Robust Fabrication of Nonstick,Noncorrosive, Conductive Graphene‐Coated Liquid Metal Droplets for Droplet‐Based,Floating Electrodes

Nontoxic liquid metals (conductive materials in a liquid state at room temperature) are an emerging class of materials for applications ranging from soft electronics and robotics to medical therapy and energy devices. Their sticky and corrosive properties, however, are becoming more of a critical concern for circuits and devices containing other metals as these are easily destroyed or contaminated by the liquid metals. Herein, a feasible method for fabricating highly conductive graphene‐coated liquid metal (GLM) droplets is reported and their application as nonstick, noncorrosive, movable, soft contacts for electrical circuits is demonstrated. The as‐prepared GLM droplets consist of a liquid‐phase soft core of liquid metal and a slippery outer layer of graphene sheets. These structures address the issue of simultaneous control of the wettability and conductivity of a soft electronic contact by combining extraordinary properties, i.e., nonstick, noncorrosive, yet exhibiting high electronic conductivity while in contact with metal substrates, e.g., Au, Cu, Ag, and Ni. As proof‐of‐concept, the as‐prepared GLM droplets are demonstrated as floating electrodes for movable, recyclable electronic soft contacts in electrical circuits.     

Accelerated development of CuSbS2 thin film photovoltaic device prototypes

Development of alternative thin film photovoltaic technologies is an important research topic because of the potential of low‐cost, high‐efficiency solar cells to produce terawatt levels of clean power. However, this development of unexplored yet promising absorbers can be hindered by complications that arise during solar cell fabrication. Here, a high‐throughput combinatorial method is applied to accelerate development of photovoltaic devices, in this case, using the novel CuSbS₂ absorber via a newly developed three‐stage self‐regulated growth process to control absorber purity and orientation. Photovoltaic performance of the absorber, using the typical substrate CuIn_xGa_{1 − x}Se₂ (CIGS) device architecture, is explored as a function of absorber quality and thickness using a variety of back contacts. This study yields CuSbS₂ device prototypes with ~1% conversion efficiency, suggesting that the optimal CuSbS₂ device fabrication parameters and contact selection criteria are quite different than for CIGS, despite the similarity of these two absorbers. The CuSbS₂ device efficiency is at present limited by low short‐circuit current because of bulk recombination related to defects, and a small open‐circuit voltage because of a theoretically predicted cliff‐type conduction band offset between CuSbS₂ and CdS. Overall, these results illustrate both the potential and limits of combinatorial methods to accelerate the development of thin film photovoltaic devices using novel absorbers. Copyright © 2016 John Wiley & Sons, Ltd.     

A Study on the Feasibility of Measuring the Emissivity with the Laser-Flash Method

The laser-flash method is a fast, widely used and well established technique to measure the thermal diffusivity. Since its introduction in the 1960s, it was proposed to expand this technique to the measurement of heat capacity and emissivity. Currently, the measurement of spectral emissivity at high temperatures is connected with relatively large uncertainties, although the spectral emissivity is an essential parameter for applications, e.g., in the lamp industry and fusion research. In this work, a theoretical study is presented on the possibility of emissivity measurements using the laser-flash method. Two mathematical approaches are discussed which solve the problem, that a measured temperature rise—necessary to calculate the emissivity—itself depends on the emissivity. It is shown that both methods have a negligible arithmetic error, making them applicable to be used in future work.     

p‐TCOs für Transparente Elektronik

p‐type TCOs for use in transparent electronics In this article, a new type of semiconducting material is introduced. Transparent conducting thin films are already established in our everydaylife. But the type of these so‐called ?TCOs”? is dominated by electron transport, that means they are n‐type. To get transparent p‐n‐junctions and therefore transparent electronics, the missing part is a transparent p‐type material. Researchers all over the world have found different approach to produce this new generation of materials. At the Fraunhofer Institute for Surface Engineering and Thin Films (IST) in Braunschweig it is now possible to produce these kind of thin films as well.     

Statistical modeling of global geogenic arsenic contamination in groundwater

Contamination of groundwaters with geogenic arsenic poses a major health risk to millions of people. Although the main geochemical mechanisms of arsenic mobilization are well understood, the worldwide scale of affected regions is still unknown. In this study we used a large database of measured arsenic concentration in groundwaters (around 20,000 data points) from around the world as well as digital maps of physical characteristics such as soil, geology, climate, and elevation to model probability maps of global arsenic contamination. A novel rule-based statistical procedure was used to combine the physical data and expert knowledge to delineate two process regions for arsenic mobilization: "reducing" and "high-pH/ oxidizing". Arsenic concentrations were modeled in each region using regression analysis and adaptive neuro-fuzzy inferencing followed by Latin hypercube sampling for uncertainty propagation to produce probability maps. The derived global arsenic models could benefit from more accurate geologic information and aquifer chemical/physical information. Using some proxy surface information, however, the models explained 77% of arsenic variation in reducing regions and 68% of arsenic variation in high-pH/oxidizing regions. The probability maps based on the above models correspond well with the known contaminated regions around the world and delineate new untested areas that have a high probability of arsenic contamination. Notable among these regions are South East and North West of China in Asia, Central Australia, New Zealand, Northern Afghanistan, and Northern Mali and Zambia in Africa.     

Resistance patterns of Campylobacter spp. strains isolated from poultry carcasses in a big Swiss poultry slaughterhouse

The aim of this study was to determine resistance patterns of strains of Campylobacter spp. isolated from poultry carcasses in one of the two big Swiss poultry slaughterhouses. A variety of antibiotics with clinical relevance in human and/or in veterinary medicine was tested. In addition, the results of the disc diffusion method, E-test and microdilution broth methods were compared. Of the 195 Campylobacter jejuni strains isolated from 195 poultry carcasses from 21 flocks, 134 strains were susceptible in vitro to all tested antibiotics. Sixty-one strains (31.3%, from eight flocks) showed resistance. Forty-one strains were resistant to a single antibiotic-34 to streptomycin, 6 to ampicillin and 1 to ciprofloxacin. Eighteen strains (from two flocks) showed combined resistance to erythromycin and streptomycin, two strains to ciprofloxacin and streptomycin. None of the isolates was resistant to tetracycline. The data of this first study in Switzerland show a favourable resistance situation for C. jejuni strains against erythromycin, tetracycline and ciprofloxacin. The disc diffusion method was found to be a reliable and easy tool for monitoring the prevalence of resistant C. jejuni strains. For surveillance of changes in the susceptibility concentration levels to antimicrobial agents, however, a MIC method should be used. Further investigations along the whole poultry production chain (farm, slaughterhouse and retail levels) are now necessary in order to confirm the resistance situation.     

Distribution and identification of culturable airborne microorganisms in a Swiss milk processing facility

Airborne communities (mainly bacteria) were sampled and characterized (concentration levels and diversity) at 1 outdoor and 6 indoor sites within a Swiss dairy production facility. Air samples were collected on 2 sampling dates in different seasons, one in February and one in July 2012 using impaction bioaerosol samplers. After cultivation, isolates were identified by mass spectrometry (matrix-assisted laser desorption/ionization-time-of-flight) and molecular (sequencing of 16S rRNA and rpoB genes) methods. In general, total airborne particle loads and total bacterial counts were higher in winter than in summer, but remained constant within each indoor sampling site at both sampling times (February and July). Bacterial numbers were generally very low (<100 cfu/m³ of air) during the different steps of milk powder production. Elevated bacterial concentrations (with mean values of 391 ± 142 and 179 ± 33 cfu/m³ of air during winter and summer sampling, respectively; n = 15) occurred mainly in the “logistics area,” where products in closed tins are packed in secondary packaging material and prepared for shipping. However, total bacterial counts at the outdoor site varied, with a 5- to 6-fold higher concentration observed in winter compared with summer. Twenty-five gram-positive and gram-negative genera were identified as part of the airborne microflora, with Bacillus and Staphylococcus being the most frequent genera identified. Overall, the culturable microflora community showed a composition typical and representative for the specific location. Bacterial counts were highly correlated with total airborne particles in the size range 1 to 5 µm, indicating that a simple surveillance system based upon counting of airborne particles could be implemented. The data generated in this study could be used to evaluate the effectiveness of the dairy plant’s sanitation program and to identify potential sources of airborne contamination, resulting in increased food safety.