Torrefied biomass‐polypropylene composites

Torrefied almond shells and wood chips were incorporated into polypropylene as fillers to produce torrefied biomass‐polymer composites. The composites were prepared by extrusion and injection molding. Response surface methodology was used to examine the effects of filler concentration, filler size, and lignin factor (relative lignin to cellulose concentration) on the material properties of the composites. The heat distortion temperatures, thermal properties, and tensile properties of the composites were characterized by thermomechanical analysis, differential scanning calorimetry, and tensile tests, respectively. The torrefied biomass composites had heat distortion temperatures of 8–24°C higher than that of neat polypropylene. This was due to the torrefied biomass restricting mobility of polypropylene chains, leading to higher temperatures for deformation. The incorporation of torrefied biomass generally resulted in an increase in glass transition temperature, but did not affect melting temperature. Also, the composites had lower tensile strength and elongation at break values than those of neat polypropylene, indicating weak adhesion between torrefied biomass and polypropylene. However, scanning electron microscopy results did indicate some adhesion between torrefied biomass and polypropylene. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41582.     

Unusual exfoliation of layered silicate clays by non-aqueous amine diffusion mechanism

The organic ionic exchange intercalation of smectite clays is conventionally performed in water swelling conditions. Here we report a different mechanism for modifying the smectite clays in alcohol solvents. The modification of sodium montmorillonite with poly(oxyethylene-oxypropylene)-amines (POA-amine) were compared for the differences between in water and in alcohol. In water, the intercalation of hydrophobic poly(oxypropylene)-rich amines in the silicate galleries expands the interlayer spacing up to 10 nm and even to exfoliation (featureless in X-ray diffraction pattern) with over 5 amine equivalents, where as hydrophilic poly(oxyethylene)-rich amines could only intercalate in a low spacing of 1.8 nm. On the other hand, all of the POA-amines in isopropanol afford the exfoliation with over, 3 amine equivalents. The mechanism of this unexpected exfoliation is explained by the thermodynamic formations of an imaginary membrane surrounding the clay units, followed by amine diffusion from the solvent into the clay galleries.     

Reactive compatibilization of the poly(ethylene terephthalate)/liquid crystalline polymer blends by solid epoxy resin as a coupling agent

A selected reactive coupling agent can be served as an effective compatibilizer for certain immiscible and incompatible blends should both blend constituents possess the necessary functional groups that can react with the coupling agent at comparable rates. Solid epoxy resin with two epoxide endgroups per molecule was demonstrated to be an efficient reactive compatibilizer for the incompatible blends of poly(ethylene terephthalate) (PET) and copolyester liquid crystalline polymer (LCP) by functioning as a coupling agent. The main chain structure of the epoxy resin is neither identical not miscible with PET and LCP and tends to reside at interface during melt mixing. This preferential residence gives the epoxy compatibilizer greater opportunity to react with both PET and LCP simultaneously to produce the in situ–formed epoxy-b-LCP mixed copolymer. This in situ–formed mixed copolymer is highly effective in compatibilizing the PET/LCP blends. This reactive epoxy compatibilizer enhances the LCP fibril formation and results in substantial improvements on stiffness and toughness of the PET/LCP blends. © 1996 John Wiley & Sons, Inc.     

Fracture toughness characterization of a PC/ABS blend under different strain rates by various J-integral methods

A published, nonconventional J-integral method, based on the hysteresis energy and the ASTM E813 methods, has been employed to test the fracture toughness of a polycarbonate (PC)/acrylonitrile-butadiene-styrene (ABS) blend. The critical J values (J_Ic) at crosshead speeds ranging from 0.5 to 20 mm/min obtained from the hysteresis energy method are ∼10 to 20% higher than those obtained from the E813–81 method and ∼50 to 70% lower than those obtained from the E813–87 method. However, the hysteresis energy method results in comparable J_Ic values with a modified ASTM E813–87 method when the 0.2 mm offset line is replaced with a 0.1 mm offset line. The critical displacements in terms of the onset of crack initiation, determined from the plots of hysteresis energy vs. displacement, hysteresis ratio vs. displacement, and the true crack growth length vs. displacement, are fairly close in value. This indicates the critical crack initiation and the corresponding J_Ic obtained from this hysteresis energy method indeed represent the actual physical event of the onset of crack initiation.     

Identification of Entry Inhibitors against Delta and Omicron Variants of SARS-CoV-2

Entry inhibitors against severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) are urgently needed to control the outbreak of coronavirus disease 2019 (COVID-19). This study developed a robust and straightforward assay that detected the molecular interaction between the receptor-binding domain (RBD) of viral spike protein and the angiotensin-converting enzyme 2 (ACE2) receptor in just 10 min. A drug library of 1068 approved compounds was used to screen for SARS-CoV2 entry inhibition, and 9 active drugs were identified as specific pseudovirus entry inhibitors. A plaque reduction neutralization test using authentic SARS-CoV-2 virus in Vero E6 cells confirmed that 2 of these drugs (Etravirine and Dolutegravir) significantly inhibited the infection of SARS-CoV-2. With molecular docking, we showed that both Etravirine and Dolutegravir are preferentially bound to primary ACE2-interacting residues on the RBD domain, implying that these two drug blocks may prohibit the viral attachment of SARS-CoV-2. We compared the neutralizing activities of these entry inhibitors against different pseudoviruses carrying spike proteins from alpha, beta, gamma, and delta variants. Both Etravirine and Dolutegravir showed similar neutralizing activities against different variants, with EC50 values between 4.5 to 5.8 nM for Etravirine and 10.2 to 22.9 nM for Dolutegravir. These data implied that Etravirine and Dolutegravir may serve as general spike inhibitors against dominant viral variants of SARS-CoV-2.     

Linear adsorption of nonionic organic compounds from water onto hydrophilic minerals: silica and alumina

To characterize the linear adsorption phenomena in aqueous nonionic organic solute-mineral systems, the adsorption isotherms of some low-molecular-weight nonpolar nonionic solutes (1,2,3-trichlorobenzene, lindane, phenanthrene, and pyrene) and polar nonionic solutes (1,3-dinitrobenzene and 2,4-dinitrotoluene) from single- and binary-solute solutions on hydrophilic silica and alumina were established. Toward this objective, the influences of temperature, ionic strength, and pH on adsorption were also determined. It is found that linear adsorption exhibits low exothermic heats and practically no adsorptive competition. The solute-solid configuration and the adsorptive force consistent with these effects were hypothesized. For nonpolar solutes, the adsorption occurs presumably by London (dispersion) forces onto a water film above the mineral surface. For polar solutes, the adsorption is also assisted by polar-group interactions. The reduced adsorptive forces of solutes with hydrophilic minerals due to physical separation by the water film and the low fractions of the water-film surface covered by solutes offer a theoretical basis for linear solute adsorption, low exothermic heats, and no adsorptive competition. The postulated adsorptive forces are supported by observations that ionic strength or pH poses no effect on the adsorption of nonpolar solutes while it exhibits a significant effect on the uptake of polar solutes.     

Sorption of aromatic organic pollutants to grasses from water

The influence of plant lipids on the equilibrium sorption of three aromatic solutes from water was studied. The plant-water sorption isotherms of benzene, 1,2-dichlorobenzene, and phenanthrene were measured over a large range of solute concentrations using sealed vessels containing water, dried plant material, and solute. The plant materials studied include the shoots of annual rye, tall fescue, red fescue, and spinach as well as the roots of annual rye. Seven out of eight sorption isotherms were linear with no evidence of competitive effects between the solutes. For a given plant type, the sorption coefficient increased with decreasing solute water solubility. For a given solute, sorption increased with increasing plant lipid content. The estimated lipid-water partition coefficients of individual solutes were found to be significantly greater than the corresponding octanol-water partition coefficients. This indicates that plant lipids are a more effective partition solvent than octanol for the studied aromatic compounds. As expected, the solute lipid-water partition coefficients were log-linearly related to the respective water solubilities. For the compounds studied, partitioning into the lipids is believed to be the primary sorption mechanism.     

Polymerase chain reaction-mediated characterization of molds belonging to the Aspergillus flavus group and detection of Aspergillus parasiticus in peanut kernels by a multiplex polymerase chain reaction

The Aspergillus flavus group covers species of A. flavus and Aspergillus parasiticus as aflatoxin producers and Aspergillus oryzae and Aspergillus sojae as koji molds. Genetic similarity among these species is high, and aflatoxin production of a culture may be affected by cultivation conditions and substrate composition. Therefore, a polymerase chain reaction (PCR)-mediated method of detecting the aflatoxin-synthesizing genes to indicate the degree of risk a genotype has of being a phenotypic producer was demonstrated. In this study, 19 strains of the A. flavus group, including A. flavus, A. parasiticus, A. oryzae, A. sojae, and one Aspergillus niger, were subjected to PCR testing in an attempt to detect four genes, encoding for norsolorinic acid reductase (nor-1), versicolorin A dehydrogenase (ver-1), sterigmatocystin O-methyltransferase (omt-1), and a regulatory protein (apa-2), involved in aflatoxin biosynthesis. Concurrently, the strains were cultivated in yeast-malt (YM) broth for aflatoxin detection. Fifteen strains were shown to possess the four target DNA fragments. With regard to aflatoxigenicity, all seven aflatoxigenic strains possessed the four DNA fragments, and five strains bearing less than the four DNA fragments did not produce aflatoxin. When peanut kernels were artificially contaminated with A. parasiticus and A. niger for 7 days, the contaminant DNA was extractable from a piece of cotyledon (ca. 100 mg), and when subjected to multiplex PCR testing using the four pairs of primers coding for the above genes, they were successfully detected. The target DNA fragments were detected in the kernels infected with A. parasiticus, and none was detected in the sound (uninoculated) kernels or in the kernels infected with A. niger.     

Experimental study of forced convective boiling for non-azeotropic refrigerant mixtures R-22/R-124 in horizontal smooth tube

In this article, the experiment is carried out with four stages of test section and new experimental data of non-azeotropic refrigerant mixtures R-22/R-124 are presented. Existing correlations are analysed and new ones are proposed for pure refrigerants. The nucleate boiling correlation of the refrigerant mixtures is modified so as to obtain the evaporation heat transfer coefficient of the refrigerant mixtures in a smooth tube. The result shows that the majority of the predictions fall within ±30% of the experiments.