Characterization and catalytic gasification of the aqueous by-product from vacuum pyrolysis of biomass

Spruce wood residues were treated in a vacuum pyrolysis Process Development Unit with a throughput capacity of 28 kg/h. Two aqueous phase condensate samples with COD concentration varying between 190 and 255 g/L were produced and sequentially extracted with dichloromethane and ethylacetate solvents. The soluble organic matter was composed of acidic, phenolic, alcoholic and ketonic compounds. The insoluble fraction was sequentially distilled at 100 and 110°C under atmospheric pressure. Mainly water was recovered in the first distillate, while the second distillate contained 30.4% formic and acetic acids, 69.4% water and 0.2% residual organic compounds. The distillation residue was rich in oxygen and was essentially insoluble in any organic solvent. The two aqueous phase pyroligneous samples were treated in Bat-telle's Thermochemical Environmental Energy System (TEESr?), a registered service mark of Onsite*Ofsite, Inc. of Duarte, California, U.S.A. The results of the tests showed that similar results were obtained with either feedstock. In batch tests a COD reduction of 99% was achieved. The product gas composition was typically about 49% methane, 5% hydrogen, 1 % ethane and 45% carbon dioxide. Tests in a continuous stirred-tank reactor produced reproducible data which can be used for process scale-up. Catalyst lifetime was identified as needing further improvement. The preliminary results demonstrated the technical feasibility of the catalytic gasification process as a useful step in the recovery of energy from the secondary condensate stream and the cleanup of the by-product water from vacuum pyrolysis of wood.     

A distributed approach for access and visibility task with a manikin and a robot in a virtual reality environment

This paper presents a new method, based on a multi-agent system and on a digital mock-up technology, to assess an efficient path planner for a manikin or a robot for an access and visibility task taking into account ergonomic constraints or joint and mechanical limits. In order to solve this problem, the human operator is integrated in the process optimization to contribute to a global perception of the environment. This operator cooperates, in real time, with several automatic local elementary agents. The result of this work validates solutions through the digital mock-up; it can be applied to simulate maintainability and mountability tasks.     

Improved genetic algorithm for channel allocation with channel borrowing in mobile computing

This paper exploits the potential of the Genetic Algorithm to solve the cellular resource allocation problem. When a blocked host is to be allocated to a borrowable channel, a crucial decision is which neighboring cell to choose to borrow a channel. It is an optimization problem and the genetic algorithm is efficiently applied to handle this. The Genetic Algorithm, for this particular problem, is improved by introducing a new genetic operator, named pluck, that incorporates a problem-specific knowledge in population generation and leads to a better channel utilization by reducing the average blocked hosts. The pluck operator makes the crucial decision of when and which cell to borrow with the future consideration that the borrowing should not lead the network to chaos. It makes a channel borrowing decision that minimizes the number of blocked hosts and improves the long-term performance of the network. Efficacy of the proposed method has been evaluated by experimentation.     

Cover Picture: Programmable Motion and Separation of Single Magnetic Particles on Patterned Magnetic Surfaces (Adv. Mater. 14/2005)

Structured magnetic surfaces enabling programmable motion of single micrometer‐sized magnetic particles are reported on p. 1730 by Gunnarsson and co‐workers. Patterns of thin‐film magnetic elements are tailored to form transport lines with junctions for the separation of individual particles. This method has the potential to improve and generate new applications in biotechnology. The cover shows a schematic of the transportation and separation of magnetic particles functionalized with antibodies capable of selectively capturing the corresponding analytes from a sample.     

Thermoplastic vulcanizates obtained by reaction-induced phase separation: Interplay between phase separation dynamics,final morphology and mechanical properties

Reaction-induced phase separation (RIPS) of miscible blends of poly(?-caprolactone) (PCL) and an epoxy resin based on poly(propylene oxide) (PPO) was used to prepare thermoplastic vulcanizates (TPVs) with fine rubber dispersions. Scanning electron microscopy (SEM) confirmed the formation of cross-linked rubber particles dispersed in the thermoplastic matrix at PCL contents ≥20 wt%. The morphology development during phase separation was studied by optical microscopy (OM) and time-resolved small-angle light scattering (SALS). It was shown that higher curing temperatures lead to a decrease in rubber particle size, but at the same time lead to an increase in the extent of particle connectivity. In some cases, gelation of the PPO-rich phase limits full structure development, which leads to extensive connectivity between the dispersed rubber particles and a strong deterioration in tensile properties.     

Mutation of either of two cysteine residues or deletion of the amino or carboxy terminus of nonstructural protein NS1 of bluetongue virus abrogates virus-specified tubule formation in insect cells

Virus-specific tubules are characteristic of orbivirus infections and are likely to play an important role in virus morphogenesis. It has been shown that for bluetongue virus (BTV), the prototype orbivirus in the family Reoviridae, the virus-encoded NS1 protein forms tubules in insect cells when the BTV segment M6 gene is expressed by using a baculovirus vector. To understand the function of NS1 tubules and to identify the sequences involved in their polymerization, a series of mutant NS1 genes was generated and expressed in insect cell cultures by using baculovirus vectors. Three of the mutants were deletion mutants. One (AcNS1.dNT10) lacked 10 of the amino-terminal amino acids, and the other two mutants (AcNS1.dCT20 and AcNS1.dCT43) lacked 20 or 43 of the carboxy-terminal amino acids. In addition, site-directed mutants were constructed in which various single cysteines or pairs of cysteines were changed to serines. The ability of each mutant protein to form tubules was investigated. None of the deletion mutants formed tubules. The constructs in which the cysteines at amino acid positions 337 and/or 340 were replaced by serines (e.g., AcNS1.C337S,C340S) also did not form tubules. Instead, the NS1 protein of these and the deletion mutants made ribbon-like structures which formed large aggregates. Mutations involving six other cysteines (i.e., AcNS1.C37S,C43S,AcNS1.C462S,C465S, AcNS1.C104S, and AcNS1.C364S) produced tubules. The results show that both the amino and carboxy termini of the NS1 protein molecule and the cysteines at residues 337 and 340 are essential for tubule formation.