Development,optimization, and characterization of a novel tea tree oil nanogel using response surface methodology

Purpose: To develop and optimize nanoemulsion (NE)-based emulgel (EG) formulation as a potential vehicle for topical delivery of tea tree oil (TTO).

Methodology: Central composite design was adopted for optimizing the processing conditions for NE preparation by high energy emulsification method viz. surfactant concentration, co-surfactant concentration, and stirring speed. The optimized NE was developed into emulgel (EG) using pH sensitive polymer Carbopol 940 and triethanolamine as alkalizer. The prepared EG was evaluated for its pH, viscosity, and texture parameters, ex vivo permeation at 37?°C and stability. Antimicrobial evaluation of EG in comparison to conventional gel and pure TTO was also carried out against selected microbial strains.

Results and discussion: Optimized NE had particle size and zeta potential of 16.23?±?0.411?nm and 36.11?±?1.234?mV, respectively. TEM analysis revealed the spherical shape of droplets. The pH of EG (5.57?±?0.05?) was found to be in accordance with the range of human skin pH. EG also illustrated efficient permeation (79.58?μL/cm²) and flux value (J_SS) of 7.96?μL cm²/h through skin in 10?h. Viscosity and texture parameters, firmness (9.3?±?0.08?g), spreadability (2.26?±?0.06?mJ), extrudability (61.6?±?0.05?mJ), and adhesiveness (8.66?±?0.08?g) depict its suitability for topical application. Antimicrobial evaluation of EG with same amount of TTO as conventional gel revealed broader zones of growth inhibitions against all the selected microbial strains. Moreover, EG was also found to be nonirritant (PII 0.0833). These parameters were consistent over 90 d.

Conclusion: TTO EG turned out to be a promising vehicle for the topical delivery of TTO with enhanced therapeutic efficacy.     

Importance of Deoxyribose Degradation Assay for Evaluating Hydroxyl Radical Scavenging Activity of Punica Extract

Punica granatum L. (Family: Punicaceae), commonly known as pomegranate (Anar) has been used traditionally as medicine to treat a number of diseases and disorders. Various parts of the plant and their active constituents are known to possess diverse biological activity. However, little is known about the antioxidant potential of pomegranate fruit peel, which is otherwise considered as waste. Therefore, the concentration-dependent hydroxyl radical scavenging ability of Punica granatum seed and peel extracts (alcoholic and aqueous) using deoxyribose degradation assay were analyzed and compared. The hydroxyl radical scavenging activity at different concentrations of extract (10 to 250 μg/mL) both in presence and/or absence of ascorbic acid and ethylenediamine tetra acetic acid was determined. It was observed that a higher concentration of extract suppresses scavenging activity and lower promotes antioxidant property. Based on the observations, it may be inferred that pomegranate extract, especially from the spent/waste prt, has a strong antioxidant property as assessed by its property of scavenging hydroxyl radical formation.     

Augmented reality assisted facility layout digitization and planning

Journal of Mechanical Science and Technology - Facility layout planning (FLP) has an important role in manufacturing industries. There are few approaches to solve FLP such as procedural,...     

Pollen morphology and its taxonomic potential in some selected taxa of Caesalpiniaceae observed under light microscopy and scanning electron microscopy

Pollen micromorphology is not only used to check the functional and structural evolution in plants but also to solve the taxonomic problem related to the classification of plants. Therefore, keeping in view the significance of pollen traits, selected taxa of the subfamily Caesalpiniaceae was collected from different geographical regions of Pakistan. The species were then analyzed under both light microscopy and scanning electron microscopy techniques to investigate the importance of micromorphological characters of pollen in the identification and classification of species. Great variation was recorded in equatorial shape, surface ornamentation, tectum, polar diameter, equatorial diameter, and exine thickness. However, little variation was observed in pollen type, polar shape, and fertility of pollen. The equatorial shape of five types was observed: prolate, prolate-spheroidal, spheroidal-subprolate, subspheroidal-prolate, and subspheroidal. Four types of surface ornamentation, psilate, granulate, clavate, and perforate, were recorded. Tectum of five types, intactate, reticulate regulate, medium reticulate, tactate, and striate, was observed. Sexine was thicker than nexine in all studied species. The largest polar diameter was observed in Caesalpinia pulcherrima 64.1 μm while the smallest in Parkinsonia aculeata 26.1 μm. The largest equatorial diameter was found in C. pulcherrima of 70.25 μm whereas the smallest in P. aculeata 27.57 μm. All the pollens analyzed were tricolporate. All studied species have a fertility ratio of more than 90%. A taxonomic key was developed to show the variation in pollen features and delimit species for the correct identification. In conclusion, the pollen traits were found useful to define species boundaries at various taxonomic ranks and will strengthen the taxonomy of this subfamily. Besides, this study also explored the palynological traits and their implication in the taxonomy of the subfamily Caesalpiniaceae.     

Macromorphological and micromorphological seed features of selected taxa of Caesalpiniaceae using light and scanning electron microscopy

Seed micromorphological and macromorphological characteristics of 12 taxa of Caesalpiniaceae from Pakistan have been studied, using light and scanning electron microscopy, to investigate the importance of seed coat features as a taxonomic tool. Great variations have been observed in color, shape, dimension, and seed surface pattern among the different genera of the family. A taxonomic key was prepared for the studied taxa. Six types of seed shapes were observed; circular, elliptical, irregular, oblong, oval, and ovoid. All examined seeds were hard except fragile seeds of Haematoxylom campechianum. Eight types of surface ornamentation have been noticed that include levigate, lugose, papillate, reticulate, reticulate irregular, reticulate regular, rhombus, and rogues. Majority of the taxa has been observed with thick ornamentation wall but thin ornamentation wall has also been recorded in few species. Fracture line of the various patterns was present in all taxa except genus Bauhinia. Three types of texture crudeness; coarse, medium, and fine have been recorded. Both micromorphological and macromorphological characters of seed are very fruitful in identification and classification of Caesalpiniaceae.     

Adhatoda vasica in Conjunction with Binary Combinations of Metal Salts and Biomordants as an Effective Textile Dye to Produce novel Shades on Wool

This study was undertaken to propose an alternative use of Adhatoda vasica leaves extract as a potential source of natural dye for the coloration of woolen yarn/fibers. Premordanting technique was adopted with double metal salt combinations of ferrous sulfate, stannous chloride, and potassium aluminum sulfate and double biomordant combinations of gallnut, pomegranate, and babool, to achieve dyed textile materials of acceptable colorimetric and fastness properties. Sixty-three sober and elegant shades were developed on wool by varying the nature and the concentration of mordants involved in the combinations. The hue of color developed was found to be in yellow-red coordinate of color space diagram. All the dyed samples presented excellent color strength (K/S) values and highest values were found in case of gallnut + pomegranate peel extract (PPE) combination. Biomordants produced altogether different behavior in comparison to metal mordants in the development of ecofriendly shades of different hue and tune. Majority of the dyed samples showed excellent fastness properties with respect to light, washing, and rubbing which confirmed the possibility of using A. vasica leaves extract as an effective yellow natural dye.     

Bi and Tri Metal Salt Combinations plus Colorants Extracted from Timber Industry Waste as Effective Dyeing Materials to Produce Novel Shades on Wool

This study was undertaken to propose alternative use for teak leaves, a timber industry byproduct, as potential dyeing source for wool fibers. The coloring potential of anthraquinone colorants from teak leaves were studied on wool with pre-mordanting method using double and triple mix metal salt combinations (ferrous sulphate, stannous chloride and potassium aluminum sulphate) as mordants. Thirty-six sober and elegant shades were developed on wool by varying the type of metal involved in combination as well as concentration of the dye. The hue of color developed ranged from light orange—brown to dark brown. The color strength (K/S) has been found to be very good in dyed woolen yarn samples and particularly was highest for iron + alum combination. Color fastness with respect to light exposure washing, rubbing for the developed shades ranged between good to very good, which confirmed the possibility of using waste leaves of Tectona grandis as a source of effective brown natural dye.     

Melt Production and Antimicrobial Efficiency of Low-Density Polyethylene (LDPE)-Silver Nanocomposite Film

Colloidal silver nanoparticles with a size of 5.5 ± 1.1 nm were prepared by chemical reduction using polyethylene glycol (PEG). Silver nanoparticles were incorporated into low-density polyethylene (LDPE) by melt blending and subsequent hot pressing at 140 °C to produce nanocomposite film with an average thickness of 0.7 mm. PEG was added at 5% weight of polymer as a compatibilizer agent in order to prevent agglomeration and provide uniform distribution of nanoparticles in polymer matrix. Antimicrobial activity of silver nanocomposites against Escherichia coli ATCC 13706, Staphylococcus aureus ATCC12600, and Candida albicans ATCC10231 was evaluated by semi-qualitative agar diffusion test and quantitative dynamic shake flask test. Mechanical properties of nanocomposites were not significantly different from silver-free LDPE-containing PEG films (p > 0.05), and silver nanoparticles did not form chemical bonding with the polymer. LDPE-silver nanocomposite samples by more than 6.69 ppm silver nanoparticles showed considerable antimicrobial clear zone. LDPE-silver nanocomposite affected growth kinetic parameters of the examined bacteria and is more efficient on S. aureus than E. coli. Polyethylene-silver nanocomposites containing 22.64 ppm silver nanoparticles could reduce 57.8% growth rate and 23.3% maximum bacterial concentration and increase 35.8% lag time of S. aureus. This study shows the potential use of LDPE-silver nanocomposite as antimicrobial active film. Antimicrobial efficiency of silver nanocomposite depends on silver nanoparticles concentration; however, high level of silver nanoparticles may lead to weakening of mechanical properties.     

Drying Models and Quality Analysis of Sun-Dried Ciku

Sun drying of ciku (Manilkara zapota) was carried out on different sample sizes to investigate the effects on drying kinetics. It was found that the maximum drying rates of sun-dried ciku decreased with larger product size. Three sunny days are needed to dry the ciku slabs to an average final moisture content of 0.2 g H₂O/g dry mass. The results showed that hardness and chewiness of the dried samples were significantly different (p < 0.05) compared to fresh ciku slabs and commercial dried fruit. The color measurement of dried product showed that L? and b? values significantly decreased (p < 0.05), whereas the a? value increase was not significantly different (p > 0.05) compared to fresh ciku slabs. In addition, sun-dried ciku retained a total polyphenol content (TPC) that was relatively low (p < 0.05) compared to fresh ciku.     

Artificial Neural Network Modeling of the Deposition Rate of Lactose Powder in Spray Dryers

A spray dryer is the ideal equipment for the production of food powders because it can easily impart well-defined end product characteristics such as moisture content, particle size, porosity, and bulk density. Wall deposition of particles in spray dryers is a key processing problem and an understanding of wall deposition can guide the selection of operating conditions to minimize this problem. The stickiness of powders causes the deposition of particles on the wall. Operating parameters such as inlet air temperature and feed flow rate affect the air temperature and humidity inside the dryer, which together with the addition of drying aids can affect the stickiness and moisture content of the product and hence its deposition on the wall. In this article, an artificial neural network (ANN) method was used to model the effects of inlet air temperature, feed flow rate, and maltodextrin ratio on wall deposition flux and moisture content of lactose-rich products. An ANN trained by back-propagation algorithms was developed to predict two performance indices based on the three input variables. The results showed good agreement between predicted results using the ANN and the measured data taken under the same conditions. The optimum condition found by the ANN for minimum moisture content and minimum wall deposition rate for lactose-rich feed was inlet air temperature of 140°C, feed rate of 23 mL/min, and maltodextrin ratio of 45%. The ANN technology has been shown to be an excellent investigative and predictive tool for spray drying of lactose-rich products.