Search for Superconductivity in Ultra-dense Deuterium D(?1) at Room Temperature: Depletion of D(?1) at Field Strength >0.05 T

Ultra-dense deuterium D(?1) is expected to be both a superfluid and a superconductor as shown by recent theoretical research. Condensed D(?1) can be deposited on surfaces by a source which produces a stream of clusters. A magnetic field strongly influences the type of material formed. Very little of D(?1) and of the form D(1), which is strongly coupled to D(?1), exists on the magnet surface or within several mm from the magnet surface. Even the formation of D(?1) on the source emitter is strongly influenced by a magnetic field, with a critical field strength in the range 0.03?C0.07 T. Higher excitation levels D(2) and D(3) dominate in a magnetic field. The excitation level D(2) is now observed for the first time. The removal of D(?1) and D(1) in strong magnetic fields is proposed to be due to a Meissner effect in long D(?1) clusters by large-orbit electron motion. The lifting of long D(?1) clusters above the magnet surface is slightly larger than expected, possibly due to the coupling to D(1). The previously reported oscillation between D(?1) and D(1) in an electric field is proposed to be due to destruction of D(?1).     

Correcting for contact geometry in Seebeck coefficient measurements of thin film devices

Driven by promising recent results, there has been a revived interest in the thermoelectric properties of organic (semi)conductors. Concomitantly, there is a need to probe the Seebeck coefficient S of modestly conducting materials in thin film geometry. Here we show that geometries that seem desirable from a signal-to-noise perspective may induce systematic errors in the measured value of S, S_m, by a factor 3 or more. The enhancement of S_m by the device geometry is related to competing conduction paths outside the region between the electrodes. We derive a universal scaling curve that allows correcting for this and show that structuring the semiconductor is not needed for the optimal electrode configuration, being a set of narrow, parallel strips.     

Performance Enhancement of Polycondensate‐Based Superplasticizers by Encapsulation

A cost‐effective and robust encapsulation system for chemical admixtures with delayed release mechanisms for construction materials like dry mix mortars is presented. Based on supplementary cementitious materials, a superplasticizer was encapsulated in matrix‐based encapsulations. Subsequently, the particle characteristics of the agglomerates and the release behavior of the superplasticizer were examined. The main objective of this research was to prove the functionality of such encapsulations for the future use in construction materials. The results obtained indicate that the performance of construction chemicals could be improved by encapsulation and controlled release for the future development of new construction materials. Furthermore, material characteristics of the supplementary cementitious material like the incline to excessive dusting or the materials density were improved by encapsulation.     

Temperature and pump power dependent photoluminescence characterization of MBE grown GaAsBi on GaAs

Bulk and quantum well GaAs_1?xBi_x/GaAs layers with Bi mole fractions from 0.02 to 0.10 are grown by molecular-beam epitaxy at temperatures ranging from 280 to 320?°C. The samples are characterized using temperature and pump-power dependent photoluminescence measurements covering 8–300?K and 1–250?mW (7–1,800?W/cm²), respectively. The results indicate that there is strong reduction in bandgap energy with the incorporation of small amounts of Bi and that GaAsBi most likely forms a weak type-I band alignment with GaAs.     

Treatment with a nonsteroidal antiinflammatory drug after calving did not improve milk production,health, or reproduction parameters in pasture-grazed dairy cows

Previous research results have indicated an increase in pregnancy rate in pasture-grazed cows treated with a nonsteroidal antiinflammatory drug (NSAID) 3 to 4 wk postcalving, when a high proportion of nucleated cells from within the uterus were polymorphonucleated; however, no effect on milk production was detected. It was hypothesized that this lack of effect on milk production was because the administration of the NSAID was too late after calving. The aims of the current study were to evaluate the timing of administering a propionic acid-derived NSAID (i.e., carprofen) on milk production, metabolic status, uterine health, and reproductive performance. Six-hundred and thirty-nine cows (134 primiparous and 505 multiparous) calving between July 4 and September 5, 2012, in 2 herds (herd 1: n = 228; herd 2: n = 411) were enrolled. Using a randomized block design, cows were allocated to 1 of 3 treatment groups as they calved: (1) no treatment (control; n = 221), (2) NSAID administered on d 1, 3, and 5 postcalving (early; n = 214), and (3) NSAID administered on d 19, 21, and 23 postcalving (late; n = 204). Milk production and composition, and body condition were determined weekly. Blood was sampled at 4 time points (1 precalving and 3 postcalving) to determine the effects of treatment on indicators of metabolic health and energy status. Uterine health was determined by measuring the proportion of nucleated cells that were polymorphonucleated following cytobrush sampling of the uterus between d 13 to 24 and d 30 to 49 postcalving. Irrespective of timing of application, NSAID did not affect milk production, body weight, or body condition during early lactation. Treatment with an NSAID 19 to 23 d postcalving increased the proportion of cows submitted for breeding during the first 3 wk of the seasonal breeding program (control: 85%, early: 83%, and late: 92%), but did not affect conception or pregnancy rates. No detectable effect of treatment on uterine health or circulating metabolites and minerals existed, although cows in the early NSAID treatment group had marginally lower serum β-hydroxybutyrate concentrations (0.1 mmol/L) than the other groups between 2 and 26 d in milk. In conclusion, administration of this particular NSAID at either 1 or 3 wk after calving did not improve milk production, indicators of health, or reproductive performance.     

Increase in Generation of Poly-Crystalline Silicon by Atmospheric Pressure Plasma-Assisted Excimer Laser Annealing

In this work, a novel atmospheric pressure plasma-assisted excimer laser annealing method for increasing the generation efficiency of poly-crystalline silicon from amorphous silicon layers is presented. Here, both the plasma and the laser propagate coaxially in order to generate energetic synergies. The influence of different process gases and plasma discharge modes as well as the working distance were investigated. Depending on the particularly applied plasma, the crystalline area was increased by a factor of approx. 1.1 to 1.9, where the highest efficiency was observed when introducing an argon plasma beam to the annealing process.     

Fouling Detection in an Optically Accessible Microstructured Heat Exchanger

The application of highly effective microstructured devices in continuous production and industrial environments is frequently prone to fouling. A new method is presented to characterize fouling in these microstructures. Thermal fouling of aqueous solutions containing whey protein were used as a test system. Different fouling effects could be observed and distinguished. Integral fouling indicators, such as thermal fouling resistance and pressure drop, as conventional criteria for the occurrence of fouling were compared with direct local optical observation. Low thermal fouling resistances could be detected.     

Design and optimization of electrochemical microreactors for continuous electrosynthesis

The study focuses on the design and construction, as well as the theoretical and experimental optimization of electrochemical filter press microreactors for the electrosynthesis of molecules with a high added value. The main characteristics of these devices are firstly a high-specific electrochemical area to increase conversion and selectivity, and secondly the shape and size of the microchannels designed for a uniform residence time distribution of the fluid. A heat exchanger is integrated into the microstructured electrode to rapidly remove (or supply) the heat required in exo- or endothermic reactions. The microreactors designed are used to perform-specific electrosynthesis reactions such as thermodynamically unfavorable reactions (continuous NADH regeneration), or reactions with high enthalpy changes.