Nanocrystalline Ni coatings strengthened with ultrafine particles

In this study, nanocrystalline Ni powders and thermally sprayed coatings, containing ultrafine AlN particles, were synthesized and characterized. The results indicated that the presence of AlN particles in the powders drastically decreased the dimension of agglomerates formed by cryomilling and increased the surface roughness of the agglomerates. The AlN phase was broken down into ultrafine particles of approximately 30 nm in size. These particles were dispersed in the Ni matrix and enhanced the development of a nanocrystalline structure in the Ni matrix during cryomilling. Selected-area diffraction patterns, obtained from transmission electron microscopy (TEM) and X-ray mapping with scanning electron microscopy (SEM), confirmed the presence of AlN particles in the coatings. The presence of AlN particles also led to an increase in the amount of NiO phase that was distributed in the coating, in the form of ultrafine, round particles. AlN particles increased the microhardness of the Ni coating by approximately 60 pct. Indentation-fracture results also indicated that the fine, dispersed AlN particles raised the apparent toughness of the Ni coating. The synthesized Ni coatings containing ultrafine AlN particles were characterized as equiaxed nanocrystalline grains with an average size of 24 nm, in which twins were observed. The increase in microhardness resulted from both grain refinement and the presence of ultrafine particles. The latter played the primary role in strengthening.     

Microstructure and fatigue characteristics of direct chill cast and electromagnetic cast 2024 Al alloy ingots

The distinct advantages of the electromagnetic casting (EMC) process consist in the presence of stirring motions in the melt, which lead to significant grain size reduction in solidified ingot. Furthermore, surface and subsurface qualities are improved due to the absence of ingot mold. However, it is impossible to achieve the aforementioned advantages in conventional direct chill casting (DCC). In order to contrast the before and after heat treatments of the microstructural and mechanical characteristics of EMC and DCC 2024 aluminium alloys, optical microscopy, scanning electron microscopy, transmission electron microscopy (TEM), X-ray diffractions (XRD), differential scanning calorimetry (DSC), etc. were carried out. Compared with the DCC ingot, the EMC ingot has better mechanical properties not only in the ascast condition but also in the as-aged condition. The DSC curves show that the EMC specimens have high enthalpy, i.e., the thermal kinetic energy to form precipitates during the aging treatment process. Despite heat treatments applied to the DCC ingot, it fails to attain the same mechanical properties as the EMC ingot. Moreover, considering the expernsive scalping operation for DCC ingots, the EMC technique, which offers a lower manufacturing cost, is one of the best manufacturing methods used in obtaining the ingots of wrought aluminum alloys.     

Time-dependent deformation in an enhanced SiC/SiC composite

Time-dependent deformation in an enhanced SiC/SiC composite has been studied under constant load at high temperatures of 1200 °C, 1300 °C, and 1400 °C. Creep damage evolution was evaluated by a Young’s-modulus change of partial unloading and microscopic observation. The addition of the glassy phase in the matrix is very effective for protecting the composite from oxidation. The transient creep is dominant in creep life at all the temperatures. An empirical equation is proposed to describe creep behavior of the composite. It is found that creep activation energy increases with creep time at stresses lower than matrix cracking stress, but the activation energy remains constant at stresses higher than the matrix cracking stress. The creep strain rate of the composite is considered to be controlled by creep of fibers based on examining the time, strain, stress, and temperature dependencies of creep strain rates.     

PERFORMANCE OF THREE STAGE TURBO－EQUALIZATION－DECODING

An increasing demand for high data rate transmission and protection over bandlimited channels with severe inter-symbol interference has resulted in a flurry of activity to improve channel equalization. In conjunction with equalization, channel coding-decoding can be employed to improve system performance. In this letter, the performance of the three stageturbo-equalization-decoding employing log maximum a posteriori probability is experimentally evaluated by a fading simulator. The BER is evaluated using various information sequence and interleaver sizes taking into account that the communication medium is a noisy inter symbol interference channel.     

A Bluetooth Routing Protocol Using Evolving Fuzzy Neural Networks

In this paper, a routing protocol which utilizes the characteristics of Bluetooth technology is proposed for Bluetooth-based mobile ad hoc networks. The routing tables are maintained in the master devices and the routing zone radius for each table is adjusted dynamically by using evolving fuzzy neural networks. Observing there exists some useless routing packets which are helpless to build the routing path and increase the network loads in the existing ad hoc routing protocols, we selectively use multiple unicasts or one broadcast when the destination device is out of the routing zone radius coverage of the routing table. The simulation results show that the dynamic adjustment of the routing table size in each master device results in much less reply time of routing request, fewer request packets and useless packets compared with two representative protocols, Zone Routing Protocol and Dynamic Source Routing.     

Modified modulation formats using time-varying phase functions

New modulation formats are presented that increase the transmission rate over that of conventional systems, without degrading the bit error rate (BER) and with minimal bandwidth variation. A time-varying function called an "extra phase variation function" (EPVF) is added to the discrete phase of conventional modulation formats such as M-PSK and QAM to transmit additional data bits. A receiver configuration is presented that allows the decoding of information represented by the discrete and extra phases. It is shown that in an additive white Gaussian noise (AWGN) channel, the BER performance of the bits carried by the discrete phase and the extra phase in the modified format improves over the BER of conventional modulation formats.     

POWER OPTIMIZATION OF FINITE STATE MACHINE BASED ON GENETIC ALGORITHM

Using state assignment to minimize power dissipation and area for finite state machines is computationally hard.Most of published results show that the reduction of switching activity often trades with area penalty.In this paper,a new approach is proposed.Experimental results show a significant reduction of switching activity without area penalty compared with previous publications.     

Decision support for AIDS control programmes in Eastern Africa

The Acquired Immune Deficiency Syndrome (AIDS) constitutes the worst hazard to health care systems in Eastern Africa. Misallocation of scarce resources of AIDS Control Programmes will unavoidably lead to additional infections and casualties. The following paper discusses a system dynamics model which allows to assess the impact of different interventions on a pattern population in Eastern Africa. It becomes obvious that short- and long-term consequences of these programmes differ significantly. The optimal allocation of resources, therefore, is highly complex and calls for decision support systems to sustain AIDS control programmes.     

A combination of differential equations and convolution in understanding the spread of an epidemic

Nonlinear dynamical method of projecting the transmission of an epidemic is accurate if the input parameters and initial value variables are reliable. Here, such a model is proposed for predicting an epidemic. A method to supplement two variables and two parameters for this proposed model is demonstrated through a robust statistical approach. The method described here worked well in case of three continuous distributions. Model predictions could be lower estimates due to under-reporting of disease cases. Anad hoc procedure with a technical note is provided in the appendix An earlier version of this paper was presented at the annual conference of the Indian Society for Mathematical Modelling & Computer Simulation, Bangalore, November 14–15, 2002     

STUDY ON PHASE PERCEPTION IN SPEECH

The perceptual effect of the phase information in speech has been studied by auditory subjective tests. On the condition that the phase spectrum in speech is changed while amplitude spectrum is unchanged, the tests show that: (1) If the envelop of the reconstructed speech signal is unchanged, there is indistinctive auditory perception between the original speech and the reconstructed speech; (2) The auditory perception effect of the reconstructed speech mainly lies on the amplitude of the derivative of the additive phase; (3) td is the maximum relative time shift between different frequency components of the reconstructed speech signal. The speech quality is excellent while td <10ms; good while 10ms< td <20ms; common while 20ms< td <35ms, and poor while td >35ms.