An adaptive ARQ–HARQ interworking scheme in WiMAX systems

For reliable data transmissions, WiMAX systems support automatic repeat query (ARQ) that operates at the upper MAC and hybrid automatic repeat query (HARQ) that operates at the lower MAC and PHY. ARQ and HARQ schemes have their own weakness that results in low throughput and high delay in WiMAX systems. Although ARQ and HARQ schemes can complement with each other, they operate independently. Some studies focus on the benefits of the interaction between ARQ and HARQ schemes, but these studies have limitations. In this paper, we propose an adaptive ARQ and HARQ interworking scheme to provide reliable transmissions without performance degradation in WiMAX systems. The proposed scheme has five features that are designed to solve the weaknesses of the ARQ and HARQ schemes. We compare the proposed scheme with existing schemes that utilize the ARQ and HARQ interaction through simulations, and the simulation results show that the proposed scheme shows improved performance over existing schemes.     

Analytical method for fast screening and confirmation of multi-class veterinary drug residues in fish and shrimp by LC-MS/MS

A multi-class, multi-residue analytical method based on LC-MS/MS detection was developed for the screening and confirmation of 28 veterinary drug and metabolite residues in flatfish, shrimp and eel. The chosen veterinary drugs are prohibited or unauthorised compounds in Korea, which were categorised into various chemical classes including nitroimidazoles, benzimidazoles, sulfones, quinolones, macrolides, phenothiazines, pyrethroids and others. To achieve fast and simultaneous extraction of various analytes, a simple and generic liquid extraction procedure using EDTA-ammonium acetate buffer and acetonitrile, without further clean-up steps, was applied to sample preparation. The final extracts were analysed by ultra-high-performance liquid chromatography coupled with tandem mass spectrometry (UHPLC-MS/MS). The method was validated for each compound in each matrix at three different concentrations (5, 10 and 20 ng g^–1) in accordance with Codex guidelines (CAC/GL 71-2009). For most compounds, the recoveries were in the range of 60–110%, and precision, expressed as the relative standard deviation (RSD), was in the range of 5–15%. The detection capabilities (CCβs) were below or equal to 5 ng g^–1, which indicates that the developed method is sufficient to detect illegal fishery products containing the target compounds above the residue limit (10 ng g^–1) of the new regulatory system (Positive List System – PLS).     

Synthesis and characterization of the carbon nanotube-based composite materials with poly(3,4-ethylenedioxythiophene)

We report a procedure to prepare a conducting nano-composites composed of multi-walled carbon nanotubes (MWNTs) and PEDOT by using a poly(sodium 4-styrenesulfonate) (PSSNa) as a inter-linking molecule between MWNT and PEDOT. When PSSNa chains are introduced on the MWNTs via physicochemical interaction, the surface of MWNT becomes negatively charged, and PSS-modified MWNTs promote the effective association of the positively charged PEDOT chains. The resulting MWNT-PSS/PEDOT composites are characterized by a better interconnection between MWNT and PEDOT components.     

Design of sustainable V-based hydrogen separation membranes based on grain boundary segregation

Inter-diffusion between vanadium and palladium coating layers in vanadium-based hydrogen separation membranes is investigated by using a computational approach based on first-principles calculations and semi-empirical atomistic simulations, paying attention to the surface stability and the prevention of the degradation of hydrogen permeability. It is found that the governing mechanism of the inter-diffusion is the grain boundary diffusion, and therefore a diffusion barrier based on the grain boundary segregation of impurities can be an efficient way to inhibit the inter-diffusion that causes the degradation. An interesting aspect in previous experimental works that showed a good resistance to the inter-diffusion by an addition of a trace amount of yttrium is discussed from the view point of the grain boundary segregation. An experiment that proves the validity of the present alloy design scheme (inhibition of inter-diffusion using grain boundary segregation) is carried out, and a process to maximize the sustainability of the membrane is also proposed.     

Titanium diffusion in shinbone of rats with osseointegrated implants

Dental implants are composed of commercially pure Ti (which is actually an alloy of titanium, and minor or trace components such as aluminium and vanadium). When the implant is inserted, its surface undergoes a number of chemical and mechanical processes, releasing particles of titanium to the medium. The metabolism of free ions of titanium is uncertain; the uptaking processes in the body are not well known, nor their toxic dose. In addition, physical properties of newly formed bone, such as diffusivity and activation energy, are scarce and rarely studied. In this study, we analysed the diffusion of titanium in the titanium‐implanted shinbones of six adult male Wistar rats by spatially resolved micro x‐ray fluorescence. The measurements were carried out at the microfluorescence station of the x‐ray fluorescence (XRF) beamline of the Brazilian synchrotron facility LNLS (from Portuguese ‘Laboratorio Nacional de Luz Sincrotron’). For each sample, XRF spectra were taken by linear scanning in area near the new bone formed around the Ti implant. The scanning line shows a clear effect of titanium diffusion whereas calcium intensity presents a different behaviour. Moreover, a clear correlation among the different structures of bones is observed in the Ti and Ca intensities. The results obtained in these measurements may allow determining quantitatively the parameters of diffusion rates and other physical properties of new bone like diffusion coefficients.     

Synthesis,characterization, and application of oligomer‐type‐based phosphites

Organic alkyl and aryl phosphites are effective antioxidants and photostabilizers with applications in a wide range of polymers. The primary role of phosphites is to decompose hydroperoxide. However, aryl phosphites are also capable of reacting as antioxidants by affecting the kinetics. In particular, oligomer‐type phosphites have a greater effect on polymer degradation because of their high compatibility, reactivity, and solubility with almost all polymers. Generally, phosphites are sensitive to hydrolysis. In order to overcome this hydrolytic sensitivity in phosphites, a novel hydrolytically stable oligomeric phosphite incorporating a sterically hindered aromatic alcohol (2,4‐di‐tert‐butyl‐6‐methylphenol) that gives hydrolytic stability to the phosphite was synthesized and characterized, and its performance as an antioxidant for polypropylene was investigated. J. VINYL ADDIT. TECHNOL., 22:146–155, 2016. © 2014 Society of Plastics Engineers     

An extrusion system for the processing of microcellular polymer sheets: Shaping and cell growth control

A new processing system for the extrusion of microcellular polymer sheets is presented. Specifically, the detailed design of a shaping and cell growth control system is discussed in the context of an overall extrusion system design with particular emphasis on the system level functional requirements of cell nucleation, cell growth, and shaping. The principle of the basic extrusion system design is to shape a nucleated polymer/gas solution flow under pressure and accurate temperature control. In this way, the initial cell growth is controlled so as to prevent degradation of the nucleated cell density during shaping. Two foaming die designs for satisfying the initial shaping and cell growth requirements are presented. Critical experiments are then presented which verified the concept of shaping a nucleated polymer/gas solution. Moreover, these experiments demonstrated the feasibility of the overall microcellular polymer sheet extrusion system design.     

应用覆膜支架介入救治颈动脉破裂并假性动脉瘤

目的探讨应用覆膜支架介入治疗颈动脉破裂并假性动脉瘤.方法4例肿瘤所致颈动脉破裂并假性动脉瘤形成的患者,均出现颈部或口腔危及生命的出血,采用Seldinger方法,选用自膨式聚四氟乙烯覆膜支架治疗.结果4例成功施行血管内介入治疗,其中颈总动脉中段1例,颈动脉球2例,颈总动脉远段1例.共置入覆膜支架6枚.术后假性动脉瘤腔被隔绝,颈动脉通畅,患者的临床症状明显改善,无神经功能障碍.1例患者11 d后支架下缘颈总动脉与原瘤腔相通,再次置入覆膜支架,2个月的随访无再出血.1例患者经钢圈栓塞、放置覆膜支架及裸支架瘤腔     

Effect of substrate on the phase transformation of TiO2 in pearlescent pigment

The TiO₂/substrate pearlescent pigments were prepared by the hydrolysis of TiOCl₂ on the substrate followed by a calcinations process. The natural mica (muscovite), synthetic mica (fluorophlogopite) and -alumina flake were selected as the substrates for pearlescent pigments. The effect of substrate on the anatase to rutile (A–R) phase transformation of TiO₂ was studied. The A–R phase transformation of TiO₂ during the preparation of pearlescent pigments and their proportion in the TiO₂ layer have been analyzed by XRD measurements. The phase compositions of TiO₂ layer in each pearlescent pigment are quite different depending on the substrates. The TiO₂ layer deposited on -alumina has higher rutile fraction than those on the natural and synthetic mica. The XPS analysis showed that the cations originally present in the substrates diffused into the TiO₂ layer. The TiO₂ layer deposited on -alumina contains Al, while those on the natural and synthetic mica substrates contain Si and K in addition to Al. The metal cations diffusing from the substrate into TiO₂ layer might retard the A–R phase transformation of TiO₂. The suppressing effect on the A–R transformation of TiO₂ by mixed cations seems to be much stronger than that of single cation, resulting in relatively higher rutile fraction in the case of TiO₂ layer deposited on -alumina.