Real-Time Analysis of Alarm Pheromone Emission by the Pea Aphid (<Emphasis Type="Italic">Acyrthosiphon Pisum</Emphasis>) Under Predation

Upon attack by predators or parasitoids, aphids emit volatile chemical alarm signals that warn other aphids of a potential risk of predation. Release rate of the major constituent of the alarm pheromone in pea aphids (Acyrthosiphon pisum), (E)-b-farnesene (EBF), was measured for all nymphal and the adult stage as aphids were attacked individually by lacewing (Chrysoperla carnae) larvae. Volatilization of EBF from aphids under attack was quantified continuously for 60 min at 2-min intervals with a rapid gas chromatography technique (zNose) to monitor headspace emissions. After an initial burst, EBF volatilization declined exponentially, and detectable amounts were still present after 30 min in most cases. Total emission of EBF averaged 16.33 +/- 1.54 ng and ranged from 1.18 to 48.85 ng. Emission was higher in nymphs as compared to adults. No differences between pea aphid life stages were detected for their speed of alarm signal emission in response to lacewing larvae attack. This is the first time that alarm pheromone emission from single aphids has been reported.     

Biosynthesis of (3<Emphasis Type="Italic">Z</Emphasis>,6<Emphasis Type="Italic">Z</Emphasis>,9<Emphasis Type="Italic">Z</Emphasis>)-3,6,9-Octadecatriene: The Main Component of the Pheromone Blend of <Emphasis Type="Italic">Erannis bajaria</Emphasis>

The hydrocarbons (3Z,6Z,9Z)-3,6,9-octadecatriene (3Z,6Z,9Z-18:H) and (3Z,6Z,9Z)-3,6,9-nonadecatriene (3Z,6Z,9Z-19:H) constitute the pheromone of the winter moth, Erannis bajaria. These compounds belong to a large group of lepidopteran pheromones which consist of unsaturated hydrocarbons and their corresponding oxygenated derivatives. The biosynthesis of such hydrocarbons with an odd number of carbons in the chain is well understood. In contrast, knowledge about the biosynthesis of even numbered derivatives is lacking. We investigated the biosynthesis of 3Z,6Z,9Z-18:H by applying deuterium-labeled precursors to females of E. bajaria followed by gas chromatography–mass spectrometry analysis of extracts of the pheromone gland. A mixture of deuterium-labeled [17,17,18,18-²H₄]-3Z,6Z,9Z-18:H and the unlabeled 3Z,6Z,9Z-18:H was obtained after topical application and injection of (10Z,13Z,16Z)-[2,2,3,3-²H₄]-10,13,16-nonadecatrienoic acid ([2,2,3,3-²H₄]-10Z,13Z,16Z-19:acid) or (11Z,14Z,17Z)-[3,3,4,4-²H₄]-11,14,17-icosatrienoic acid ([3,3,4,4-²H₄]-11Z,14Z,17Z-20:acid). These results are consistent with a biosynthetic pathway that starts with α-linolenic acid (9Z,12Z,15Z-18:acid). Chain elongation leads to 11Z,14Z,17Z-20:acid, which is shortened by α-oxidation as the key step to yield 10Z,13Z,16Z-19:acid. This acid can be finally reduced to an aldehyde and decarbonylated or decarboxylated to furnish the pheromone component 3Z,6Z,9Z-18:H. A similar transformation of 11Z,14Z,17Z-20:acid yields the second pheromone component, 3Z,6Z,9Z-19:H.     

Caged capsaicins: New tools for the examination of TRPV1 channels in somatosensory neurons

The vanilloid capsaicin, N-(4-hydroxy-3-methoxybenzyl)-8-methylnon-6-enamide, is the pungent ingredient of chili peppers and is used in pain research as an activating ligand of heat-sensitive transduction channels in nociceptive neurons. Here we describe the synthesis and application of two capsaicin derivatives modified at the hydroxy function of the vanillyl motif: alpha-carboxy-4,5-dimethoxy-2-nitrobenzyl-caged (CDMNB-caged) capsaicin and {7-[bis(carboxymethyl)amino]coumarin-4-yl}methoxycarbonyl-caged (BCMACMOC-caged) capsaicin. These compounds show dramatically reduced pungency, but release active capsaicin upon irradiation with UV light. CDMNB-caged capsaicin can be used to perform concentration-jump experiments, while BCMACMOC-caged capsaicin is membrane-impermeant and can be applied selectively to the intracellular or extracellular sides of a plasma membrane. Both compounds can serve as valuable research tools in pain physiology.     

Bioconcentration factor hydrophobicity cutoff: an artificial phenomenon reconstructed

The debate on whether highly hydrophobic organic chemicals (with log Kow > 5-6) bioconcentrate less than may be expected from their hydrophobicity is still not settled. The often-observed hydrophobicity "cutoff" might either be explained by artifacts occurring during bioconcentration factor (BCF) measurements or by a true mechanism, i.e., reduced uptake of larger molecules due to decreased membrane permeation. In this paper, we advocate there is no hydrophobicity cutoff, at least not for compounds with log Kow of up to 7.5. Data are presented on the uptake of polycyclic aromatic hydrocarbons (PAHs) in the aquatic worm Lumbriculus variegatus. For this combination of chemicals/organism, BCFs were measured using several approaches, including traditional batch uptake kinetics measurements and alternative ones, involving solid-phase microextraction (SPME), polyoxymethylene solid-phase extraction (POM-SPE), field exposures, and the substitution of living worms by dead worm material or liposomes. A hydrophobicity cutoff was observed at two levels during the traditional approach only, whereas for the other approaches it was absent. The data were used to demonstrate the presence and impact of artifacts due to so-called "third phase effects" and nonequilibrium conditions that can obscure "true uptake". The experiments suggest that previously observed cutoff effects can be ascribed to artifacts, and that current risk assessment (often incorporating a BCF cutoff) as well as BCF measurement techniques of very hydrophobic chemicals should be revised.     

2‐Aminopyridines as an α‐Bromination Shuttle in a Transition Metal‐Free One‐Pot Synthesis of Imidazo[1,2‐a]pyridines

A wide range of imidazo[1,2‐a]pyridines are accessible from cheap and readily available 2‐aminopyridines and 1,3‐dicarbonyl compounds using a unique CBrCl₃/2‐aminopyridine system for bromination at the α‐carbon. 2‐Aminopyridine is not only the substrate but also acts as a bromination shuttle, transferring the bromine atom from CBrCl₃ to the α‐carbon of the 1,3‐dicarbonyl. The reaction mechanism involves a series of reversible steps, including an addition reaction with cyclic transition state, to form a bromo‐hemiaminal intermediate. Isolated yields of up to 97% were obtained under mild conditions and at short reaction times in this transition metal‐free, one‐pot synthesis.

     

Exceeding hemoglobin target levels in US hemodialysis patients receiving epoetin, 1999 to 2002

Despite emerging concerns that exceeding anemia targets with erythropoiesis stimulating agents may be risky for hemodialysis patients, the magnitude of and risk factors for the problem have received little attention, particularly regarding year-to-year comparisons. We studied monthly hemoglobin and epoetin levels in 41,101 patients aged at least 65 years who initiated hemodialysis between 1999 and 2002, with upper targets defined by hemoglobin levels of 120 and 130 g/L, respectively. While baseline hemoglobin values and epoetin doses rose from year to year, their rates of change during follow-up declined (p<0.0001). Similar patterns were seen after reaching hemoglobin levels of 110 g/L; comparing 1999 to 2002, the proportions reaching 120 and 130 g/L in the ensuing 9 months increased from 90% to 96% (p<0.0001) and from 56% to 69%, respectively (p<0.0001). Multivariate analysis showed that, while more recent years of dialysis inception and initial epoetin dose were associated with all 3 outcomes, higher baseline hemoglobin levels were associated with reaching levels of 110 and 120 g/L, but not 130 g/L. Exceeding hemoglobin level targets has become widespread in the United States and is associated with changes in epoetin dosing practices.     

A Review of Heat Transfer and Pressure Drop Correlations for Laminar Flow in Curved Circular Ducts

Heat transfer and pressure drop correlations for fully developed laminar Newtonian fluid flow in curved and coiled circular tubes are reviewed. Curved geometry is one of the passive heat transfer enhancement methods that fits several heat transfer applications, such as power production, chemical and food industries, electronics, environment engineering, and so on. Centrifugal force generates a pair or two pairs of cross-sectional secondary flow (based on the Dean number), which are known as the Dean vortices, and improves the overall heat transfer performance with an amplified peripheral Nusselt number variation. The main purpose of this review paper is to provide researchers with a comprehensive list of correlations and concepts that they may need during their research. The paper begins with an introduction to the governing equations and important dimensionless numbers for the flow in curved tubes. The correlations for developing flow in curved and coiled circular tubes are also presented. The main contribution of this study is reviewing the numerical and experimental correlations to calculate friction factor and Nusselt number in curved circular tubes. Nusselt number correlations are categorized based on the thermal boundary condition, as well as on the method. A Dean number range of 1 to 20,000 for the pressure drop correlations and 1 to 7000 for the heat transfer correlations and a Prandtl number range of 0.1 to 7,000 are covered with the reviewed correlations.     

A simulation-based methodology to analyse production line disruptions

This article proposes a discrete event simulation (DES) framework to analyse the impact of disturbances, their parameter values, and their interactions, on production line efficiency. The framework is demonstrated by means of a case study of a manufacturing process in an Indian automotive manufacturer. Various scenarios are generated and studied using design of experiment (DOE) to investigate the effects of changes in product, technology, cycle time, and worker competency, and to derive the optimal set of process and decision parameters.     

A comparison of supply chain vulnerability indices for different categories of firms

Given the high vulnerability of today's supply chains to disruptions, measuring and managing supply chain vulnerability has become critical. In the attempt to support practice in reducing supply chain vulnerability, we (1) discuss and define the concept of supply chain vulnerability and (2) measure and compare supply chain vulnerability for various categories of firms. Normal Accident Theory and High Reliability Theory provide the theoretical foundations for the empirical study, and graph modelling is the method used to construct a measure for supply chain vulnerability. The empirical data largely confirm that there is a negative relationship between supply chain vulnerability and supply chain performance, a positive relationship between structural categories (firm size and production type) and supply chain vulnerability, and a positive relationship between supply chain vulnerability and managerial categories (logistics importance, supply chain risk planning, and supply chain risk management).