The intervalley X6→Γ6, L6 scattering time in GaAs measured by ultrafast pump-probe infrared absorption spectroscopy

A direct measurement of the dynamics of electrons in the X₆ valley for a GaAs crystal by time-resolved absorption spectroscopy is reported for the first time. IR picosecond probe pulses were used to monitor the growth and decay of the population in the X₆ valley subsequent to excitation by a 527 nm pump pulse. The intervalley X₆→Γ₆, L₆ scattering time t_x of 0.70 ± 0.50 ps is determined and the crossection for the X₆→X₇ transition is estimated to be 1.8 × 10⁻¹⁶ cm².     

等径侧向挤压应变分析

对等径侧向挤压变形的应变进行了深入的分析，应用平面纯剪切变形应变分析的结果，得到了等径侧向挤压变形真应变和等效真应变的计算公式，分析了循环等径Ｓ型侧向挤压真空应变和等效真应变的变化规律。     

Effects of EGb 761 on nitric oxide and oxygen free radicals, myocardial damage and arrhythmia in ischemia-reperfusion injury in vivo

The cardioprotective effects of EGb 761 on the release of nitric oxide (NO), the concentration of serum thiobarbituric acid reaction substance (TBARS), the activity of creatine kinase (CK) and the incidence of ventricular arrhythmias were investigated in myocardial ischemia-reperfusion injury in vivo. Using sodium nitrite (NaNO2) as standard source of nitric oxide (NO), we compared the correlation coefficients of the three measuring methods used currently in the determination of NOFe2+(DETC)2 complex with that of the measuring method suggested in this study. The result showed that measuring the whole height of three splitting signals is the best linear correlation to the concentration of NO comparing with other methods in this system. Using this method, we observed the effects of EGb 761 on NOFe2+(DETC)2 complex in myocardial ischemia-reperfusion injury in vivo. The hearts of the Wistar rats were subjected to 30 min of ischemia and 10 min of reperfusion in vivo. Different doses of EGb 761 (25, 50, 100, 200 mg/kg i.p.), superoxide dismutase (SOD, 10(4) U/kg), l-arginine (50 mg/kg i.p.) and nitric oxide synthase (NOS) inhibitor NG-nitro-l-arginine (NNA, 50 mg/kg i.p.) were administered to the ischemia-reperfusion rats. EGb 761 under the dose of 100 mg/kg increased the signal intensity of NOFe2+(DETC)2 complex, while EGb 761 at 200 mg/kg showed an effect of decreasing the signal intensity of NOFe2+(DETC)2 complex. EGb 761 inhibited the formation of TBARS, the release of CK, and mitigated the incidence of ventricular arrhythmias in a dose dependent way. Both l-arginine and SOD increased the signal intensity of NOFe2+(DETC)2 complex and inhibited the formation of TBARS, the leakage of CK and the incidence of ventricular arrhythmia. NNA not only had no protective effects on myocardial injury, but also increased the incidence of reperfusion-induced arrhythmia. In conclusion, EGb 761 has cardiovascular protective effects by means of adjusting the level of NO and inhibiting oxygen free radicals induced lipid peroxidation in myocardial ischemia-reperfusion injury in vivo.     

As,Sb,Sn对30CrMnSiA钢力学性能的影响

在３０ＣｒＭｎＳｉＡ钢中加入不同量的Ａｓ，Ｓｂ，Ｓｎ元素，研究了这些元素单独存在及复合存在时对钢的强度，塑性，冲击韧度及韧脆转变温度的影响规律，并用扫描电镜及俄歇能谱分析了Ａｓ，Ｓｂ，Ｓｎ导致晶界脆化的机理。     

Designing the MPC105 PCI bridge/memory controller

The MPC105 peripheral component interconnection bridge/memory controller provides a platform-specification-compliant bridge between Power PC microprocessors and the PCI bus. With it, designers can create systems using peripherals already designed for a variety of standard PC interfaces. This bridge chip also integrates a secondary cache controller and high-performance memory controller that supports DRAM or synchronous DRAM and ROM or flash ROM     

Rate sensitivity of high birefringent fiber optic sensors underlarge dynamic loads

New experimental studies on the effects of large dynamic compressive loads on highly birefringent optical fibers are presented. The intensity rate of applied dynamic loads ranged between 2.18-6719 KN/m-sec. A Fibercore (previously York) HB600 Bow-Tie fiber with an initial beat length of 1.16 mm was employed in the present study. Sensor response is discussed in terms of the effects of force amplitudes and velocities on the calibration parameter T_f. T_f is a function of the amplitude as well as the velocity of applied loading. Therefore, calibration of the sensor should be achieved through regression analysis of the load-fringe data for the entire spectrum of the desired force velocities. The ramification of this finding is that a single experiment for the measurement of T_f cannot provide the required parameters for calibration. This further implies that the change in beat length is also dependent on the amplitude and velocity of loading. The suggested method takes both effects into account through empirical analysis of experimental data     

Free vibration of laminated plates using a finite strip method based on a higher-order plate theory

The finite strip method based on the higher-order plate theory is developed for determining the natural frequencies of laminated plates. This method can accurately predict the through thickness effect of transverse shear deformation. Furthermore, only a few degress of freedom are required in the finite strip method. Some numerical results for various span-to-thickness ratios, material properties and stack sequences are presented for illustrative purposes. The present model provides a better way to obtain more accurate natural frequency results.     

Self-care behaviors, self-efficacy, and social support effect on the glycemic control of patients newly diagnosed with non-insulin-dependent diabetes mellitus

The purpose of this study was to explore the glycemic control and influencing factors in outpatients newly diagnosed with non-insulin-dependent diabetes mellitus (NIDDM). By purposeful sampling, data were collected from 130 outpatients with NIDDM at one medical center in Kaohsiung. The results indicated: (1) the mean value for HbA1C was 7.12%; and 63.1% of the patients belonged to moderate to well controlled group; (2) male patient's HbA1C value was significantly lower than female patient's; patients with no religious belief also had a lower HbA1C value than patients with a religious background; (3) there were strongly negative correlations between self-care behaviors, social support, and self-efficacy and HbA1C; (4) using a multiple stepwise regression analysis, religious belief and self-care behaviors were found to explain 10.9% variance of HbA1C level. The results of this study could be used as a reference for diabetes health education program.     

Millimeter-wave asymmetric Fabry-Perot modulators

We have designed, fabricated, and characterized GaAs-AlGaAs (λ=864 nm) asymmetric Fabry-Perot modulators with ≈37 GHz modulation frequency response, comparable to the fastest waveguide modulators. The modulation response saturates at high optical powers due to saturation of the excitonic absorption and heating effects, but the frequency response is independent of the incident optical intensity, since it depends only on the RC time constant, and not on the carrier transit time. The device design takes advantage of the fact that the quantum-confined Stark effect is more pronounced at some distance from the absorption edge to achieve a modulator with ⩾20 dB contrast and ≈3 dB insertion loss for ±2 V operating voltage, but only 21 fF capacitance. The DC bias used to move the operating point off the absorption edge has the additional benefits of improving the linearity and chirp of the device, as well as the saturation intensity. Here we present measurements of the modulation and photocurrent responses of the modulators, calculate the RC and transit times for the device, analyze the saturation mechanisms, and discuss the linearity and chirp of the device from the perspective of a high-speed digital optical communications system     

Synthesis and Properties of the Bi-Based Superconducting Powder Prepared by the Pechini Process

Bi-based superconductors are of great interest in high-temperature superconductors. We describe what is believed to be the first synthesis of these materials using the Pechini process, a low-temperature synthetic method that often yields inorganic oxide of excellent phase purity and well-controlled stoichiometry. Using this process, it has been possible to synthesize phase-pure Bi-2223 phase by calcining the appropriate polymeric precursors in air at 800°C for several hours. The superconductivity studies show that the Pechini-synthesized materials appear to offer high-quality performance.