Comparing orthogonal force and unidirectional strain component processing for tool condition monitoring

Signal processing using orthogonal cutting force components for tool condition monitoring has established itself in literature. In the application of single axis strain sensors however a linear combination of cutting force components has to be processed in order to monitor tool wear. This situation may arise when a single axis piezoelectric actuator is simultaneously used as an actuator and a sensor, e.g. its vibration control feedback signal exploited for monitoring purposes. The current paper therefore compares processing of a linear combination of cutting force components to the reference case of processing orthogonal components. Reconstruction of the dynamic force acting at the tool tip from signals obtained during measurements using a strain gauge instrumented tool holder in a turning process is described. An application of this dynamic force signal was simulated on a filter-model of that tool holder that would carry a self-sensing actuator. For comparison of the orthogonal and unidirectional force component tool wear monitoring strategies the same time-delay neural network structure has been applied. Wear-sensitive features are determined by wavelet packet analysis to provide information for tool wear estimation. The probability of a difference less than 5 percentage points between the flank wear estimation errors of above mentioned two processing strategies is at least 95 %. This suggests the viability of simultaneous monitoring and control by using a self-sensing actuator.     

Effects Of Ozone On The Production Of Biodegradable Dissolved Organic Carbon (BDOC) During Water Treatment

This article deals with the oxidation effect of ozone on the increasing fraction of biodegradable organic matter with the “ozotest” method, a laboratory technique which simulates the effect of ozonation and allows a complete oxidation assessment. Ozone treatment was performed on river water samples and sand filter effluent samples. Ozone consumption, reduction of UV absorbance and BDOC formation were monitored with applied ozone doses from 0 to 10 mg/L and with contact times from 0 to 60 min. The BDOC formation was optimum at an applied ozone dose of 0.25-0.5 mg O₃ per mg DOC (contact time = 5 min) corresponding to apparition of traces of residual ozone and maximum UV reduction. Maximum ozone consumption, UV reduction and BDOC formation occurred simultaneously during the first two minutes of treatment. Concerning BDOC formation, applied ozone dose showed a greater effectiveness than contact time. For the same quantity of consumed ozone, a short contact time associated with a high ozone dose was preferable to a long contact time and a low ozone dose.     

New inhibitors of the Tat-TAR RNA interaction found with a "fuzzy" pharmacophore model

TAR RNA is a potential target for AIDS therapy. Ligand-based virtual screening was performed to retrieve novel scaffolds for RNA-binding molecules capable of inhibiting the Tat-TAR interaction, which is essential for HIV replication. We used a "fuzzy" pharmacophore approach (SQUID) and an alignment-free pharmacophore method (CATS3D) to carry out virtual screening of a vendor database of small molecules and to perform "scaffold-hopping". A small subset of 19 candidate molecules were experimentally tested for TAR RNA binding in a fluorescence resonance energy transfer (FRET) assay. Both methods retrieved molecules that exhibited activities comparable to those of the reference molecules acetylpromazine and chlorpromazine, with the best molecule showing ten times better binding behavior (IC50 = 46 microM). The hits had molecular scaffolds different from those of the reference molecules.     

Photoresponsive dendritic azobenzene peptides

Two dendritic peptides containing a branched lysine core and up to eight azobenzene moieties in the periphery were synthesized on solid support employing the omega-amino acid 4-(aminomethyl)phenylazobenzoic acid. With an additional peptidic tail consisting of an oligolysine portion, water solubility was achieved for the dendrimers, which allowed for the characterization of the cis/trans photoisomerization of the dendritic azobenzene species in both organic and aqueous media. Despite the interactions between the chromophores, which occur particularly in aqueous media, at higher dilution the photoisomerization process was found to proceed to extents that should permit photomodulation of molecular recognition processes between ligands grafted to the photosensitive azobenzene units and receptor molecules.     

Automatic learners with feedback queries

Automatic classes are classes of languages for which a finite automaton can decide whether a given element is in a set given by its index. The present work studies the learnability of automatic families by automatic learners which, in each round, output a hypothesis and update a long-term memory, depending on the input datum, via an automatic function. Many variants of automatic learners are investigated: where the long-term memory is restricted to be the current hypothesis whenever this exists, cannot be of length larger than the length of the longest datum seen, or has to consist of a constant number of examples seen so far. Learnability is also studied with respect to queries which reveal information about past data or past computation history; the number of queries per round is bounded by a constant.     

Ubicon and its applications for ubiquitous social computing

The combination of ubiquitous and social computing is an emerging research area which integrates different but complementary methods, techniques, and tools. In this paper, we focus on the Ubicon platform, its applications, and a large spectrum of analysis results. Ubicon provides an extensible framework for building and hosting applications targeting both ubiquitous and social environments. We summarize the architecture and exemplify its implementation using four real-world applications built on top of Ubicon. In addition, we discuss several scientific experiments in the context of these applications in order to give a better picture of the potential of the framework, and discuss analysis results using several real-world data sets collected utilizing Ubicon.     

7-(Dialkylamino)coumarin-4-yl]methyl-Caged Compounds as Ultrafast and Effective Long-Wavelength Phototriggers of 8-Bromo-Substituted Cyclic Nucleotides

[7-(Dimethylamino)coumarin-4-yl]methyl (DMACM) and [7-(diethylamino)coumarin-4-yl]methyl (DEACM) esters of 8-bromoadenosine 3',5'-cyclic monophosphate (8-Br-cAMP) and 8-bromoguanosine 3',5'-cyclic monophosphate (8-Br-cGMP) are described as novel caged compounds for 8-bromo-substituted cyclic nucleotides. Synthesis is accomplished by treatment of the free acids of the cyclic nucleotides with the corresponding 7(dialkylamino)-substituted 4(diazomethyl)coumarins. Irradiation of the DMACM- and DEACM-caged cyclic nucleotides with UV light stimulates the release of the cyclic nucleotides within roughly a nanosecond. The new caged compounds are resistant to hydrolysis in aqueous buffers and exhibit long-wavelength absorption properties with maxima at 400 nm, high extinction coefficients, and high quantum yields (0.15-0.31). Their favorable properties render these compounds the most efficient and rapid phototriggers of 8-bromo-substituted cyclic nucleotides known. The usefulness of the compounds for physiological studies under nondamaging light conditions was examined in HEK293 cells expressing the alpha subunit of the cyclic-nucleotide-gated (CNG) channel of cone photoreceptors (CNGA3) and of olfactory neurons (CNGA2) by using confocal laser scanning microscopy and the patch clamp technique.     

Practical Design Model for Calculating Bubble Diffuser Contactor Ozone Transfer Efficiency

Ozone transfer to water or wastewater is necessary before desirable, effective ozone reactions occur. Several factors affect ozone transfer efficiency, including water quality characteristics, contactor configuration, and applied ozone characteristics. The design model presented in this paper addresses all factors affecting ozone transfer. The model was used to compare measured transfer efficiency with predicted transfer efficiency at four full-scale wastewater ozone disinfection facilities. A relatively good prediction was obtained at each plant.

The paper presents an example calculation of ozone transfer efficiency. Also, the effect of changes to some of the factors affecting transfer efficiency is presented, such as changes in diffuser depth, plant elevation, ozone concentration, water quality (i.e., ozone demand), pH, detention time, temperature, and acombination of factors. The design model may be used to evaluate the effect of changes in plant design on transfer efficiency, but cannot provide an absolute value for transfer efficiency until difficult-to-measure parameters, such as bubble diameter, are known.     

Bridging the gap between formal semantics and implementation of triple graph grammars

The correctness of model transformations is a crucial element for model-driven engineering of high-quality software. A prerequisite to verify model transformations at the level of the model transformation specification is that an unambiguous formal semantics exists and that the implementation of the model transformation language adheres to this semantics. However, for existing relational model transformation approaches, it is usually not really clear under which constraints particular implementations really conform to the formal semantics. In this paper, we will bridge this gap for the formal semantics of triple graph grammars (TGG) and an existing efficient implementation. While the formal semantics assumes backtracking and ignores non-determinism, practical implementations do not support backtracking, require rule sets that ensure determinism, and include further optimizations. Therefore, we capture how the considered TGG implementation realizes the transformation by means of operational rules, define required criteria, and show conformance to the formal semantics if these criteria are fulfilled. We further outline how static and runtime checks can be employed to guarantee these criteria.