipolytic response in WAT depots and a specific increase in expression of genes responsible for fatty acid and TAG synthesis in the peri-renal depot. F. Frick and R. Hume contributed equally to this work.     

CFD simulation of the high shear mixing process using kinetic theory of granular flow and frictional stress models

In order to enhance process understanding and to develop predictive process models in high shear granulation, there is an ongoing search for simulation tools and experimental methods to model and measure the velocity and shear fields in the mixer. In this study, the Eulerian-Eulerian approach to model multiphase flows has been used to simulate the mixer flow. Experimental velocity profiles for the solid phase at the wall in the mixer have been obtained using a high speed camera following the experimental procedure as described by Darelius et al. [2007a. Measurement of the velocity field and frictional properties of wet masses in a high shear mixer. Chemical Engineering Science, 62, 2366-2374]. The governing equations for modelling the dense mixer flow have been closed by using closure relations from the kinetic theory of granular flow (KTGF) combined with frictional stress models. The free slip and partial slip boundary conditions for the solid phase velocity at the vessel wall have been utilized. The partial slip model originally developed for dilute flows by Tu and Fletcher [1995. Numerical computation of turbulent gas-solid particle flow in a 90^° bend. A.I.Ch.E. Journal, 41, 2187-2197] has been employed. It was found that the bed height could be well predicted by implementing the partial slip model, whereas the free slip model could not capture the experimentally found bed height satisfactorily. In the simulation, the swirling motion of the rotating torus formed was over-predicted and the tangential wall velocity was under-predicted, probably due to the fact that the frictional stress model needs to be further developed, e.g. to tackle cohesive particles in dense flow. The advantage of using the Eulerian-Eulerian approach compared to discrete element methods is that there is no computational limitation on the number of particles being modelled, and thus manufacturing scale granulators can be modelled as well.     

How Do People with Disabilities Consider Fire Safety and Evacuation Possibilities in Historical Buildings?—A Swedish Case Study

An exploratory focus group study of people with different types of disabilities, e.g. mobility, visual and auditory, was carried out to explore how evacuation safety in historical buildings can be improved for people with various disabilities. Accounts of real life experiences on how well evacuation routes in historical buildings are adapted to people with different types of disabilities, as well as suggestions for safety enhancing measures, were collected. Some examples of reported problems were level differences on the way to and in evacuation routes for people with mobility impairments. Other examples were problems with orientation for people with visual disabilities and problems with detecting the evacuation alarm signal for people with auditory disabilities. In general the participants expressed different problems and needs depending on their type of disability. A common view amongst all the participants were that organizational parameters concerning evacuation of people with disabilities have to be improved. One conclusion from the study was that there are shortcomings in the physical environment as well as in the organization of evacuation in historical buildings today. This means that emergency evacuation safety must be properly focused on when improving accessibility in historical buildings. Measures must be taken to address the different needs of people with various types of disabilities as well as to make improvements for all user groups.