The stretch zone of automotive steel sheets

The paper deals with an experimental determination of the stretch zone dimensions in the notch tip in thin steel sheets. The stretch zone dimensions depend on steel grade, on the rolling direction as well as on the loading rate. Stretch zones were observed and measured on three steel grades. Fracture area and stretch zones were analysed by SEM. Stable crack growth was monitored by videoextensometry techniques on CT (Compact Tension) specimens. Specimens were loaded under two loading rates by eccentric tension, whereby the deformation in the notch surrounding area was recorded using a non-contact measurement–videoextensometry technique. Linear relation between the stretch zone dimensions was determined.     

An adaptive ARQ–HARQ interworking scheme in WiMAX systems

For reliable data transmissions, WiMAX systems support automatic repeat query (ARQ) that operates at the upper MAC and hybrid automatic repeat query (HARQ) that operates at the lower MAC and PHY. ARQ and HARQ schemes have their own weakness that results in low throughput and high delay in WiMAX systems. Although ARQ and HARQ schemes can complement with each other, they operate independently. Some studies focus on the benefits of the interaction between ARQ and HARQ schemes, but these studies have limitations. In this paper, we propose an adaptive ARQ and HARQ interworking scheme to provide reliable transmissions without performance degradation in WiMAX systems. The proposed scheme has five features that are designed to solve the weaknesses of the ARQ and HARQ schemes. We compare the proposed scheme with existing schemes that utilize the ARQ and HARQ interaction through simulations, and the simulation results show that the proposed scheme shows improved performance over existing schemes.     

Analytical method for fast screening and confirmation of multi-class veterinary drug residues in fish and shrimp by LC-MS/MS

A multi-class, multi-residue analytical method based on LC-MS/MS detection was developed for the screening and confirmation of 28 veterinary drug and metabolite residues in flatfish, shrimp and eel. The chosen veterinary drugs are prohibited or unauthorised compounds in Korea, which were categorised into various chemical classes including nitroimidazoles, benzimidazoles, sulfones, quinolones, macrolides, phenothiazines, pyrethroids and others. To achieve fast and simultaneous extraction of various analytes, a simple and generic liquid extraction procedure using EDTA-ammonium acetate buffer and acetonitrile, without further clean-up steps, was applied to sample preparation. The final extracts were analysed by ultra-high-performance liquid chromatography coupled with tandem mass spectrometry (UHPLC-MS/MS). The method was validated for each compound in each matrix at three different concentrations (5, 10 and 20 ng g^–1) in accordance with Codex guidelines (CAC/GL 71-2009). For most compounds, the recoveries were in the range of 60–110%, and precision, expressed as the relative standard deviation (RSD), was in the range of 5–15%. The detection capabilities (CCβs) were below or equal to 5 ng g^–1, which indicates that the developed method is sufficient to detect illegal fishery products containing the target compounds above the residue limit (10 ng g^–1) of the new regulatory system (Positive List System – PLS).     

Synthesis and characterization of the carbon nanotube-based composite materials with poly(3,4-ethylenedioxythiophene)

We report a procedure to prepare a conducting nano-composites composed of multi-walled carbon nanotubes (MWNTs) and PEDOT by using a poly(sodium 4-styrenesulfonate) (PSSNa) as a inter-linking molecule between MWNT and PEDOT. When PSSNa chains are introduced on the MWNTs via physicochemical interaction, the surface of MWNT becomes negatively charged, and PSS-modified MWNTs promote the effective association of the positively charged PEDOT chains. The resulting MWNT-PSS/PEDOT composites are characterized by a better interconnection between MWNT and PEDOT components.     

Design of sustainable V-based hydrogen separation membranes based on grain boundary segregation

Inter-diffusion between vanadium and palladium coating layers in vanadium-based hydrogen separation membranes is investigated by using a computational approach based on first-principles calculations and semi-empirical atomistic simulations, paying attention to the surface stability and the prevention of the degradation of hydrogen permeability. It is found that the governing mechanism of the inter-diffusion is the grain boundary diffusion, and therefore a diffusion barrier based on the grain boundary segregation of impurities can be an efficient way to inhibit the inter-diffusion that causes the degradation. An interesting aspect in previous experimental works that showed a good resistance to the inter-diffusion by an addition of a trace amount of yttrium is discussed from the view point of the grain boundary segregation. An experiment that proves the validity of the present alloy design scheme (inhibition of inter-diffusion using grain boundary segregation) is carried out, and a process to maximize the sustainability of the membrane is also proposed.     

Synthesis,characterization, and application of oligomer‐type‐based phosphites

Organic alkyl and aryl phosphites are effective antioxidants and photostabilizers with applications in a wide range of polymers. The primary role of phosphites is to decompose hydroperoxide. However, aryl phosphites are also capable of reacting as antioxidants by affecting the kinetics. In particular, oligomer‐type phosphites have a greater effect on polymer degradation because of their high compatibility, reactivity, and solubility with almost all polymers. Generally, phosphites are sensitive to hydrolysis. In order to overcome this hydrolytic sensitivity in phosphites, a novel hydrolytically stable oligomeric phosphite incorporating a sterically hindered aromatic alcohol (2,4‐di‐tert‐butyl‐6‐methylphenol) that gives hydrolytic stability to the phosphite was synthesized and characterized, and its performance as an antioxidant for polypropylene was investigated. J. VINYL ADDIT. TECHNOL., 22:146–155, 2016. © 2014 Society of Plastics Engineers     

Preparation of UV-curable emulsions using PEG-modified urethane acrylates: The effect of nonionic and anionic groups

To prepare self-emulsificable urethane acrylate resin, PEG-modified urethane acrylates (PMUA), containing polyoxyethylene chains as a terminal hydrophilic group and urethane acrylate anionomers (UAA) incorporated dimethylolpropionic acid (DMPA) as a pendant hydrophilic one were synthesized. For PMUA emulsions, the reaction molar ratio of PEG to 2-hydroxyethyl methacrylate (2-HEMA) significantly influenced the viscosity and droplet size of the emulsion and tensile strength of cured films. These emulsions were stable to pH change and the addition of electrolyte, but coagulated around 60°C. In the case of UAA, emulsions, however, were very stable to elevated temperatures and coagulated in adding even a little bit of electrolyte. For soap-free emulsions of the mixture of PMUA and UAA, emulsion stabilities of these mixtures against temperature, pH change, the addition of electrolyte, and the rate of shear and freeze–thaw increased synergetically. Additionally, the tensile strength of cured films was also improved. © 1996 John Wiley & Sons, Inc.     

An extrusion system for the processing of microcellular polymer sheets: Shaping and cell growth control

A new processing system for the extrusion of microcellular polymer sheets is presented. Specifically, the detailed design of a shaping and cell growth control system is discussed in the context of an overall extrusion system design with particular emphasis on the system level functional requirements of cell nucleation, cell growth, and shaping. The principle of the basic extrusion system design is to shape a nucleated polymer/gas solution flow under pressure and accurate temperature control. In this way, the initial cell growth is controlled so as to prevent degradation of the nucleated cell density during shaping. Two foaming die designs for satisfying the initial shaping and cell growth requirements are presented. Critical experiments are then presented which verified the concept of shaping a nucleated polymer/gas solution. Moreover, these experiments demonstrated the feasibility of the overall microcellular polymer sheet extrusion system design.