Ultra-dense planar metallic nanowire arrays with extremely large anisotropic optical and magnetic properties

A nanofabrication method for the production of ultra-dense planar metallic nanowire arrays scalable to wafer-size is presented. The method is based on an efficient template deposition process to grow diverse metallic nanowire arrays with extreme regularity in only two steps. First, III–V semiconductor substrates are irradiated by a low-energy ion beam at an elevated temperature, forming a highly ordered nanogroove pattern by a “reverse epitaxy” process due to self-assembly of surface vacancies. Second, diverse metallic nanowire arrays (Au, Fe, Ni, Co, FeAl alloy) are fabricated on these III–V templates by deposition at a glancing incidence angle. This method allows for the fabrication of metallic nanowire arrays with periodicities down to 45 nm scaled up to wafer-size fabrication. As typical noble and magnetic metals, the Au and Fe nanowire arrays produced here exhibited large anisotropic optical and magnetic properties, respectively. The excitation of localized surface plasmon resonances (LSPRs) of the Au nanowire arrays resulted in a high electric field enhancement, which was used to detect phthalocyanine (CoPc) in surface-enhanced Raman scattering (SERS). Furthermore, the Fe nanowire arrays showed a very high in-plane magnetic anisotropy of approximately 412 mT, which may be the largest in-plane magnetic anisotropy field yet reported that is solely induced via shape anisotropy within the plane of a thin film.

Open image in new window

     

Investigation of charge carrier depletion in freestanding nanowires by a multi-probe scanning tunneling microscope

Profiling of the electrical properties of nanowires (NWs) and NW heterocontacts with high spatial resolution is a challenge for any application and advanced NW device development. For appropriate NW analysis, we have established a four-point prober, which is combined in vacuo with a state-of-the-art vapor-liquid-solid preparation, enabling contamination-free NW characterization with high spatial resolution. With this ultrahigh-vacuum-based multi-tip scanning tunneling microscopy (MT-STM), we obtained the resistance and doping profiles of freestanding NWs, along with surface-sensitive information. Our in-system 4-probe STM approach decreased the detection limit for low dopant concentrations to the depleted case in upright standing NWs, while increasing the spatial resolution and considering radial depletion regions, which may originate from surface changes. Accordingly, the surface potential of oxide-free GaAs NW {112} facets has been estimated to be lower than 20 mV, indicating a NW surface with very low surface state density.

Open image in new window

     

Hypothermic coagulopathy in trauma: effect of varying levels of hypothermia on enzyme speed, platelet function, and fibrinolytic activity

Comparative study of protein metabolism in neurons of layers III and V of the sensorimotor cortex was carried out in two groups of Wistar rats, which differed in learning results: "bad" (60% of population) and "good" learners (40%). It was found out that the associative neurons (layer III) were most sensitive to cognitive load. In "bad" learners, an increase in nuclear and cytoplasmic dimensions and rise in protein concentration and content took place in these neurons, while in the efferent neurons (layer V) the protein content increased only in the cytoplasm. In "good" learners, the cognitive load led to a decrease in all the cytochemical parameters in neurons of the layer III while in the neurons of the layer V the content and concentration of proteins increased both in nuclei and cytoplasm. It is suggested that the character of protein metabolism changes produced by information load can be considered as a reflection of individual peculiarities of cognitive activity, and the extent of cytochemical changes as a reflection of complicity of a cognitive task.     

Measurement of transient deformations with dual-pulse addition electronic speckle-pattern interferometry

We describe an electronic speckle-pattern interferometry system for analyzing addition fringes generated by the transient deformation of a test object. The system is based on a frequency-doubled twin Nd:YAG laser emitting dual pulses at a TV camera field rate (50 Hz). The main advance has been the automatic, quantitative analysis of dual-pulse addition electronic speckle-pattern interferometry data by the introduction of carrier fringes and the application of Fourier methods. The carrier fringes are introduced between dual pulses by a rotating mirror that tilts the reference beam. The resulting deformation-modulated addition fringes are enhanced with a deviation filter, giving fringe visibility close to that of subtraction fringes. The phase distribution is evaluated with a Fourier-transform method with bandpass filtering. From the wrapped phase distribution, a continuous phase map is reconstructed with an iterative weighted least-squares unwrapper. Preliminary results for a thin plate excited by an acoustic shock show the suitability of the system for the quantitative evaluation of transient deformation fields.     

Unwrapping of Digital Speckle-Pattern Interferometry Phase Maps by use of a Minimum L(0)-Norm Algorithm

The performance of a minimum L(0)-norm unwrapping algorithm is investigated by use of synthetic digital speckle-pattern interferometry (DSPI) wrapped phase maps that simulate experimentally obtained data. This algorithm estimates its own weights to mask inconsistent pixels. Particular features usually included in DSPI wrapped phase distributions, such as shears, speckle noise, fringe cuts, object physical limits, and superimposed phase maps, are analyzed. Some adequate approaches to solving these features are discussed. Finally, it is shown that a complex case in which shears and fringe cuts coexist in the wrapped phase cannot be solved satisfactorily with the minimum L(0)-norm algorithm by itself. To cope with this problem, we propose a new scheme.     

Toward a theory of managing creativity-intensive processes: a creative industries study

This paper reports the results of an exploratory, theory-building study on the impact of creativity on business processes, their management, and the use of information technology (IT) in particular. The empirical evidence was derived from organizations within the creative industries, specifically film and visual effects (VFX) production. An adapted grounded theory approach was employed in order to analyze the data. The study identifies the dynamics of business processes that can be described as highly dependent on creativity, intensively involving the client, complex, and interdependent. It explains the processes’ organizational context as well as strategies and IT systems that organizations use in order to manage these processes. The study suggests that creativity-intensive processes are characterized by high levels of uncertainty with regard to outcome, process structure, and required resources. Creative organizations pursue both creative and operational process performance while simultaneously mitigating creative and operational risk.     

Nested multigrid methods for time-periodic,parabolic optimal control problems

We present a nested multigrid method to optimize time-periodic, parabolic, partial differential equations (PDE). We consider a quadratic tracking objective with a linear parabolic PDE constraint. The first order optimality conditions, given by a coupled system of boundary value problems can be rewritten as an Fredholm integral equation of the second kind, which is solved by a multigrid of the second kind. The evaluation of the integral operator consists of solving sequentially a boundary value problem for respectively the state and the adjoints. Both problems are solved efficiently by a time-periodic space-time multigrid method.     

Non-standard bone simulation: interactive numerical analysis by computational steering

Numerous numerical methods have been developed in an effort to accurately predict stresses in bones. The largest group are variants of the h-version of the finite element method (h-FEM), where low order Ansatz functions are used. By contrast, we3 investigate a combination of high order FEM and a fictitious domain approach, the finite cell method (FCM). While the FCM has been verified and validated in previous publications, this article proposes methods on how the FCM can be made computationally efficient to the extent that it can be used for patient specific, interactive bone simulations. This approach is called computational steering and allows to change input parameters like the position of an implant, material or loads and leads to an almost instantaneous change in the output (stress lines, deformations). This direct feedback gives the user an immediate impression of the impact of his actions to an extent which, otherwise, is hard to obtain by the use of classical non interactive computations. Specifically, we investigate an application to pre-surgical planning of a total hip replacement where it is desirable to select an optimal implant for a specific patient. Herein, optimal is meant in the sense that the expected post-operative stress distribution in the bone closely resembles that before the operation.     

Optimization problems in contracted tensor networks

We discuss the calculus of variations in tensor representations with a special focus on tensor networks and apply it to functionals of practical interest. The survey provides all necessary ingredients for applying minimization methods in a general setting. The important cases of target functionals which are linear and quadratic with respect to the tensor product are discussed, and combinations of these functionals are presented in detail. As an example, we consider the representation rank compression in tensor networks. For the numerical treatment, we use the nonlinear block Gauss?CSeidel method. We demonstrate the rate of convergence in numerical tests.     

A Multidirectional Occlusion Shading Model for Direct Volume Rendering

In this paper, we present a novel technique which simulates directional light scattering for more realistic interactive visualization of volume data. Our method extends the recent directional occlusion shading model by enabling light source positioning with practically no performance penalty. Light transport is approximated using a tilted cone‐shaped function which leaves elliptic footprints in the opacity buffer during slice‐based volume rendering. We perform an incremental blurring operation on the opacity buffer for each slice in front‐to‐back order. This buffer is then used to define the degree of occlusion for the subsequent slice. Our method is capable of generating high‐quality soft shadowing effects, allows interactive modification of all illumination and rendering parameters, and requires no pre‐computation.