Formation of cube texture in nickel-palladium alloys for epitaxial substrates for deposition of high-temperature superconductors

The texture, structure, and magnetic and mechanical properties of thin ribbons of nickel-palladium alloys have been studied. It has been demonstrated that in Ni₉₄Pd₆ and Ni_92.5Pd₅W_2.5 alloys, a sharp cube texture can be formed that is stable up to rather high annealing temperatures. Segregation of palladium atoms to surface layers of ribbons has been found, which gives additional advantages for using these ribbons as substrates for epitaxial deposition of high-temperature superconductors.     

Surface tension isotherms of a free surface and grain boundaries in the Cu-Sn system

Surface tension of pure copper and its alloys with Sn has been measured at 1000°C in a hydrogen atmosphere. Surface tension of a free surface equaled 1.81 N/m for pure copper, and 1.55, 1.38, and 1.28 N/m for the alloys with 0.05, 0.22, and 0.33 at % Sn, respectively; surface tension at grain boundaries equaled 0.5 N/m for pure copper, and 0.36, 0.3, and 0.23 N/m for the alloys, respectively. Based on these data, the concentration dependence of tin absorption at a free surface and grain boundaries has been calculated. Parameters of Sn absorption at grain boundaries and a free surface of copper have been compared with those of Sb and Bi.     

A Review of Dynamic Fracture Studies in Functionally Graded Materials

Abstract:  This article presents a review of dynamic fracture studies on functionally graded materials. A brief literature review on the fracture mechanics of graded materials is presented first. This is followed by a discussion on the higher-order asymptotic analysis of the transient elastic field surrounding the tip of a dynamically growing crack in a functionally graded material. A comprehensive experimental study of dynamic crack growth in model functionally graded material using the optical method of reflection photoelasticity and high-speed photography is then presented. The results are analysed to establish a generalised relationship between the crack velocity and the dynamic mode-I stress intensity factor (SIF). This relationship is found to be unique and is distinctly different from that previously established for the matrix material (polyester). Finally, an innovative experimental procedure is used to demonstrate the necessity of employing a fully transient stress-field representation in the analysis of optical data for an accurate prediction of the dynamic SIF history.     

Impedance spectroscopy of ultrafine-grain SnO2 ceramics with a variable grain size

The impedance spectra of nanocrystalline SnO₂ ceramics with an average grain size d ranging from 3 to 43 nm were investigated in the frequency range 1–10⁶ Hz at temperatures from 25 to 300°C in a dry oxygen atmosphere. Analysis of the experimental data by the graphoanalytical method made it possible to separate the contributions of grain bulk and grain boundaries to the conductivity. It is shown that the samples investigated can be arbitrarily divided into two groups with respect to the character of their conductivity. For the samples with an average grain size d < 25 nm, the charge transfer processes are almost completely determined by the grain boundaries. In samples with a larger grain size, the contribution of grain bulk to the conductivity is comparable with that of grain boundaries.     

Development and adoption of measures for increasing the safety of power-generating units of nuclear power plants with RBMK reactors in 1986–2005

The basic stages and directions of upgrading and reconstruction of the power-generating units of nuclear power plants with RBMK reactors over a period of 20 yr since the Chernobyl accident are reflected in this paper. The greatest amount of work was done in 1986–1990 on all units with RBMK-1000 and-1500 reactors which were operating at that time in the USSR. The purpose of the upgrade was to improve the neutron-physical characteristics of the reactor cores, increase the response speed of the safety and control system and decrease the positive effect of water outflow from the cooling loop of this system, increase the flow capacity of the systems performing emergency discharge of the steam-gas mixture from the reactor, and improve the basic operating documentation. The subsequent stages of the upgrading and reconstruction concerned mainly the first-generation power-generating units (Nos. 1 and 2 units of the Leningrad and Kursk nuclear power plants). These works were performed to make the power-generating units conform to the requirements of the modern normative documents on safety and allow for the possibility of these units to remain in operation after the nominal 30-yr service life has been exhausted. __________ Translated from Atomnaya énergiya, Vol. 100, No. 4, pp. 312–320, April, 2006.     

Dual Gabor frames: theory and computational aspects

We consider a general method for constructing dual Gabor elements different from the canonical dual. Our approach is based on combining two Gabor frames such that the generated frame-type operator S/sub g,/spl gamma// is nonsingular. We provide necessary and sufficient conditions on the Gabor window functions g and /spl gamma/ such that S/sub g,/spl gamma// is nonsingular for rational oversampling, considering both the continuous-time and the discrete-time settings. In contrast to the frame operator, the operator S/sub g,/spl gamma// is, in general, not positive. Therefore, all results in Gabor analysis that are based on the positivity of the frame operator cannot be applied directly. The advantage of the proposed characterization is that the algebraic system for computing the Gabor dual elements preserves the high structure of usual Gabor frames, leading to computationally efficient algorithms. In particular, we consider examples in which both the condition number and the computational complexity in computing the proposed dual Gabor elements decrease in comparison to the canonical dual Gabor elements.     

Automation of Thermotechnical Machinery in Glass Production

The operating principles of automated control system for glass-melting furnaces and drums for drying sand and dolomite are described.__________Translated from Steklo i Keramika, No. 4, pp. 20 – 22, April, 2005.     

Modular and rapid testing of SOCs with unwrapped logic blocks

Extensive research has been carried out for test planning of core-based system-on-a-chip devices. Most of the prior work assumes that all of the embedded cores are wrapped for test purpose. However, some designs may contain user-defined logic or cores that cannot be wrapped due to area constraints or timing violations. This paper discusses how these unwrapped logic blocks can be tested rapidly by adapting the TestRail architecture, which uses only the test control mechanism and the test instructions available through the IEEE 1500 standard for embedded core test. A new test scheduling algorithm, which facilitates a concurrent test of both unwrapped logic blocks and IEEE 1500-wrapped cores, is proposed, and experiments show that it outperforms a previous approach when the available number of tester channels and/or the number of unwrapped logic blocks are small.