Carbon nanotube reinforced aluminum composite coating via cold spraying

Multiwalled carbon nanotube (CNT) reinforced aluminum nanocomposite coatings were prepared using cold gas kinetic spraying. Spray drying was used to obtain a good dispersion of the nanotubes in micron-sized gas atomized Al-Si eutectic powders. Spray dried powders containing 5 wt.% CNT were blended with pure aluminum powder to give overall nominal CNT compositions of 0.5 wt.% and 1 wt.% respectively. Cold spraying resulted in coatings of the order of 500 μm in thickness. Fracture surfaces of deposits show that the nanotubes were uniformly distributed in the matrix. Nanotubes were shorter in length as they fractured due to impact and shearing between Al-Si particles and the Al matrix during the deposition process. Nanoindentation shows a distribution in the elastic modulus values from 40-229 GPa which is attributed to microstructural heterogeneity of the coatings that comprise the following: pure Al, Al-Si eutectic, porosity and CNTs.     

Amebic keratitis in a wearer of disposable contact lenses due to a mixed Vahlkampfia and Hartmannella infection

PURPOSE: To support the hypothesis that Acanthamoeba is not a unique cause of amebic keratitis, we report a case of amebic keratitis in which viable Acanthamoeba could not be isolated from corneal tissue. Vahlkampfia and Hartmannella, two other genera of free-living ameba, were isolated, however, using prolonged culture. METHODS: A 24-year-old wearer of soft contact lenses had keratitis. Extensive histologic and microbiologic investigations were performed on corneal scrape, biopsy, and keratoplasty tissue. Contact lenses, storage case, and the home water supply, where contact lens hygiene was practiced, were examined for the presence of micro-organisms. RESULTS: No viruses, pathogenic bacteria, or fungi were detected from corneal tissue samples. Amebae were observed using light and electron microscopy, but these could not be unequivocally classified using immunocytochemical staining. Viable Vahlkampfia and Hartmannella, but no Acanthamoeba, were isolated from the corneal biopsy sample. Indirect immunofluorescence with a range of polyclonal rabbit antisera raised against axenically cultivated stains of the three amebal genera was unhelpful because of cross-reactivity. A diverse range of micro-organisms was present within the storage case, including the three amebal species. Amebic cysts also were associated with the contact lens. CONCLUSION: A mixed non-Acanthamoeba amebic keratitis has been identified in a wearer of soft contact lenses where lack of storage case hygiene provided the opportunity for the free-living protozoa Vahlkampfia and Hartmannella to be introduced to the ocular surface. When Acanthamoeba-like keratitis occurs, but where Acanthamoeba cannot be isolated using conventional laboratory culture methods, alternate means should be used to identify other amebae that may be present. Polyclonal immunofluorescent antibody staining was unreliable for generic identification of pathogenic free-living amebae in corneal tissue.     

A Novel Content Aware Channel Allocation Scheme for Video Applications over CRN

Cognitive radio (CR) has emerged as an effective solution to spectrum scarcity problem which efficiently utilizes the unused spectrum of licensed primary user (PU). Video applications, as a bandwidth intensive and delay-sensitive application, will surely get benefitted from CR technology due to its ability to provide additional bandwidth to end users. In this article we investigate the challenges of quality of experience (QoE) driven video applications over CR networks due to the random behavior of PUs, dynamic characteristic of the primary channels, packet error rate etc. Generally, all video applications could be categorized into three groups like slight motion, gentle walking and rapid motion (RM) and each group has its own quality of service (QoS) requirements. The aim of this paper is to minimize QoE degradation by estimating the quality of the available channels based on our proposed Channel Quality Index metric and then allocating the channels depending on the QoS requirements of a particular video application. Extensive analysis validates that there is a performance enhancement of different video applications, especially RM type (nearly 66%) which is considered as most critical among all.     

Analytical prediction of resonant frequencies of annular stacked dielectric resonator antennas

The method of stacking dielectric resonators for designing multiband and wideband antennas has gained much attention in recent times. However, the existing works lack any theoretical framework for the prediction of resonant frequencies of such stacked structures. In this work, a formal analysis using a cavity model with the mode matching technique is presented to determine all the existing resonant frequencies of annular stacked cylindrical dielectric resonator antennas with and without air gap. The analysis is done separately considering the outermost sidewall of the stack as both perfect magnetic conductor and imperfect magnetic conductor. The theoretical findings are extensively validated against numerous simulations, as well as against a fabricated prototype. It is observed that the perfect magnetic wall condition provides results that are more accurate. The closed‐form equation derived in this work not only helps in accurately predicting the resonant frequencies but also reduces the run‐time manifolds compared to that of the existing trial and error based methods of design using software simulations.     

Implementation of enhanced forward pointer-based mobility management scheme for handling internet and intranet traffic in wireless mesh network

To implement WMN, IEEE 802.11s has been developed. The routing protocol for selecting a path between two mesh stations in IEEE 802.11s is hybrid wireless mesh protocol (HWMP). But mobility of external stations has not been considered in IEEE 802.11s. For handling movement of clients, many mobility management schemes have been proposed. Some of such schemes are: ANT, Mesh Mobility Management (M\(^{3})\), Infrastructure Mesh (iMesh), SMesh, MEsh networks with MObility management (MEMO), Wireless mesh Mobility Management (WMM), Static Anchor Scheme, Dynamic Anchor Scheme, LMMesh, Session-to-Mobility-Ratio based Scheme and Forward Pointer-Based Mobility Management Scheme (FPBR). But none of the schemes except FPBR have been integrated with IEEE 802.11s for providing mobility support to the external stations. FPBR has been proposed to enhance IEEE 802.11s for providing mobility support to external stations, but it can support internet traffic only. In WMN both internet and intranet traffic to and from the external station is important. In this paper, an improved version of FPBR named Enhanced FPBR (EFPBR) Scheme has been introduced to handle both internet and intranet traffic. Both EFPBR and HWMP have been numerically analyzed. HWMP and EFPBR schemes are simulated and the performances are compared. From the performance comparison, it can be observed that EFPBR performs better than that of IEEE 802.11s concerning throughput, end-to-end delay, routing overhead and average handoff cost. The number of route management packets transferred per handoff measured from numerical analysis and simulation has also been compared.     

Evaluation of Putative Allelochemicals in Rice Root Exudates for Their Role in the Suppression of Arrowhead Root Growth

In previous studies, 15 putative allelopathic compounds detected in rice root exudates were quantified by GC/MS/MS. In this study, multiple regression analysis on these compounds determined that five selected phenolics, namely caffeic, p-hydroxybenzoic, vanillic, syringic, and p-coumaric acids, from rice exudates were best correlated with the observed allelopathic effect on arrowhead (Sagittaria montevidensis) root growth. Despite this positive association, determination of the phenolic acid dose-response curve established that the amount quantified in the exudates was much lower than the required threshold concentration for arrowhead inhibition. A similar dose-response curve resulted from a combination of all 15 quantified compounds. Significant differences between the amounts of trans-ferulic acid, abietic acid, and an indole also existed between allelopathic and non-allelopathic rice cultivars. The potential roles of these three compounds in rice allelopathy were examined by chemoassay. Overall, neither the addition of trans-ferulic acid nor 5-hydroxyindole-3-acetic acid to the phenolic mix significantly contributed to phytotoxicity, although at higher concentrations, trans-ferulic acid appeared to act antagonistically to the phytotoxic effects of the phenolic mix. The addition of abietic acid also decreased the inhibitory effect of the phenolic mix. These studies indicate that the compounds quantified are not directly responsible for the observed allelopathic response. It is possible that the amount of phenolic acids may be indirectly related to the chemicals finally responsible for the observed allelopathic effect.     

Symbolic predictive analysis for concurrent programs

Predictive analysis aims at detecting concurrency errors during runtime by monitoring a concrete execution trace of a concurrent program. In recent years, various models based on the happens-before causality relations have been proposed for predictive analysis. However, these models often rely on only the observed runtime events and typically do not utilize the program source code. Furthermore, the enumerative algorithms they use for verifying safety properties in the predicted traces often suffer from the interleaving explosion problem. In this paper, we introduce a precise predictive model based on both the program source code and the observed execution events, and propose a symbolic algorithm to check whether a safety property holds in all feasible permutations of events of the given trace. Rather than explicitly enumerating and checking the interleavings, our method conducts the search using a novel encoding and symbolic reasoning with a satisfiability modulo theory solver. We also propose a technique to bound the number of context switches allowed in the interleavings during the symbolic search, to further improve the scalability of the algorithm.     

Mechanical characterization of microwave sintered zinc oxide

The mechanical characterization of microwave sintered zinc oxide disks is reported. The microwave sintering was done with a specially designed applicator placed in a domestic microwave oven operating at a frequency of 2.45 GHz to a maximum power output of 800 Watt. These samples with a wide variation of density and hence, of open pore volume percentage, were characterized in terms of its elastic modulus determination by ultrasonic time of flight measurement using a 15 MHz transducer. In addition, the load dependence of the microhardness was examined for the range of loads 0.1–20 N. Finally, the fracture toughness data (K _IC) was obtained using the indentation technique.